The funny thing about the PJO cabin system is that everyone's always all 'oh the twelve' this and 'the twelve' that but that's absolutely not even remotely accurate. To start, right off the bat it's thirteen, not twelve, because they don't count Hades. But not really because before Percy, there were no big three kids, so we're down to ten active cabins already but it's actually eight because Artemis and Hera don't make demigods.
And of those eight, Mr. D is stuck at camp (thus not really making new demigods all that often) and his only two kids don't even sleep in a cabin, they sleep in the Big House with him.
So, pre-Percy, there are seven active cabins at Camp Half-Blood:
Glee club, the Jocks, the Nerds, the Geeks, the Farmers, the 'Sketchy Kids' and the Popular Kids.
Or, in other words, the Apollo, Ares, Athena, Hephaestus, Demeter, Hermes (and the unclaimed kids) and Aphrodite cabins.
What's cool is that you can already see the cabin dynamics in the show. For example, the Athena cabin allies with the Hermes cabin for the numbers. The Hermes kids plus all the unclaimed kids? It's the biggest cabin in the camp by far. It's a battle strategy. Luke and Annabeth's close relationship is just the cherry on top for Annabeth. It'll be really cool to see how the show develops the differences in the cabins during the series.
3K notes
·
View notes
Joker is fully aware of the fourth wall. So he should be aware how outmatched he is along with other fic tropes, so...
Joker: OUTTA MY WAY! OUTTA MY WAY! CAN'T YOU SEE HE'S GOING TO KICK MY BUTT?! *points to Danny*
Danny: Hey there clown people, nice night we're having
Harley: So you like kicking butts, do ya little boy?
And later on
Danny: I love the clown people
Harley: How many times must I teach you this lesson, little boy?
augh, I can’t tell you how much I love this. No hate to any of the great fic writers here, but I’m more than a bit burned out on how the Joker is basically killed off all the time in dpxdc. Killing the Joker will not make Jason feel better, I’m sorry. And also I’d think the Joker would become a ghost and be 10000% more of a maniac. Anyways, enough of that, onto the ask.
The Joker takes one good look at Danny, one of the hostages, and immediately tells his men to free him. Looking at that half-ghost kid gives him the creeps. So now Danny has to stand(or sit if he wants, Joker knows people get tired ya know)in the corner that is furthest away from him, turned away so he can’t see Danny’s face.
And when the Bats come in, he barely pays attention to them, just keeps his eyes on Danny because he knows that he’s more of a threat than Batsy is. The Joker doesn’t even care about the other hostages anymore he just wants that kid gone.
Then his goons end up kidnapping Danny again and the Joker dies a bit inside. He would just shoot the dumb goons, but that stare Danny has(which looks and is completely normal)has the Joker quaking in his boots. And Danny keeps getting accidentally kidnapped, so the Joker just treats him really well, offering tea and stuff. Ugh, this would be such a good The Batman episode, just the Joker being super nice and friendly and scared of just this random guy. A random guy who turns out to be not so normal.
405 notes
·
View notes
I've always wanted to learn bookbinding, ever since I was a wee little nerd, but there are a lot of things I've always wanted to learn, and this one has both a daunting upfront materials cost and a daunting upfront research cost. however, my sister is a jewel among siblings and gave me for christmas last year a handy dandy bookbinding manual, a block of good paper, and a little bag of tools.
but I still didn't have a suitable workspace, nor any of the many important tools and materials that she didn't include in her gift. so I just read the manual and pined. until maybe a month ago I got fed up with pining, flattened a cardboard box for a cutting mat, and went to town.
and I'm real proud of myself, so here's me rambling, plus photos!
I went to the thrift store and got glue + some fabric to bind the cover, went to Michaels for a paintbrush (and later went back for a metal ruler lmao it's amazing how useful it is to have a straightedge for cutting the paper), and...could not find material for the cover boards. so I went home and pined some more. but the urges were too strong, so after a couple hours of moping I got a stack of printer paper at the grocery store (I could not bring myself to use the good paper for my first, inevitably weak attempts, I just couldn't do it) and started making a little booklet. which was a great idea, it turned out, since it makes for good practice with cutting the paper, measuring things, punching holes in the signatures, etc.
I have a big box of greeting cards from Michaels, which I used for the covers. it didn't feel like I was making a Real Book, so I got some colored paper from the stationery store and used that for end papers.
so fancy~
galvanized by this success, I ordered a stack of chipboard online to use for cover boards; and once I was confident that I could cut paper without making it look too stupid (getting that straightedge ruler sure helped lol), I made signatures out of the good paper, left them under some heavy books overnight since I don't have a book press, and then punched holes in them! (huzzah for this nice video on getting the holes right)
my sister's gift included good linen thread. it's unwaxed, but after some poking around on r/bookbinding it looks like that just means I'll have to be more careful to avoid tangles and keep good tension. I am fine with this. I can be extra attentive. (I considered just running it over a beeswax candle, but one commenter said if your wax has paraffin in it, it could melt in a hot car, ruining the spine. I can't guarantee my candle is 100% beeswax, I didn't make it, so maybe we just move on.)
I don't have good linen fabric to use for the tapes, but the important part there is that the fabric be thin, sturdy, and not stretchy. the probably-cotton I got from the thrift store fits the bill, so it'll do!
this is a french link stitch, which I got from this exceedingly good tutorial. apparently it's strong enough on its own that for a book of this size, I don't actually need tapes, but I'd already cut the things so eh here we are. and tapes plus french link will make it a stronger binding still (according to a friendly redditor on r/bookbinding), so we carry on.
specifically we carry on to the gluing step. now as I mentioned, I do not have a book press, and you....kinda need one for this step. you need to hold the book block in place with the signatures facing upwards, pressed together hard enough that the glue won't run down between them and stick the pages together (though you do want the glue to get between them just a little, just for like a 16th of an inch). you at least need some clamps and a couple boards to sandwich the book block with.
but you know what? I'm not a professional, this is my first ever book, if it's a little bit off it'll be fine. so we grab all the heaviest books off the bookshelf and improvise.
it's fine! I'm sure it's fine! and just in case it's not, I've tucked a bit of cardboard underneath to catch any glue that drips down so it won't land on the floor. see? I'm prepared! I'm acing this.
and actually, it really was fine. I used clear elmer's glue, applied with a flat paintbrush from the art supplies aisle at Michael's, and frankly I liked the way the flat paintbrush let me slip glue in between the signatures. I did poke around on a couple bookbinding sites to see what kind of glue I should use, and the gist is that although there are better options than this, elmer's glue is perfectly serviceable, and the main downside is it's not archival grade. but I don't need my first bookbinding attempts to last 200 years, that's fine.
the next step is to add the mull. mull is a specific type of fabric – extremely loose-weave linen – and the idea is to paste it down over the spine to essentially hold the tapes and signatures all in place in relation to each other.
but I don't have mull! so I'm using more of the thrift store probably-cotton, because it's thin enough and not really stretchy at all. I'm sure this will be fine too. I painted a layer of glue onto the spine, then left it to dry a bit while I measured and cut the fabric, then painted a generous stripe of glue down the center, where it'll affix onto the spine. then I added a bit more glue to the spine, just to be sure, and pressed the mull into place, rubbing it thoroughly to make sure it's firmly affixed to every signature, with no creases in the fabric or air bubbles beneath it.
honestly I might have overdone it on the glue. I've never done this before, I don't know! I think it's okay, though – I tried not to ever let it become a thick layer, just a slight coating, since the danger of too much glue is that it might crack once dry and weaken the spine.
and now we leave it in the press overnight to dry, and pick up the next step in the morning!
489 notes
·
View notes