R.P Alloys caters to heavy engineering needs with an in-house casting and machining shop equipped with the capability to manufacture almost every equipment our clients require. Our industrial gears are already a name to reckon with and find application in a wide variety of industries like Mining, Cement, and Power.
Visit:- https://www.rpalloys.com/
0 notes
-- RP: @pokemon-experiments
pokemon-experiments:
He chuckled a bit about the confusion of making Mewtwo a spoon. "She had seen where people had drawn him with a comically large spoon on her mother's computer. So she wants to give him the very large spoon." With that said he would carefully remove one of his legs and set it down. If any of them wanted to look at it he'd be okay with that. As long as they didn't try to take it apart without the proper tools.
He was no smith by any means. If anything he understood the chemical side of things. How to make various alloys and steel. Also how to get a forge to redicously high temperatures. So if they needed any help with that he'd be more than happy to help them out.
"I'll probably go when my niece is ready. For now, I'll rest and take in the dense fae energy. Maybe get to know your team and answer any questions they might have." He would than lean back against the wall and close his eyes using Aura Sense to take in everything around him. It was nice to meet more residents of the ranch, though it would mean expanding his patrol area.
[ Mighty kind of you. Well, if that's what you're after, i'll get everyone to work. ] With that, she picks up her hammer and gives a rallying cry. Everyone turns, running over, minus Ruko and Willow of course as in Fae, Tinkerbell explains to the pokemon what Willow wanted and why, as well as Ruko's offer to study the machinery -- but no taking.
Willow hurries over to her uncle, grabbing hold of his arm and picking up on the bits of Fae, explains in her broken Unovan as best she can that Tinkerbell is just reiterating things spoken before. Once all had been said, the pokemon let out a rallying cry before hurrying off with multiple pieces of parchment of this large 'spoon' to get started on the various bits and pieces of it.
A few Tinkatink approached Ruko, putting their hammers down and motioning to his legs. "Th'y w'n'a s'e h'w y'ur l'gs w'rk, Unkwool." Willow explained, releasing him now and waiting for him to get up, the several Tinkatink eager to see how he moved and for the sounds in particular.
Tinkerbell kept an eye nearby, setting her hammer down, watching over her forge closely, but mostly to make sure Ruko and Willow weren't bombarded.
2 notes
·
View notes
The Best Pruners for Gardening
Every person who loves gardening always wants their garden to blossom with flowers. But for that, you need high-quality pruners. Gardening pruners are the need of everyone, whether you are an amateur gardener or a professional horticulturist. They are accommodating when it comes to sustaining the beauty of your garden by maintaining its state. These pruners are invaluable to all those interested in handling plants, whether big trees or small flowering plants. Pruners are meant to give life to the plants. They are used to remove unwanted elements that can hinder the thriving potential of the plants. Pruning activities include eliminating certain parts of the plants like branches, buds, and roots.
Here is the list of some of the best gardening pruners for all those who love gardening and want to see their gardens full of well-maintained flowers. Our selection of these pruners is based on the research and reviews received by these pruners.
Felco 2 Classic Manual Hand Pruner
Felco 2 has topped among all gardening pruners due to its features. The pruner is not only easy to use and repair, but also it is durable and smooth. It will require you to exert only a slight force while cutting thick branches due to its soft opening and bypass blades. The plastic coating of forged aluminum alloy on its handles has made it unbreakable and easy to repair. Besides, it has strong blades of hardened steel, making it capable of withstanding sharpening even dozens of times. You can most significantly find replacement parts very quickly and widely for your pruner if its function has been worn out. The lovers of gardening and gardeners widely admire it. It serves the best when it comes to trimming and clipping delicate branches, shrubs, flowers, and perennials due to its specifically designed blades.
ARS HP-VS8Z
If you are yearning for the perfect pruner, then ARS HP-VS8Z can give you the utmost satisfaction. It’s worth getting due to its significant features. The tool is excellent when it comes to getting perfect cleaning, flat cutting in soft stems, hardwood dowels, woody growth, and even crushing and tearing of buckthorn branches of about 3/4 inches. The stunningly sharp blades made of high carbon steel have been modified for resilience and hardness. Besides, the availability of tight and precise tolerance between the two edges of the pruner makes its cutting action smooth. The presence of aluminum handles in the plastic coating has made it easy for the users to hold it and move as per their needs and get easy cutting. However, its pricing is inconsistent, but it is available widely everywhere.
Corona BP 3180
Corona BP 3180 can be considered as a great budget pick. It has enough sharp blades that can slice through thick branches and spindly stems efficiently and swiftly. Moreover, you can cut branches of about 2/4 inches one-handed with this pruner. Also, it accepts replacement springs, blades, and screws. The pruner has large enough handles splaying out widely. The introduction of forging compact molecules of steel in the pruner has made it the most durable and most robust to give maximum performance. The pruner’s hook and blade design are of much use for the users for providing precise, close, and clean cuts.
Our other picks that are giving tough competition to these pruners
The Felco 6 is the smaller version of Felco 2 with the same sharp blades and efficient functionalities. However, the handles are slightly shorter, giving a smaller capacity and lighter weight. The pruner can be an excellent option for users whose hands are fast. The other Felco model is Felco 14, a smaller model but an excellent one for consistent performance. Apart from these, the Tierra Pro 38-1713 7.5 and Tierra Pro 38 1710 8.5 bypass pruning shears are equally swift and efficient in giving clean cuts.
Our next favorite pick includes the Okatsune 101 7-inch bypass pruners, which can be the favorite for the bonsai enthusiasts. The pruner is made of Izumo Yasuki Japanese steel delivering a Rockwell hardness of about 60+/-1. In simple terms, the pruner can stay sharp for a longer time than the other pruners. The pruners can cut the dowels and live branches correctly and quickly. The Burgon & Ball Professional compact Bypass Secateur GTO/PRL gives similar performance as Okatsune. Similarly, the Tierra Garden 35-1731 Ergo Forged bypass pruners do also not have the same level of performance as the Tierra Pro model, but they can cut scallions swiftly and correctly; however, they tend to crush the Norway maple branches and dowels.
The Burgon & Ball RHS GTO/SC Bypass Secateur is respectable, opening wide and snapping hard at shutting. It can cut dowels of about 1/2 inches and buckthorn branches of about 3/4 inches when you will force it with your two hands. Besides, it can make flat and good cuts in live branches.
The Fiskars Quantum Hand Pruner can’t cut scallions but can shorten the Norway Maple branches of about 3/8-inches unevenly along with tearing bark. Regarding Fiskars PowerGear2, its manufacturers Fiskars have said that it can give up to 3.2x power on every cut. The Gardena 8757 Classic Vine Bypass Hand Pruner can cut materials up to the thickness of 20mm and cut the branches dowels of 1/2 inches and buckthorn branches of 3/4 inches. The Tierra Pro 38-1707 7 inches bypass pruning shears can barely cut the buckthorn branches of 3/4 inches and leave the uneven surface with torn barks and cuts.
The Corona BP 3350 Bypass Pruner has an adjustable grip, and it is economical too. Moreover, the replacement blades are also available if you want to buy it. However, you will need to exert more pressure while using your two hands to close it on the buckthorn branches of 3/4 inches and dowels of 1/2 inches. The Corona BP 6310 required more force while cutting scallions. On the contrary, Kenyon Forged Bypass Pruner 41406 is very much decent on slicing raspberries and scallions; however, it requires you to exert more force while cutting live branches and wooden dowels.
You can get AM Leonard 1286 Traditional Bypass Pruners at a slightly lower price than Felco 2. These pruners are very much comfortable as that of ARS HP-VS8Z, and also you can get replacement parts. However, the Fiskars 7936 PowerGear Pruner required more force than any other pruners while cutting raspberries and scallions cut dowels of 1/4 inches unevenly. Still, you can cut the branches of Norway Maple with your one hand only. The ARS HP-VS8R Signature Heavy Duty Rotating Handle Hand Pruner is very resembling the ARS HP-VS8Z featuring the same sharp blades and smooth and perfect function. The EZ Kut Heavy Duty Ratchet Pruner can slice the raspberries canes of about 1/4 inches efficiently and effectively without ratcheting. It can also ratchet through the dowel’s of 1/2 inches and branches of 3/4 inches without any fuss and with little force.
The Gardener’s Friend Ratchet Hand Pruners are the easiest ratcheting pruners for cutting. It can cut branches of 3/4 inches and dowels of 1/2 inches with a little force. The tool also comes with a sponge saturated in mineral oil and embedded in the handle to oil and clean the blades. The lightweight Corona RP 3230 Ratchet Action Anvil Pruner is quite an economical choice and can cut through easily even thick branches. The Flexrake LRB205 Ratchet Anvil can do a mediocre job of slicing scallions. The Gardena 8798-U Smart cut Ratchet Pruner is the most expensive one, but it comes with a specific feature. It has the lever that can switch the pruners from the direct bypass mode to ratchet mode. In the end, the Gardenite Ratchet Pruning Shears are, however, more extensive than any other pruning shears, and you will need to squeeze twice at the end of every snip for engaging it to perform a clean cut.
How have these Pruners been Picked?
Several key points were taken into consideration before preparing the final list of these pruners. Pruners are required to make clean and straight cuts without hurting the hands of users. If any pruner is cutting unevenly, then it can create several problems. Uneven cuts make it difficult for the plants to get healed and expose them to disease and insects, creating the crevices in which water can get collected and increase the chances of rotting and infections. So, we need a pruner that can cut the branches and stems reliably without hurting your hands.
To find out the best gardening pruners, we first consider the quality of its blades. The blades made of high tempered carbon steel or carbon steel last longer. Some companies put chrome coatings or titanium on edges for rust resistance. The second thing that holds importance is the overall design of the pruners. The system should allow the pruners to cut accurately and evenly.
Moreover, it should come down to the middle nut. Also, the screw should control the distance between the blades. If the pruners’ edges rest very tightly against each other, then blades will become unable to do cuttings. Besides, a pruner must fit the user’s grip for smooth opening and closing with one hand. In the end, you can find two types of pruners basically in the market. These two types include anvil pruners and bypass pruners.
Source: The Best Pruners for Gardening
0 notes
CSA Z 662 Reference publications and definitions
June 13, 2020
P.Eng.
Meena Rezkallah
2.1 Reference publications
There is a commentary available for this Clause.
This Standard refers to the following publications, and where such reference is made, it shall be to the edition listed below, unless the user finds it more appropriate to use newer or amended editions of such publications.
CSA Group
A3000-13
Cementitious materials compendium
A3001-13
Cementitious materials for use in concrete
A3002-13
Masonry and mortar cement
B51-14
Boiler, Pressure Vessel, and Pressure Piping Code
B137 Series-13
Thermoplastic pressure piping compendium
B149.1-10
Natural Gas and Propane Installation Code
B149.2-10
Propane Storage and Handling Code
C22.1-15
Canadian Electrical Code, Part I
CAN/CSA-C22.3 No. 4-13
Control of electrochemical corrosion of underground metallic structures
CAN/CSA-C22.3 No. 6-13
Principles and practices of electrical coordination between pipelines and electric supply lines
PLUS 663-04
Land use planning for pipelines: A guideline for local authorities, developers, and pipeline operators
S408-1981-11
Guidelines for the development of limit states design standards
CAN/CSA-S471-04 (withdrawn)
General requirements, design criteria, the environment, and loads
W48-14
Filler metals and allied materials for metal arc welding
W59-13
Welded steel construction (metal arc welding)
W178.2-14
Certification of welding inspectors
Z245.1-14
Steel pipe
Z245.6-06 (R2011)
Coiled aluminum line pipe and accessories
Z245.11-13
Steel fittings
Z245.12-13
Steel flanges
Z245.15-13
Steel valves
Z245.20 Series-14
Plant-applied external coatings for steel pipe
Z245.20-14
Plant-applied external fusion bond epoxy coating for steel pipe
Z245.21-14
Plant-applied external polyethylene coating for steel pipe
Z245.22-14
Plant-applied external polyurethane foam insulation coating for steel pipe
Z245.30-14
Field-applied external coatings for steel pipeline systems
Z246.1-13
Security management for petroleum and natural gas industry systems
Z276-15
Liquefied natural gas (LNG) — Production, storage, and handling
Z341 Series-14
Storage of hydrocarbons in underground formations
CAN/CSA-Z731-03 (R2014)
Emergency preparedness and response
CAN/CSA-ISO 9001-08 (R2014)
Quality management systems — Requirements
CAN/CSA-ISO 31000-10
Risk management — Principles and guidelines
AGA (American Gas Association)
B109.1-2000 (R2008)
Diaphragm-Type Gas Displacement Meters (Under 500 Cubic Feet per Hour Capacity)
(Catalogue # XQ0008)
API (American Petroleum Institute)
5L-2012 (SPEC)
Specification for Line Pipe
5LCP-2006 (R2013) (SPEC)
Coiled Line Pipe
6D-2014 (SPEC)
Specification for Pipeline and Piping Valves
15HR-2001 (R2010) (SPEC)
High Pressure Fiberglass Line Pipe
15LE-2008 (R2013) (SPEC)
Polyethylene (PE) Line Pipe
15S-2006 (R2013) (RP)
Qualification of Spoolable Reinforced Plastic Line Pipe
17J-2014 (SPEC)
Specification for Unbonded Flexible Pipe
17K-2005 (R2010) (SPEC)
Specification for Bonded Flexible Pipe
510-20146 (STD)
Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration
572-2009 (RP)
Inspection Practices for Pressure Vessels
576-2009 (RP)
Inspection of Pressure-relieving Devices
599-2013 (STD)
Metal Plug Valves-Flanged, Threaded and Welding Ends
600-2009 (STD)
Steel Gate Valves-Flanged and Butt-welding Ends, Bolted Bonnets
602-2009 (STD)
Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller for the Petroleum and Natural Gas
Industries
608-2012 (STD)
Metal Ball Valves-Flanged, Threaded and Welding Ends
609-2009 (STD)
Butterfly Valves: Double-flanged, Lug- and Wafer-type
610-2010 (STD)
Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries
617-2002 (R2009) (STD)
Axial and Centrifugal Compressors and Expander-compressors for Petroleum, Chemical and Gas Industry Services
618-2007 (STD)
Reciprocating Compressors for Petroleum, Chemical and Gas Industry Services
650-2013 (STD)
Welded Tanks for Oil Storage
651-2007 (RP)
Cathodic Protection of Aboveground Petroleum Storage Tanks
652-2005 (RP)
Linings of Aboveground Petroleum Storage Tank Bottoms
653-2009 (STD)
Tank Inspection, Repair, Alteration, and Reconstruction
1604-1996 (R2010) (RP)
Closure of Underground Petroleum Storage Tanks
2015-2014 (STD)
Requirements for Safe Entry and Cleaning of Petroleum Storage Tanks
2028-2002 (R2010) (RP)
Flame Arresters in Piping Systems
2350-2012 (STD)
Overfill Protection for Storage Tanks in Petroleum Facilities
2610-2005 (R2010) (STD)
Design, Construction, Operation, Maintenance, and Inspection of Terminal & Tank Facilities
Q1-2013 (SPEC)
Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry
ASME (The American Society of Mechanical Engineers)
B1.1-2003 (R2008)
Unified Inch Screw Threads, (UN and UNR Thread Form)
B1.20.1-2013
Pipe Threads, General Purpose, Inch
B16.1-2010
Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250
B16.5-2013
Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard
B16.9-2012
Factory-Made Wrought Buttwelding Fittings
B16.11-2011
Forged Fittings, Socket-Welding and Threaded
B16.20-2012
Metallic Gaskets for Pipe Flanges: Ring Joint, Spiral Wound, and Jacketed
B16.21-2011
Nonmetallic Flat Gaskets for Pipe Flanges
B16.24-2011
Cast Copper Alloy Pipe Flanges and Flanged Fittings: Classes 150, 300, 600, 900, 1500 and 2500
B16.33-2009
Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 175 psi (Sizes NPS ½ through
NPS2)
B16.34-2013
Valves Flanged, Threaded and Welding End
B16.36-2009
Orifice Flanges
B16.40-2013
Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems
B16.47-2011
Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch Standard
B16.48-2010
Line Blanks
B16.49-2012
Factory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems
B18.2.1-2012
Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag
Screws (Inch Series)
B18.2.2-2010
Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch
Series)
B31G-2012
Manual for Determining the Remaining Strength of Corroded Pipelines
B31.3-2012
Process Piping
B31.8-2012
Gas Transmission and Distribution Piping Systems
B31.8S-2012
Managing System Integrity of Gas Pipelines
B36.19M-2004 (R2010)
Stainless Steel Pipe
Boiler and Pressure Vessel Code, 2013:
Section II: Materials
Section V: Nondestructive Examination
Section VIII: Pressure Vessels — Division 1
Section VIII: Pressure Vessels — Division 2 — Alternative Rules
Section IX: Welding and Brazing Qualifications
PCC-2-2015
Repair of Pressure Equipment and Piping
ASTM International (American Society for Testing and Materials)
A53/A53M-12
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A105/A105M-13
Standard Specification for Carbon Steel Forgings for Piping Applications
A106/A106M-14
Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A126-04 (R2014)
Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A193/A193M-14
Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
A194/A194M-14
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
A216/A216M-14
Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A234/A234M-13e1
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and
High Temperature Service
A268/A268M-10
Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for
General Service
A269-14e1
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A307-12
Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
A320/A320M-14
Standard Specification for Alloy/Steel Bolting Materials for Low-Temperature Service
A333/A333M-13
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other
Applications with Required Notch Toughness
A350/A350M-13
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A352/A352M-06 (2012)
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable
for Low-Temperature Service
A354-11
Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A381-96 (2012)
Standard Specification for Metal-Arc-Welded Steel Pipe for Use with High-Pressure Transmission Systems
A395/A395M-99 (2014)
Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A420/A420M-13
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature
Service
A563/A563M-07
Standard Specification for Carbon and Alloy Steel Nuts
A694/A694M-13
Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts
for High-Pressure Transmission Service
A707/A707M-13
Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A789/A789M-10a
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A860/A860M-13
Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
A984/A984M-03 (withdrawn)
Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
A1005/A1005M-00 (2010)
Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double
Submerged-Arc Welded
A1024/A1024M-02 (2012)
Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
A1037/A1037M-05 (2012)
Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded
B43-14
Standard Specification for Seamless Red Brass Pipe, Standard Sizes
B75/B75M-11
Standard Specification for Seamless Copper Tube
B88-09
Standard Specification for Seamless Copper Water Tube
B241/B241M-12e1
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
B361-08
Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings
D257-14
Standard Test Methods for DC Resistance or Conductance of Insulating Materials
D323-08(2014)
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
D570-98(2010)e1
Standard Test Method for Water Absorption of Plastics
D1000-10
Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic
Applications
D1002-10
Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal
Specimens by Tension Loading (Metal-to-Metal)
D1525-09
Standard Test Method for Vicat Softening Temperature of Plastics
D1653-13
Standard Test Methods for Water Vapor Transmission of Organic Coating Films
D1693-13
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
D2240-05 (2010)
Standard Test Method for Rubber Property — Durometer Hardness
D2290-12
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
D2343-09
Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
D2412-11
Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-
Plate Loading
D2584-11
Standard Test Method for Ignition Loss of Cured Reinforced Resins
D2837-2013 (E2014)
Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or
Pressure Design Basis for Thermoplastic Pipe Products
D2992-12
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber- Reinforced Thermosetting-Resin) Pipe and Fittings
D3261-2012 (E2014)
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
D3350-14
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
D3839-14
Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting- Resin) Pipe
D3895-07
Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
D4060-10
Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
D4541-09e1
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
D5064-07 (2012)
Standard Practice for Conducting a Patch Test to Assess Coating Compatibility
D5084-10
Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using
a Flexible Wall Permeameter
E18-14 rev 4
Standard Test Methods for Rockwell Hardness of Metallic Materials
E21-09
Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
E23-12c
Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
E29-13
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E114-10
Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
E384-11 (E2012)
Standard Test Method for Knoop and Vickers Hardness of Materials
E747-04 (2010)
Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality
Indicators (IQI) Used for Radiology
E1025-11
Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image
Quality Indicators (IQI) Used for Radiology
E1820-13
Standard Test Method for Measurement of Fracture Toughness
E1901-13
Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods
F1290-08 (withdrawn)
Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
F1973-2013 (E2013)
Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide II (PAII) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
F2206-11 (R2014)
Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE)
F2620-13
Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
F2634-10
Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints Using Tensile-
Impact Method
G8-96 (2010)
Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
G9-07(2013)e1
Standard Test Method for Water Penetration into Pipeline Coatings
G10-10
Standard Test Method for Specific Bendability of Pipeline Coatings
G11-04(2012)
Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings
G14-04 (2010)e1
Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
G17-07(2013)
Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
G18-07(2013)
Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
G19-88 (withdrawn)
Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial
G20-10
Standard Test Method for Chemical Resistance of Pipeline Coatings
G21-13
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
G42-11
Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
G55-07 (2013)
Standard Test Method for Evaluating Pipeline Coating Patch Materials
G80-88 (withdrawn)
Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings
G154-12a
Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of
Nonmetallic Materials
UOP163-10
Hydrogen Sulfide and Mercaptan Sulfur in Liquid Hydrocarbons by Potentiometric Titration
AWS (American Welding Society)
A5.32/A5.32M-11
Welding Consumables — Gases and Gas Mixtures for Fusion Welding and Allied Processes
D3.6M-10
Underwater Welding Code
AWWA (American Water Works Association)
C205-12
Cement-Mortar Protective Lining and Coating for Steel Water Pipe — 4 In. (100 mm) and Larger – Shop
Applied
BSI (British Standards Institution)
BS EN 253:2013
District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene
BS EN 489:2009
District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS 7910:2013
Guide to methods for assessing the acceptability of flaws in metallic structures
PD 6493:1991 (withdrawn)
Guidance on methods for assessing the acceptability of flaws in fusion welded structures
CAPP (Canadian Association of Petroleum Producers)
2004-0022
Planning Horizontal Directional Drilling for Pipeline Construction
2009-0009
Best Management Practice — Use of Reinforced Composite Pipe (Non-Metallic Pipelines)
2009-0010
Mitigation of Internal Corrosion in Oilfield Water Pipelines
2009-0011
Mitigation of External Corrosion on Buried Pipeline Systems
2009-0012
Mitigation of Internal Corrosion in Oil Effluent Pipeline Systems
2009-0013
Mitigation of Internal Corrosion in Sour Gas Gathering Systems
2009-0014
Mitigation of Internal Corrosion in Sweet Gas Gathering Systems
CCME (Canadian Council of Ministers of the Environment)
PN 1180
Environmental Guidelines for Controlling Emissions of Volatile Organic Compounds from Aboveground
Storage Tanks
CEPA (Canadian Energy Pipeline Association)
Stress Corrosion Cracking Recommended Practices, 2nd ed. (December 2007)
Facilities Integrity Management Program (FIMP) Recommended Practices, 1st ed. (May 2013)
Development of a Pipeline Surface Loading Screening Process & Assessment of Surface Load Dispersing Methods (Final Report No. 05-44R1) (October 2009)
CGA (Canadian Gas Association)
OCC-1-2013
Recommended Practice for the Control of External Corrosion on Buried or Submerged Metallic Piping Systems
CGA (Common Ground Alliance)
Best Practices, Version 10.0 (March 2012)
CGSB (Canadian General Standards Board)
CAN/CGSB-48.9712-2014/ISO 9712:2012
Non-destructive Testing — Qualification and certification of NDT personnel
DIN (Deutsches Institut für Normung e.V.)
30672-2000
Tape and shrinkable materials for the corrosion protection of buried or underwater pipelines without cathodic protection for use at operating temperatures up to 50 °C
DNV (Det Norske Veritas)
DNV-OS-F101-2013
Submarine Pipeline Systems
DNV-RP-F101-2010
Corroded Pipelines
DNV-RP-J202-2010
Design and Operation of CO2 Pipelines
DOT (US Government, Department of Transportation)
DTRS56-02-D-70036 (2005)
Derivation of Potential Impact Radius Formulae for Vapor Cloud Dispersion Subject to 49 CFR 192
ESI (Electricity Supply Industry)
98-2-1979 (withdrawn)
Ultrasonic Probes: Medium Frequency, Miniature Shear Wave, Angle Probes
Government of USA
US Code of Federal Regulations, Title 33, Chapter I, Part 154, Appendix A, “Guidelines for Detonation
Flame Arresters” (referenced as 33 CFR 154, Appendix A)
US Code of Federal Regulations, Title 49, Part 192, Transportation of Natural and Other Gas by Pipeline:
Minimum Federal Safety Standards (referenced as 49 CFR 192)
IGEM (Institution of Gas Engineers & Managers)
IGEM/TD/1
Steel pipelines and associated installations for high pressure gas transmission, ed. 5
The INGAA Foundation
Guidelines for Parallel Construction of Pipelines, December 2008
ISO (International Organization for Standardization)
2566-1:1984 (R2010)
Steel — Conversion of elongation values — Part 1: Carbon and low alloy steels
3183:2012
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
3898:2013
Bases for design of structures – Names and symbols of physical quantities and generic quantities
5579:2013
Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays —
Basic rules
9080:2012
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of
thermoplastics materials in pipe form by extrapolation
12162:2009
Thermoplastics materials for pipes and fittings for pressure-applications — Classification, designation
and design coefficient
12176-1:2012
Plastic pipes and fittings — Equipment for fusion joining polyethylene systems — Part 1: Butt fusion
12176-2:2008
Plastic pipes and fittings — Equipment for fusion joining polyethylene systems — Part 2: Electrofusion
12176-3:2011
Plastic pipes and fittings — Equipment for fusion joining polyethylene systems — Part 3: Operator’s
badge
12176-4:2003
Plastic pipes and fittings — Equipment for fusion joining polyethylene systems — Part 4: Traceability
coding
13953-2001
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test
pieces from a butt-fused joint
14175:2008
Welding consumables — Gases and gas mixtures for fusion welding and allied processes
14555:14
Welding — Arc stud welding of metallic materials
15156-2:2009
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas
production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
15156-3:2009
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas
production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
15653:2010
Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
16708:2006
Petroleum and natural gas industries — Pipeline transportation systems — Reliability-based limit state
methods
19232-1:2013
Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality
value using wire-type image quality indicators
ISO TR 19480:2005
Polyethylene pipes and fittings for the supply of gaseous fuels or water — Training and assessment of
fusion operators
ISO/TS 24817:2006
Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification
and design, installation, testing and inspection
MSS (Manufacturers Standardization Society)
SP-6-2012
Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
ANSI/MSS-SP-25-2013
Standard Marking System for Valves, Fittings, Flanges and Unions
SP-75-2014
Specification for High-Test, Wrought, Butt Welding Fittings
SP-79-2011
Socket Welding Reducer Inserts (Includes Errata Amended 7/8/2012)
SP-83-2014
Class 3000 Steel Pipe Unions, Socket-Welding and Threaded
SP-95-2014
Swage(d) Nipples and Bull Plugs
SP-97-2012
Integrally Reinforced Forged Branch Outlet Fittings — Socket Welding, Threaded and Buttwelding Ends
NACE International
ANSI/NACE MR0175/ISO 15156-2-2009
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas
production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
Note: Including circular 1-2011 and circular 2-2014.
ANSI/NACE MR0175/ISO 15156-3-2009
Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas
production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
Note: Including circular 1-2011, circular 2-2014, circular 3-2013, circular 4-2014.
SP0285-2011
Corrosion Control of Underground Storage Tank Systems by Cathodic Protection
SP0204-2008
Stress Corrosion Cracking (SCC) Direct Assessment Methodology
SP0206-2008
Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas
SP0502-2008
Pipeline External Corrosion Direct Assessment Methodology
NEB (National Energy Board)
Pipeline Abandonment: A Discussion Paper on Technical and Environmental Issues, November 1996
NEN (Nederlands Normalisatie-instituut)
3650-1:2012 n1
Requirements for pipeline systems – Part 1: General requirements
NFPA (National Fire Protection Association)
10-2013
Standard for Portable Fire Extinguishers
30-2015
Flammable and Combustible Liquids Code
NRCC (National Research Council Canada)
National Building Code of Canada, Chapter 4 of Commentary B, 2015
National Fire Code of Canada, 2010
PEI (Petroleum Equipment Institute)
RP100-11
Recommended Practices for Installation of Underground Liquid Storage Systems
PPI (Plastics Pipe Institute)
TR-3-2012
Policies and Procedures for Developing Hydrostatic Design Basis (HDB), Hydrostatic Design Stresses
(HDS), Pressure Design Basis (PDB), Strength Design Basis (SDB), Minimum Required Strength (MRS)
Ratings and Categorized Required Strength (CRS) for Thermoplastic Piping Materials or Pipe
TR-4-2014
PPI Listing of Hydrostatic Design Basis (HDB), Hydrostatic Design Stress (HDS), Strength Design Basis
(SDB), Pressure Design Basis (PDB) and Minimum Required Strength (MRS) Ratings for Thermoplastic
Piping Materials or Pipe
PRCI (Pipeline Research Council International)
PR-3-805,1989
Modified Criterion for Evaluating the Remaining Strength of Corroded Pipe (RSTRENG)
PR-218-9822, 1999
Guidelines for the Assessment of Dents on Welds
PR-218-9925, 2008
Acceptance Criteria for Mild Ripples in Pipeline Field Bend
PR-227-9424, 2008
Installation of Pipelines by Horizontal Directional Drilling — An Engineering Design Guide
PR-268-9823, 2003
Guidelines for the Seismic Design and Assessment of Natural Gas and Liquid Hydrocarbon Pipelines
Report 194, 1992
Hydrotest Strategies for Gas Transmission Pipelines Based on Ductile-Flaw-Growth Considerations
SSPC (The Society for Protective Coatings)
PA 2-2004
Measurement of Dry Coating Thickness with Magnetic Gages
Transport Canada
621.19-2000
Standards Obstruction Markings Manual
Read More:
CSA Z662-15 (Oil and gas pipeline systems)
TAGS:
CSA Z 662
Engineering Consulting Services
0 notes
Harga Velg Mobil OZ SUPERTURISMO LM ORIGINAL RING 19 Untuk Honda Civic
http://tinyurl.com/yapwajde
Harga Velg Mobil OZ SUPERTURISMO LM ORIGINAL RING 19 Untuk Honda Civic - http://tinyurl.com/yapwajde otomaxpro - Pada kesempatan kali ini, kami akan membahas tentang Harga Velg Mobil OZ SUPERTURISMO LM ORIGINAL RING 19 Untuk Honda Civic. Tapi sebelum kita membahas velg mobil yang satu ini, alangkah lebih baiknya jika kita terlebih dahulu membaca Tips mengganti velg mobil yang akan kami jelaskan di bawah ini. Harga Velg Mobil OZ SUPERTURISMO LM ORIGINAL RING 19 Untuk Honda Civic Mengganti velg mobil merupakan salah satu jenis modifikasi yang umum dilakukan pemilik mobil. Modifikasi tersebut dapat membut mobil seakan memiliki wajah baru dan tampil lebih sporty. Namun mengganti velg bukanlah sekedar memilih motif, ada beberapa faktor penting lain yang perlu diperhitungkan. Layaknya sepatu, jika ukurannya kurang tepat maka akan mengganggu kenyamanan saat digunakan berjalan. Begitu juga dengan mengganti velg, salah perhitungan dapat membuat mobil tersebut tidak nyaman dikemudikan, menjadi boros, merusak kaki-kaki, atau bahkan menyebabkan kecelakaan. Oleh karena itu jika Anda memutuskan mengganti velg standard dengan model aftermarket, jangan terburu nafsu melihat model yang ditawarkan. Perhatikan beberapa faktor penting berikut ini : Spesifikasi Setiap velg mobil memiliki ukuran PCD (Pitch Centre Diameter) yang berbeda. Ukuran PCD velg ditetapkan berdasarkan jarak antara lubang baut yang satu dengan yang lainnya. Ukuran PCD ini dapat dilihat pada spesifikasi yang tertera di velg. Contohnya jika pada velg tertulis 4×100, artinya velg tersebut memiliki 4 lubang baut dengan PCD 100 mm. Berikutnya adalah offset, yaitu ukuran jarak antara bagian dalam tengah velg dengan permukaan mounting (dudukan) velg pada kaki-kaki mobil. Ukuran offset menentukan jarak keluar atau masuknya bibir luar velg dari fender mobil, ini karena dipengaruhi ketebalan lingkaran tengah pada bagian dalam velg yang akan bersinggungan dengan permukaan mounting velg mobil. Semakin kecil nilai offset maka bibir luar velg semakin keluar dari fender, dan sebaliknya semakin besar nilai offset berarti bagian depan velg akan semakin ke dalam fender. Spesifikasi lain yang juga harus diperhitungkan adalah ukuran diameter dan lebar velg, sebab setiap mobil memiliki ukuran velg maksimal. Oleh karena itu jika Anda memutuskan mengganti velg dengan ukuran lebih besar dari sebelumnya, maka sebaiknya peningkatan ukuran velg yang dipilih masih pada kisaran yang dapat ditoleransi, yaitu sebanyak 3 tahap atau dikenal dengan istilah up size +3. Begitu juga dengan lebar velg, sesuaikanlah dengan batas maksimal mobil. Material Velg aftermarket biasanya terbuat dari jenis logam ringan seperti billet steel, forged alloy, atau magnesium bila dibandingkan dengan velg standard yang umumnya terbuat dari material baja. Dengan menggunakan velg yang lebih ringan namun berkualitas, maka bobot keseluruhan mobil dapat berkurang tanpa mengesampingkan daya tahan velg itu sendiri. Dan dengan kaki yang lebih ringan maka beban kerja mesin pun berkurang, yang secara otomatis turut mengurangi konsumsi bahan bakar. Contohnya seperti Enkei, Speedline, TRD, Mugen dan Weld Racing yang tersedia mulai dari ukuran 14 hingga 19 inci dengan harga bervariasi mulai dari Rp 5 jutaan satu set. Model Tak dapat dipungkiri bahwa mengganti model velg dapat merubah tampilan dan meningkatkan keanggunan serta gaya sebuah mobil. Untuk itu sebaiknya disesuaikan dengan kebutuhan dan selera, seperti memilih aliran off road, touring, sporty atau elegance. Saat ini di pasar aftermarket, tersedia berbagai pilihan model velg ada yang berbentuk PALANG atau NGEBLOCK Namun kedua jenis velg tersebut memiliki kelebihan dan kekurangan. Model ngeblock biasanya lebih tahan lama karena modelnya hadir dalam bentuk utuh. Tetapi, model ini biasanya memiliki bobot lebih berat dan memiliki pilihan motif yang terbatas. Sedangkan model palang unggul dalam hal gampang dibersihkannya . selain itu model palang memiliki bobot yang ringan, sehingga dapat mendukung kinerja mesin dan mobil dapat berakselerasi lebih baik. harga velg ring 15 dan 16 kisaran : 3,7 sampai 4,7 , harga velg ring 17 dan 18 kisaran : 4,5 sampai 6,5 , velg ring 19 kisaran 8,5 sampai 9,5 , velg ring 20 dan 22 kisaran harga : 10 sampai 16jt Harga Velg Mobil OZ SUPERTURISMO LM ORIGINAL RING 19 Untuk Honda Civic [youtube https://www.youtube.com/watch?v=96d-Oj2TBaM] Bagi anda yang membutuhkan Daftar Harga velg mobil Vossen. Otomax Car menjual velg mobil dengan harga velg mobil yang murah dengan merk ternama. Seperti Velg Mobil LENSO, Velg Mobil VOSSEN, Velg Mobil WORK, Velg Mobil BRAVE, Velg Mobil RAYS WHEELS, Velg Mobil SSW, Velg Mobil OZ Racing dan lain lain. Bagi yang belum tahu Ukuran Velg Mobil merk tertentu, anda bisa cek di Halaman Daftar Ukuran Velg Mobil Lengkap. Selain Velg Mobil, kamipun menyediakan ban mobil dengan kualitas terbaik dengan brand ternama dan harga ban mobil yang sangat murah. Seperti Ban Mobil Accelera, Ban Mobil Achilles, Ban Mobil Hankook, Ban Mobil Dunlop, Ban Mobil Falken, Ban Mobil Bridgestone dan masih banyak lagi. Bagi yang belum tahu Ukuran Ban Mobil dengan ukuran Velg tertentu, anda bisa cek di Halaman Daftar Ukuran Ban Mobil Lengkap. Untuk pembelian velg mobil dan ban mobil, bisa dengan cash atau cicilan 0% menggunakan kartu kredit. Kapan lagi bisa kredit velg mobil dan ban mobil ? sudah murah bisa kredit lagi. Tidak hanya Menjual Velg Mobil dan Ban Mobil saja, dengan dukungan karyawan Otomax Car yang terlatih dan professional. Kami pun menyediakan Jasa Spooring dan Balancing Ban Mobil Terbaik untuk mobil kesayangan anda. Jadi tunggu apa lagi ? segera miliki velg impian anda dengan harga murah hanya di Otomax. Bagi anda yang berminat, bisa langsung menghubungi kami di : Whatsapp : +6285280808138 Telepon : +6285280808138 Untuk mengetahui Promo dan update produk terbaru kami, anda bisa melihatnya di : Youtube : SINAR OTOMAX Instagram : @otomaxproid Facebook : Sinar Otomax Indonesia Line : OtomaxPro Atau anda bisa langsung mengunjungi toko kami di : Ruko Citra Raya Blok G1/7R Jl. Citra Raya Boulevard Cikupa, Tangerang, Banten 15710 Lokasi : [googlemaps https://www.google.com/maps/embed?pb=!1m14!1m8!1m3!1d15864.823725331507!2d106.52379!3d-6.236565!3m2!1i1024!2i768!4f13.1!3m3!1m2!1s0x0%3A0x3c74844cac6c0a6!2sOtomax+Pro+%7C+Jual+Velg+Mobil%2C+Jual+Ban+Mobil+%26+Aksesoris+Mobil+Terlengkap%2C+Murah%2C+Terbaik!5e0!3m2!1sen!2sid!4v1539694403978&w=600&h=450]
0 notes
New Product Roundup: 2017 GIE+EXPO/HNA
Ariens Co.
Snow Thrower
The Professional 21 single-stage snow thrower is designed for heavy-duty work. It features a spring-loaded scraper bar that self-adjusts and a think paddle that cleans the surface. It has an open engine design and an hour meter to keep maintenance schedules on track.
Atlantic Water Gardens
WaterWall Spillway
The WaterWall Spillway is an enclosed weir that distributes water onto any vertical fascia. Set the WaterWall on top of any masonry or wood-framed wall and plumb it to a pipe hidden inside the wall. With enough clearance between inlet and outlet to handle any fascia up to 2 inches thick, it delivers a smooth, evenly distributed sheet of water across 24 inches of sloped or vertical wall. Set multiple units end to end to create water walls of any width in 2-foot increments.
Avant Techno USA
Avant e5
The Avant e5 is a fully electric, battery-powered fully electric, battery- powered articulated compact loader. The e5 has no emissions, minimal noise level, low operating costs, is battery-powered, comes with an in-machine charging unit, and fits all standard Avant attachments. It has 8 gal/min auxiliary hydraulics flow, which allows working with various attachments.
Belgard
Moduline Series Plank
The Moduline Series Plank paver provides the ultimate flexibility in contemporary paver design and works well for patio, walkway or pool deck installations. Developed to create the ultimate in design versatility, Moduline pavers have a defined and linear 2-millimeter chamfer for a seamless transition from paver to paver that enhances surface smoothness. It is a 14-stone system available in nine colors and four textures. The pavers can be laid in a 24-inch pattern either singularly or with additional sizes in a 3-inch Ashlar format.
Blue Thumb
Marble triple
This marble triple provides a streamlined and elegant addition to the most sophisticated landscape. The clean lines and flow of water over each column create a symphony of soothing sounds. The kit comes with the molded basin and everything you need for professional install. Stand out by offering professional-grade fountains from Blue Thumb.
Bobcat Co.
R-Series excavators
The R-Series excavators from Bobcat feature a dual-flange track roller system. Strengthened hinges and latches, as well as more ridged, aligned panels, reduce vibration in the cab. The excavators also feature blades with increased downward angles for greater stability when digging on an uneven surface or trenching at an angle.
BOSS
Pre-Wet System
The new Pre-Wet System allows contractors to pre-wet solid de-icing materials as they are distributed. The system activates the deicing material to melt through snow and ice faster at low temperatures. It also reduces material bounce for improved material placement and efficiency. Equipped with a 60-gallon tank capacity, the Pre-Wet System is available as an accessory on all new VBX and FORGE spreaders.
BWise
Mulit-Tasker
The Mulit-Tasker dumpster from BWise has a capacity of 18.5 cubic yards to handle worksite trash and debris. Attach the standard flat-bed to transform the system into an equipment delivery platform. A typical 7.6 cubic yard dump bed is also available. The dumpster utilizes a chain drive to power the deck or roll-off on and off the trailer for easy, fast and efficient delivery.
CASE
CX145D SR
CASE Construction Equipment has introduced the all-new CX145D SR minimum-swing radius excavator to its D Series lineup. Designed to provide ample digging and lifting power in a small footprint, the CX145D SR features a compact counterweight and modified boom placement.
County Materials Corporation
Harmony Permeable concrete pavers
Harmony Permeable concrete pavers are designed for stormwater management allowing water to pass through paver joints directly into the ground, reducing flooding, eliminating surface puddling and speeding snow and ice melt. They can maximize land use by replacing traditional retention or detention ponds.
Ditch Witch
SK1550
The Ditch Witch SK1550 is powered by a 44-hp Tier 4 Yanmar diesel engine. The machine directs 34.5 hp to the attachment, allowing it to complete tasks typically suited for traditional skid steer loaders. It offers a 1,558-pound-rated operating capacity to lift heavy loads.
Dur-A-Lift
Urban Forestry Unit
The Urban Forestry Unit is a Class 5 bucket truck with a chipper box that is able to reach up to 50 feet. The compact design and big reach are what make this lift unique. The lighter weight means less damage to yards and property. It will be available with an aluminum chipper box starting in October.
Earth & Turf Products, LLC
100SP
The 100SP Self-Propelled, Walking Topdresser has a capacity of 10 cubic feet. It is powered by a 10.5 hp Briggs & Stratton engine. It features a hydrostatic drive with a fourwheel stance that increases stability on slopes. The topdresser has a 35.5-inch overall width for narrow access paths.
ECHO Inc.
CS-2511T
The CS-2511T top-handle chain saw is gas-powered and lightweight to increase maneuverability. It features an adjustable top-mounted bar oiler which allows for easy-access and prevents the oiler adjustment screw from getting clogged with wood chips and debris. The saw has 12- and 14-inch bar options with the 91PXL chain.
efco
CS-2511T
The new MTT 3600 top handle chain saw from efco has a 2-stroke engine that delivers 35.4cc/2.0 horsepower. Features include an Easy On starting system for quick starts, a nylon air filter for increased air intake efficiency and it is available in bar sizes of 12, 14 and 16 inches.
Firegear Outdoors
Kalea Bay
The Kalea Bay is a new series of outdoor linear fireplaces from Firegear. Each model has two different styles; single-sided or see-through. Opening sizes range from 36 inches to 72 inches. Each model is available for natural or propane gas and must be ordered accordingly.
Grasshopper
900D 1.3L MaxTorque diesel
The new 900D 1.3L MaxTorque diesel mower from Grasshopper is available with choices of either a 61-inch or 72-inch DuraMax deck powered with a splined PTO shaft and features the PowerFold Electric Deck Lift. The Tier 4 Final-compliant 1.3 liter, 3-cylinder, liquid-cooled diesel engine delivers high-torque power while producing fewer emissions than gasoline or propane.
Greenworks Commercial
82-volt line
The 82-volt line has expanded with a new commercial-grade, brushless pole saw. The unit features a 10-inch Oregon bar and chain with side adjust chain tensioning and a three-piece aluminum alloy shaft for 8- or 12-foot reach. Brushless motor offers more torque and longer life, plus the saw has a 27-degree angled head for safer overhead working conditions.
Hearth Products Controls Co.
H-Burner
The CSA Certified H-Burner from HPC can be ordered at 350k BTU in three sizes: 66 by 16 inches, 78 by 16 inches or 90 by 16 inches. H-Burner’s have the versatility to work in indoor gas fire places or outdoor gas fire pit projects. They are constructed of sturdy 304 stainless steel and are used in a vented gas fireplace.
Husqvarna
Husqvarna V500
The new Husqvarna V500 stand-on mowers are set for release in early 2018. The two V500 models will come with zero-turn capability and flip-up standing platform to walk behind the mower if necessary. Available with a 48- or 54-inch ClearCut deck, the V500 models are also equipped with removable deck covers, easy-to-reach transmission by-pass and front-mounted hydro tanks and pumps.
K-Rain
RPS Select rotor
The RPS Select rotor can be used in almost every landscape situation without the need to change nozzles. Four built-in selectable nozzles match arc settings to any degree. The spray pattern and nozzle can be set remotely.
Natural Paving USA
Promenade Flagstone
The Promenade Flagstone is a hand-cut sandstone paver available in calibrated square or rectangular sizes.
Optimas/Pathfinder Systems
T22
The Optimas T22 paver laying machine is the newest, entry-level line of mechanical paver laying equipment. This machine utilizes Optimas’ proven paver clamp attached to an upgraded chassis design. The T-22 is designed to increase speed of installation while reducing labor needs. The machine is just over 2,000 millimeters tall and weighs 1,100 kilograms.
SnowEx
UTV V-plow
The SnowEx UTV V-plow is 6 feet wide and the blade angles to 5 feet wide to fit most sidewalks and through gates. It is constructed of high-strength, low-alloy steel components and reinforced with six vertical ribs for additional stability.
Toro
Precision Series Rotating Nozzle Shrub & Slope Kit
The Precision Series Rotating Nozzle Shrub & Slope Kit from Toro includes a pre-assembled nozzle, shrub riser and check valve. The pre-installed PRN nozzle delivers multiple wind-resistant, low trajectory streams at a matched precipitation rate of 0.6 inches per hour. It also has Toro’s patented X-Flow Technology built into the riser to prevent the flow of water through the riser.
Milwaukee
Ultimate and Low-Profile Backpacks
Constructed with tear-resistant 1680D Ballistic Material and metal zippers for durability, the new Ultimate and Low-Profile Backpacks have vertical attachment straps to mount the backpacks. The reinforced base of the Low-Profile Backpack provides extra protection, and the impact-resistant base on the Ultimate Jobsite Backpack also allows the backpack to stand up on its own.
Warming Trends
CROSSFIRE
The new CROSSFIRE brass burner is patent-pending and creates a taller, brighter, fuller flame with less gas using technology. It has all brass components with a lifetime warranty made in the USA.
Have a new product? Submit entries using our Product Form for Turf, Turf Design Build and PLOW, a supplement to Turf.
The post New Product Roundup: 2017 GIE+EXPO/HNA appeared first on Turf.
from RSSMix.com Mix ID 8230377 http://ift.tt/2hYK6F7
via IFTTT
0 notes
Stainless Steel Casting Machine Tools Component
Stainless steel casting has revolutionized the world of machine tools, providing components with unmatched durability and precision. In the realm of manufacturing, the quality of machine tools directly impacts efficiency and productivity. Let's delve into the realm of stainless steel casting for machine tools and explore why it stands out in the industry.
The Advantages of Stainless Steel Casting
When it comes to crafting machine tool components, stainless steel casting offers a myriad of advantages. The inherent durability and longevity of stainless steel make it an ideal choice for components subjected to high stress and wear. Additionally, its resistance to corrosion ensures a longer lifespan for the machine tools.
Applications of Stainless Steel Casting in Machine Tools
Stainless steel casting finds diverse applications in the production of machine tools. From crafting cutting-edge cutting tools to intricate molds and dies, the versatility of stainless steel enhances the functionality of various machine components. Moreover, it plays a crucial role in constructing stable machine bases and frames.
Quality Assurance in Stainless Steel Casting
Ensuring the quality of stainless steel casting involves meticulous inspection processes, careful material selection, and precision machining. Manufacturers adhere to strict standards to guarantee that each component meets the required specifications, contributing to the overall reliability of the machine tools.
The Role of Stainless Steel in Machine Tool Efficiency
The use of stainless steel in machine tools significantly improves efficiency. Its resistance to wear and tear, even in challenging conditions, means reduced maintenance and downtime. The enhanced performance of machine tools directly translates to increased productivity and cost savings for businesses.
Innovations in Stainless Steel Casting Technology
Recent advancements in stainless steel casting technology have propelled the industry forward. The integration of advanced casting methods and digital technologies allows for more intricate designs and customization. Manufacturers can now meet specific requirements with unprecedented precision.
Economic and Environmental Benefits
Opting for stainless steel casting brings about economic benefits in the long run. While the initial costs may be higher, the longevity and reduced maintenance requirements result in substantial savings over time. Additionally, stainless steel is highly recyclable, contributing to environmentally friendly manufacturing practices.
Challenges in Stainless Steel Casting for Machine Tools
Despite its numerous advantages, stainless steel casting for machine tools comes with its set of challenges. Complex designs may require specialized skills, leading to higher labor costs. The initial investment can also be a barrier for some manufacturers. Overcoming these challenges requires a strategic approach to reap the full benefits of stainless steel casting.
Case Studies: Successful Implementations
Examining real-world examples of industries successfully implementing stainless steel casting in machine tools provides valuable insights. From aerospace to automotive, the positive impact on machine performance and reliability is evident. These case studies serve as testaments to the effectiveness of stainless steel casting.
Choosing the Right Stainless Steel Alloy
Selecting the appropriate stainless steel alloy is crucial for the performance of machine tools. Factors such as the application, environmental conditions, and required durability influence alloy choices. Manufacturers must match the specific requirements of machine components with the suitable stainless steel alloy to ensure optimal performance.
Future Trends in Stainless Steel Casting for Machine Tools
The future of stainless steel casting in machine tools holds exciting possibilities. Integration with smart technologies, a focus on sustainable practices, and evolving industry standards are shaping the trajectory of the industry. Staying abreast of these trends is essential for manufacturers aiming to stay competitive in the market.
Customer Testimonials
Real-world experiences with stainless steel casting provide valuable insights into its impact on machine tools. Customers across various industries attest to the improved efficiency, longevity, and overall performance of machine tools equipped with stainless steel components. These testimonials serve as compelling endorsements for the reliability of stainless steel casting.
Comparative Analysis with Other Materials
To understand the full scope of stainless steel casting, it's essential to compare it with other materials commonly used in machine tools. Analyzing the strengths and weaknesses of stainless steel in comparison to alternatives helps manufacturers make informed decisions about material selection.
Maintenance Tips for Stainless Steel Machine Tools
Proper maintenance is crucial for maximizing the lifespan and performance of machine tools with stainless steel components. Regular cleaning, timely inspections, and effective lubrication practices are key to preventing issues and ensuring smooth operation. Addressing minor issues promptly can prevent major breakdowns and extend the life of the machine tools.
Conclusion
In conclusion, stainless steel casting has emerged as a game-changer in the realm of machine tools. Its unparalleled durability, precision, and resistance to corrosion make it the material of choice for manufacturers aiming for top-notch performance. As industries evolve, the role of stainless steel casting in shaping the future of machine tools is undeniable.
0 notes
R.P Alloys is a self-contained engineering company delivering end-to-end solutions to businesses on a global scale.
Visit:- https://www.rpalloys.com/
1 note
·
View note