#solid state hybrid drive
Text
Maximize Storage Potential: Browse Desktop Hard Drives Collection
Elevate your desktop’s storage capabilities with our diverse range of high-quality desktop hard drives. Find the perfect solution to enhance performance and store your valuable data efficiently. Explore our collection now!
0 notes
Text
GHOSTIN
Miguel O’Hara x Reader
warnings: cursing, hispanics, part 1
word count: 1.1k
summary: sent to a town to finish a report, the ghost he’s living with decides.. maybe he should stay
“Tomorrow?”
“Yes. The last truck is finally ready to move with all the latest equipment needed for this study; it cannot be procrastinated any longer, O’Hara.”
“Ay dios mío.” the scientist ran his fingers through his hair, eyes wide at the news that the “months away” move to a reclusive house in a far away “no-name” town was tomorrow.
This was technically his fault as his reluctance to complete the report on “Gene Growth Combined Experiment 4 (chemical X42): A conclusion on the development of the embryo.” as the full title stated, finally caught up to him.
He had just been busy developing the Spider-Anthropoid’s final stages; an equally important trial study to him, but not so much to Alchemax.
“You have a month at most, I will try to advocate for an extended stay but it’s in your best interest to finish this conclusion report swiftly. Are we clear?”
“Crystal.”
“Wonderful. Now get out of my office O’Hara, the driver will take you to your place and pick you up nice and early tomorrow. Be ready.”
Miguel fought back his taunting remark and left the cold, heartless office.
His work was important. If successful it would create the first human-spider hybrid combination and create an endless amount of possibilities. Ideally to improve the state of the common person, but he wasn’t naive enough to not think it wouldn’t be used for military advances.
“What time tomorrow?”
“9am sharp. Won’t be me though, my friend Gus will he here.” The driver glacéd in the rear view mirror as he pulled up to the window filled penthouse Miguel had the luxury to live in.
“None of my business, sir, but a word from my eavesdropping on the men who I chauffeured earlier.. apparently your new short term living space comes with a rumored “ghost friend”.”
Miguel scoffed, grabbing his coat and laying a few bucks in the drivers’ outstretched hand as he opened the car door, “If it’s none of your business then stay out of it,” he exited the car, “but thanks, chismoso.”
The next morning Miguel snatched the suitcases he packed, shut his blinds and locked his door, making his way to the waiting Taxi.
“Be ‘bout a 20 minute drive to the airport, sir, including traffic.”
He grunted in response, looking out the window as he half listened to the clearly extroverted mans’ essay on his new city’s attractions.
“Yep. But I did hear about that ghost in your house. Good luck with that.”
Miguel’s ears perked up. Ghost? All this talk about this damn ghost was getting him annoyed. Even if there’s such a thing as ther paranormal, he won’t be bothering them and subsequently they don’t have to bother him. Easy.
The yellow cab pulled up to the front of the airport, crowded as usual, and the broad man reluctantly gripped his belongings, giving the world another sigh before preparing himself for a 2 hour flight.
The keys were old, silver, the three individual ones clinging against each other as Miguel pulled them out of the mailbox, a letter falling to the ground.
To Current Renters,
Please note that this property is built on a solid foundation and the doors are properly built into the door frame.
A house is built with consideration to weather events so a very slight creak/sway is expected and not worrying.
It prevents the house from being too stiff and allows for a longer lifespan.
The windows may also be slightly loose within the window frame so feel free to lock them if the draft becomes too much.
No need to report noises either as the walls may run a little thin and animal calls can sound like humans if you are listening through a surface like a wall.
All this to say do not call us to report noises, wind, or creaking in the house.
Sincerely,
(for real.. do not contact us with these issues)
The Owner - Stephen Vincent
He opened the door on his second try, figuring the other keys lead to some kind of garage or safe. The door swung open with a small groan, almost apprehensive with his arrival.
The house itself was comfortable. A glass sliding door across the living space connected to large windows showcasing the beauty forests have to offer; a patio sitting beyond the door.
The kitchen was adorned with dark gray marble tops and a gray and white overall aesthetic for the counters and appliances. It was simple, classy, exactly what his boss thought would allow his mind to stay focused on his task.
Speaking of, the office space had been pre-turned into a small research center complete with the necessary chemicals, equipment, and state of the art technology. If he hadn’t known better he would’ve thought he had a whole mother experiment to conduct while he only needed to draw the conclusions in a consiste report.
That would be left for later, though. He entered what seemed to be his room. Comfortable. A light grey and white with a calming blue pop of color in the decor. Good enough.
Once his luggage had been felt with, he returned to the kitchen to find his fridge already stocked. Perfect.
He began a simple meal of blanco arroz con pollo frito when you saw him. Another one. Only one this time though. He should be easy enough.
You moved closer, getting a better look at this intruder. Immediately you noticed he was handsome, worth a second glance at least. He was toned beyond anyone who had set foot here before, a calm, concentrated expression settling on his face as he seasoned his chicken.
Miguel was dealing with the hot stove, his loungewear on that had just enough coverage to keep him warm when he stopped abruptly, feeling a chill run down his arm.
He dismissed it quickly. It was a new house to him and the air outside cooled drastically at night, a soft draft probably crept in. Big deal.
You decided rather quickly to let him stay for a bit. He was charming, exactly your type if you were honest with yourself which, ofcourse, you’d rather not be when said man barged into your home unannounced.
“You hold my interest,” you peaked at a blue ALCHEMAX security card, seeing the name Miguel O’Hara and the same man that was humming softly as he finished frying his dinner smiling up at you, “I’ll be watching, Miguel O’Hara.”
Thank you for reading! Reposts are extremely appreciated!❣️
A/N: Feel free to send in a request! (taking new ones for a short period of time)
This is part 1 to my new GHOSTIN series! Feel free to comment if you’d like to be added to the tag list!
Like my work? Check out my masterlist!
Also the warnings were a joke (Hispanics)
dont take it up the ahh🥱
#across the spiderverse#spider man: across the spider verse#miguel o'hara x reader#miguel o'hara#miguel o’hara x you#miguel o’hara smut#eventual smut#across the spiderverse smut#miguel o’hara fluff#miguel o’hara x reader#atsv miguel#atsv x reader#atsv#miguel o’hara atsv#atsv fic#miguel o’haras past#roseluxworks#roselux spider verse#fluff#spiderman 2099#spider man across the spiderverse x reader#spidermanverse#spiderverse smut#sony spiderverse#spiderverse x reader#spider man 2099 x you#spider man 2099
256 notes
·
View notes
Text
A newish oc :]
Her name is 0rca
The top is her official ref, feat some concept art i scribbled up after thinking about her design a little
Have abit of summary below of her info
Reblogs are appreciated
Name: 0rca
Age: 34
Species: Hybrid [Disassembly Drone + Transport Drone]
Height: 7 Ft [7 ft in Length as well]
Occupation: None
Gender & Pronouns: Female - She/They
Sexuality: Lesbian
Personality: She is nothing but the worst. 0rca is all aggression and hunger, incapable of feeling any remorse for anything. She will kill, be it infant to elder. She doesn't care. She will not yield. Her stunted emotions keep her from finding a “pod” of her own, her own belief she was the only 'freak' like her ever made. Perhaps she resents herself just as much as she does everything else.
Strengths [At least 4]:
Winter Camouflage: A winter hunter must blend in. 0rca's specific color scheme allows them to blend into her surroundings.
Echolocation: 0rca is capable of seeing shapes and movement based on echolocation, also being able to sense movement under the snow incredibly well due to sensors that litter her body.
Swim Team: She is incredibly skilled at 'swimming' under snow, her body capable of heating itself and moving rapidly enough where even the tightest packed snow is nothing to her. Ice is more tricky, and will take more time to get through, but it's not totally impossible. She is most likely to avoid tougher spaces to avoid spending too much energy
Mimicry: 0rca's tail is similar to that of the upper body of a wounded Worker Drone, The lure often used to lure drones in closer to the water, or close enough for 0rca to get a bite or two.
Weaknesses [At least 4]:
Blind: 0rca is completely blind, and despite her echolocation, she is incapable of seeing anything and must rely on her other senses to hunt.
Fish out of frost: 0rca is capable of surviving above the surface for only a few hours, but is easy to overheat naturally due to so many inner workings. She must be surrounded by constant snow and ice to avoid melting to death. She produces copious amounts of heat, even outside of overheating from hunger.
Slow does not in fact win the race: 0rca is incapable of moving even remotely fast on solid land, only capable of small bursts of speed after leaping out of the snow to pursue prey that isn't close enough. Similar to that of a crocodile.
Disguise Fail: Despite 0rca's tail being similar to that of a worker, the flaws are incredibly noticeable if her prey gets too close before she strikes. This can cause uneasiness, and her meal will often flee, or attack her unarmored underside as a result.
Weapons:
N/A
Backstory:
0rca was created with the sole intent of underwater exploration and enforcement. A subline of Aquatic drones meant to be shipped off to more sea-faring planets as replacements for human divers or submarines. Despite her creators taking great care to handle her creation, she developed with monumental defects, leaving her a more useless test dummy than anything.
0rca's treatment they received wasn't the best, leaving the drone in a very underdeveloped state. The drone slowly becomes more agitated at humankind from the lack of a social life, stuck in a tank forced to swim in circles or float.
She was eventually shut down and abandoned in her creation facility, only coming online years after, escaping into Copper-9's underground systems before emerging onto the surface.
With the planet now frozen over, 0rca had to find other ways to travel and hunt to survive, being severely limited now that her world is much different than before, leaving her no other options than to burrow around in the snowy depths.
Her resentment for anything that moves drives her in her daily life, and what better way to then drag them all into the depths with her.
22 notes
·
View notes
Text
K Reviews and Rants: Miraculous Ladybug Season 5! Episode 11
And now, my fair readers, I shall now embark on PART 2 of the first two-parter of this season! Let's see if it's an improvement...
If there is one thing this episode upsets me the most about, in hindsight, it's how this episode basically embodies the fact that no one in this series has apparently any kind of critical thinking skills. Any kind of ability to reflect on what is going on around them or draw connections just... does not exist, because doing so would cause the flimsy writing to fall apart in seconds, exemplified how Tikki never apparently made the connection between the Alliance Rings tracking the steps of their wielder automatically, Dark(er) Owl going after Socqueline immediately after Marinette ran off to take down the Dinosaur-Pigeon hybrids, or how Monarch was able to find out her and Plagg's new wielders so quickly... or how Alya never once stops to consider the fact that Marinette is still the Guardian, so keeping her identity secret is still a huge deal. It's just not sustainable.
Anyway, rambling over. Onto my mental breakdown! As always, warning for profanity on my part.
Episode 11: Kwamis Choice Part 2 (Deflagration)
Okay, just got started... here's seeing how this goes. And wow, they seriously cannot have people NOT obsess over the love lives of two teenagers for even a second, can they?
Uugghh... this is a small gripe, but them trying to present Alya confidently stating that Ladybug and Chat Noir aren't in love and never have been... to say it IRRITATES ME is an understatement, given how much of an unabashed fangirl she was for the ship, up to and including ignoring Marinette's wishes in posting pics on the topic online.
Okay, we get a scene of Adrien moping over a picture of Marinette on his phone... despite the last episode literally being all about on them FINALLY MAKING FUCKING PROGRESS AND HIM GETTING CONFIRMATION THAT SHE LIKES HIM!! What in the world is he moping about!? It can't be that he's no longer Chat Noir, given that he got over THAT bit of moping at lightning speed. SO WHAT IS HIS PROBLEM!?
Y-You know what makes this entire scene currently going on (Marinette checking in on Alya and congratulating her for being the new Ladybug wielder) so much worse? It's the fact that MARINETTE KNOWS, and also SHE IS STILL THE GUARDIAN OF THE MIRACULOUS. Meaning she is STILL A SERIOUS RISK FOR AKUMATIZATIONS!! Oh, and once again, I'm gonna chime in that, even if she isn't aware that Monarch can listen in on the Alliance Rings, AT MINIMUM Tikki should've let Alya know that they DO track her movements. And the fact that this isn't brought up at all... yeah...
Alya... no. CUT IT OUT WITH THE SHIPPING. You SENT HIM TO HER HOUSE, HIM FORGETTING HIS BAG THERE IS NORMAL, STOP READING SHIT INTO THINGS!!! Dear god, the way they cannot let up for even a second on the LS just drives me insane.
...She told Adrien she was "shaving her socks." They. ARE NOT EVEN TRYING AT THIS POINT.
Alya acting all smug about Marinette and Adrien hanging out (NOT DATING) is honestly infuriating. Because given just how wishy-washy this entire fucking fiasco has been about her respecting and caring about MARINETTE'S OWN FEELINGS, as well as the show's inability to honestly take a fucking SOLID POSITION just makes her come across as a smug "rhymes-with-witch" at the moment.
Alya... YOU KNEW HE WAS OVER THERE BECAUSE YOU FUCKING SENT HIM TO GIVE HER HER HOMEWORK!!!
Dadada... Alya still being unable to grasp and respect Marinette's boundaries, of course.
Ughh... I honestly hate how Alya is referring to Marinette's stupid crush as "episodes." Like, treating a person you actually know, particularly one who is meant to be your BEST FRIEND, as a soap opera for you to watch is incredibly insensitive. And news alert, calling attention to the NON-EXISTENT PLOT PROGRESSION IN YOUR FUCKING SHOW IS NOT FUNNY, IT IS ANNOYING AND JUST SHOWS HOW SHIT THE WRITING IS. Marinette being "back at square one" is not funny. It's pathetic, and honestly unhealthy.
...I honestly just cannot get over how Alya says "you don't have to worry about secret identities or anything about that" when she's conveniently forgetting that MARINETTE IS STILL THE FUCKING GUARDIAN. She is ALWAYS going to have to worry about this stuff, because until she passes on the title (and all relevant memories connected to it), she will ALWAYS be involved in the fight, NO MATTER WHAT. But of course, the show glosses over all that because it doesn't give them the type of drama they want.
Okay, I hate to admit it, but Plagg's face at "Largest cheese cellar in Paris" was honestly funny.
And we get Zoe sneaking around... in her own home. Apparently because of Chloe. Ugghhh... it's gonna be like that, isn't it?
First things out of her mouth being about how "Zoe isn't allowed in the kitchen with her dirty sneakers." And apparently Chloe SOMEHOW gets to dictate where Zoe is allowed to go within the hotel. I'm not even going to pretend to acknowledge this because CHLOE DOES NOT HAVE THE POWER TO MAKE THOSE DECISIONS, and if Andre is ALLOWING THIS then this is just an early look at how much of a fucking pathetic excuse for a father he is.
Also, I don't get why Chloe is calling for Audrey, because it's not as if Audrey would even give a shit, considering that Zoe's literal introduction established that she doesn't give a damn about EITHER Chloe or Zoe, so she isn't gonna give Chloe her way. And if this stupid scene just has the worst Chloe makes Zoe do to "keep her mouth shut" is clean her shoes... okay, what the fuck about this is supposed to justify Plagg running off screaming about Cataclysming Chloe!?
Fucking GOD does this shit annoy me!! Having characters overreact to shit that is, at WORST, annoying and inconvenient pettiness on Chloe's part does not make her worse, it just makes the person DOING said overreacting look petty and stupid! Granted, the one they are having do this is Plagg, whose track record for being "reasonable" isn't very good, but I doubt that thought ever occurred to the writers.
Ughh... and they retconned Plagg accidentally genociding the Dinosaurs as an act of deliberate petty spite. No, this does not make him look cool, it makes him look like a fucking PSYCHO.
Also, Zoe saying "it's pointless" with a smile on her face just gives me the same vibes as Adrien's "She'll never change" comment in Despair Bear. It's treating the actions of someone prone to extreme self-destruction and living in a toxic environment as something to just shake your head over and shrug off... and this is before acting as if Chloe being petty and immature is deserving of regarding her as the Spawn of Satan.
Okay, for this scene alone, I'll GRUDGINGLY give them SOME credit for at least acknowledging that Plagg blows things out of proportion... but that shouldn't be a JOKE, if anything, the fact that the Embodiment of Destruction is prone to overreaction SHOULD BE A VERY BIG PROBLEM!!!
...I just watched Gabriel... putting on a dance number... after coming out of his fucking secret lair. The ONLY fucking reason I'm not screaming at just how completely inappropriate this scene is (in terms of just both undermining any menace within Gabe as a character, but also for writing off his recent discovery as part of a cheap GAG), is because it was over quickly.
AND HERE IS WHERE TIKKI NOT BOTHERING TO MENTION THAT THE ALLIANCE RINGS RECORD A PERSON'S MOVEMENTS COMES BACK TO BITE THEM IN THE ASS!!! FOR THE LOVE OF GOD THIS ONE FUCKING SCENE MAKES THIS ENTIRE GODDAMN FIASCO OF TIKKI AND PLAGG FINDING NEW WIELDERS TOTALLY FUCKING POINTLESS!!!
Oh, now we get a scene of Nathalie sadly staring at a picture of Emilie. No, you don't get to do that since you are fully complicit in ignoring her wishes and have actively continued to go against them, with the only change being that you "aren't on Gabe's side anymore."
Also, the way Gabe phrases it as "the right combination of powers" just makes me bang my head against a wall at how the writers have completely abandoned any pretense of him being able to be genuinely creative in the powers he already grants. The last Akuma didn't even HAVE Unique Powers besides being big and bear-themed.
Again, Nathalie, you DO NOT GET TO GO ON ABOUT HOW SCARED YOU ARE WHEN YOU HAVE BEEN COMPLICIT EVEN WHEN HE MADE AN AKUMA THAT DROWNED THE FUCKING CITY!!!
You also were perfectly willing to make the exact same Wish for yourself, so you have no leg to stand on.
Honestly, him going on about him having discovered the identities of the new Miraculous Holders in Zoe and Alya would be more impressive if his plan wasn't literally the exact same as all his other plans, but copying what he did during Nino's scheme to get Gabe Akumatized and doing it better, which just makes me wonder why the FUCK he didn't add those power ups THEN anyway!? Or at least just used the Ox, given the whole "invulnerability" thing. Heck, the fact that he's had the Ox as far back as Episode Two makes me wonder why he didn't use it to make Chat Noir's Cataclysm Bluff just that, a HARMLESS BLUFF.
And now we get another scene of Nino's fucking stupid resistance. I still cannot take them seriously with those idiotic names.
Next we get a moment of Adrien taking Marinette's hand in his to comfort her... and Adrien, while I appreciate the spirit, and think Marinette wildly flailing is an overreaction, you don't just grab someone's hand like that. That's a violation of her personal boundaries. Ughh... we honestly should've gotten more episodes about stuff like THAT, about how Adrien just doesn't know how to be a normal teen, more than this BS.
...Everything I see of the Resistance just makes me think less of it. Because on the one hand, yes, being able to report Akumatizations is nice... that's why the "Megakuma/Akuma Alerts" exist, and makes Kitty Section writing loud rock music and broadcasting it over the school's speaker system completely pointless, and if anything it isn't going to get any form of the response they are looking for since no one would KNOW that it has anything to do with Akumas, and is more of a distraction from the threat the Akuma represents.
...I do not get why they think they would somehow be able to stop someone from being Akumatized, OR WHY THEY THINK THAT PAINTBALLS WOULD DO ANYTHING TO AN AKUMA!!!
Oh, and another mention of the tired "we would have to lie to each other!!" talking point. Not even gonna pretend to engage with that BS.
Aaaannndd... we get a scene of LITERALLY FUCKING EVERYONE STARING AT ADRIEN AND MARINETTE SHARING A TWO-PERSON TABLE AT LUNCH. This... this is just completely and utterly unhealthy. THE FACT THAT THERE ARE FUCKING FLOWERS ON THE TABLE MAKE IT WORSE, THEY STILL ARE NOT OFFICIALLY DATING YET!!!
I'm just... nothing about this is romantic. If anything, it's creepy because it's overwhelmingly trying to force this scene to be romantic.
...Oh, and we get the first 'Chloe is a dumb blonde' scene with her apparently needing Alliance to define Generous to her. Excuse me while I go out into the snow to scream my head off.
Like, it would be one thing if this was a sarcastic quip she's making that the Alliance Ring just took literally, but we both know it isn't, and I FUCKING HATE IT. Because this is beyond making her stupid, this is literally trying to force her into a specific mold in the most hamfisted way possible.
And another hit, right away, with it apparently being that you HAVE to say "please" to Alliance. There is literally no possible reasoning for including this scene except to point and go "SEE!? SEE!? CHLOE IS AWFUL!! SHE CAN'T EVEN SAY PLEASE!!!"
Oh, she's apparently going to "destroy Dupain-Cheng," where have I heard that before? Never. I have never heard her talk like that prior to Season 4. This... this is just obnoxious.
This also includes the start of the trend of the show making Chloe Lila's attack dog. It's hard to take her as a credible threat when literally it's just Lila using crass manipulation on the girl Astruc insists would be the bottom of the class without help from Sabrina, and she didn't even CARE until Lila brought it up. Nope, I just can't take this seriously, because they are STILL TREATING THE LOVE SQUARE LIKE A FUCKING JOKE.
Yadayadayada, more Chloe Character Assassination and the show not even pretending to have any kind of internal continuity...
Them trying to present Zoe standing up for Marinette as this badass sign is honestly pretty stupid since MARINETTE HAS LEARNED TO STAND UP FOR HERSELF SINCE FUCKING ORIGINS, and no one has EVER taken Chloe seriously as a credible threat. This is just completely and utterly stupid.
...I would laugh at them having Chloe say "I'll crush you all!" if it didn't sound completely and utterly WRONG coming out of her mouth. Her voice IS NOT SUITED TO SAYING GENUINE THREATS. It just makes her sound like she's reading from a cringe-inducing script for a school play.
And now they have Chloe stand-up and just let the Akuma come to her. Not even pretending that this is something DONE to her, and the fact that it's Chloe means that any attempt at trying to make her resist is utterly pointless.
Wow, they didn't even TRY to stop Chloe from being Akumatized. How "totally surprising." So much for "only having one enemy, and that's Monarch."
...And "Sole Destroyer" isn't even something I can take seriously as a threat because of how utterly stupid her power is. She turns people into shoes that "sing her praises" by kicking them.
Also, how is no one hearing Monarch!? Just because he's invisible doesn't mean he's inaudible, and he IS IN THE ROOM WITH ALL OF THEM.
Oh, and we get Plagg shilling for Zoe again...
Also, I just do not get on ANY LEVEL how Monarch not wearing the Miraculouses when he made himself invulnerable would make them... not invulnerable. I just don't. It feels totally arbitrary.
Also, Tikki was ALREADY absorbed into the earrings, how in the world did she get blasted out??
Marinette freaking the hell out really just... undermines any threat that this is supposed to have, it's too out of place right now.
Oh look, Sole Destroyer was somehow defeated off-screen with no explanation. And Monarch gets ambushed by the Resistance, which I still can't take seriously since by all rights this should be entirely in Monarch's favor since, you know, HE HAS VOYAGE!!! Oh, and how in the world did they somehow knock Chloe out!? Did... did this show just FORGET that all the Miraculouses grant their wielders a degree of super strength, toughness, and agility?? Because there is no reason a bunch of kids jumping on top of him should have even slowed Monarch down. And again, VOYAGE.
I don't get why he had to use Multitude before using Voyage at the end, since the fact that he still had a grip on Ladybug's Yo-Yo means he realistically could've just dragged her through with him and had her completely at his mercy.
Tikki and Plagg wondering how Monarch found him out... while ignoring that there is canonically a WAY FOR THEIR WIELDERS TO BE TRACKED IN THE ALLIANCE RINGS!!! Even if they dismiss the idea of Gabriel being Monarch, they should at fucking LEAST be suspicious!!
Once again, I'm not touching the nonsense of Plagg comforting Zoe with a ten-foot-pole, given that it's just tied to the show's Chloe Assassination process. "It was an honor to be your Kwami," PLAGG YOU KNEW HER FOR LESS THEN A FUCKING DAY!!! Okay, and with that, I'm done with this episode.
3 notes
·
View notes
Text
Thrasher Beast
Image © David Gallagher.
[The thrasher beast really reminds me of a fearsome critter, and I wonder if the similarity is intentional. The Fighting Fantasy line is British after all, and fearsome critters are more obscure outside the States (although not unknown; they appear in Borges). In the Fighting Fantasy line, these live in the Arrowhead Islands, which also have whipperwolves, wolves with long tails that they use as weapons. Apparently in this archipelago, mammals have evolved weaponized tails multiple times.]
Thrasher Beast
CR 7 N Magical Beast
This creature looks something like a wolverine the size of a bear, except that its tail is long and muscular, and ends in a solid ball of bone. Its jaw opens too wide, and has dozens of identical sharp teeth.
Thrasher beasts are belligerent carnivores of the lumberwoods. The people who work there have elaborate stories about their parentage—that they are hybrids of a digmaul and a dire wolverine, or are created when a bear cub sleeps inside a dinosaur skeleton. Despite these yarns, they breed true, although infrequently. Thrasher beasts are territorial, and unless spurred by hormones two of these creatures are more likely to fight with each other than to mate.
A thrasher beast does not hesitate to hunt livestock or humanoids. Their trails are often marked by knocked down saplings and broken rocks; a thrasher beast uses its tail to signpost its territory as well as in combat. A creature struck by this tail has the wind knocked out of it, leaving them helpless against the thrasher beast’s claws and teeth. Many natural predators are stronger than a thrasher beast, but few are as pugnacious. Attempts to use magic to calm or frighten these monsters just drive them into an even greater fury.
A thrasher beast stands five feet tall at the shoulders and is about nine feet long. They can live for thirty years, but violence usually fells them before that long.
Thrasher Beast CR 7
XP 3,200
N Large magical beast
Init +5; Senses darkvision 60 ft., low-light vision, Perception +9, scent
Defense
AC 18, touch 10, flat-footed 17 (-1 size, +1 Dex, +8 natural)
hp 97 (13d10+26)
Fort +12, Ref +11, Will +6
Defensive Abilities furious
Offense
Speed 50 ft.
Melee bite +14 (1d8+2), 2 claws +14 (1d6+2), tail slap +12 (2d6+3/19-20 plus daze)
Space 10 ft.; Reach 5 ft.
Special Attacks powerful blows (tail)
Statistics
Str 15, Dex 12, Con 15, Int 2, Wis 14, Cha 7
Base Atk +13; CMB +16; CMD 27 (31 vs. trip)
Feats Diehard, Endurance, Great Fortitude, Improved Critical (tail slap), Improved Initiative, Lighting Reflexes, Multiattack, Skill Focus (Acrobatics)
Skills Acrobatics +11 (+19 when jumping), Climb +13, Perception +13, Stealth +5; Racial Modifiers +4 Climb, +4 Perception
Ecology
Environment temperate and cold hills and forests
Organization solitary or pair
Treasure incidental
Special Abilities
Daze (Ex) A creature struck by a thrasher beast’s tail slap must succeed a DC 18 Fortitude save or be dazed for 1 round. A creature that is struck by a critical hit from the tail slap and fails this save is stunned for 1d3 rounds instead. The save DC is Strength based.
Furious (Ex) Any time a thrasher beast fails a save against an emotion spell or effect, it gains the benefits and penalties of a rage spell instead of the normal effects of the spell.
34 notes
·
View notes
Text
All-In-One Computer Buying Guide
Alright, folks, if you're in the market for a new computer and you're eyeing those sleek, space-saving all-in-one computers, you've come to the right place. We're here to help you make the best choice. So, grab a coffee, get comfy, and let's dive into this all-in-one computer buying guide.
1. Consider Your Space
First things first, think about where you're going to put this beauty. All-in-one computers save space, but they're not one-size-fits-all. Measure your workspace to ensure it'll fit comfortably.
2. Operating System
Like with tablets, you have options: Windows, macOS, and a few others. Choose the one you're most comfortable with and that supports your preferred software.
3. Screen Size and Resolution
Bigger isn't always better, but it depends on what you need. Consider your usage – are you working with spreadsheets, watching movies, or both? Opt for a screen size and resolution that suits your activities.
4. Performance Matters
All-in-ones come with various processor options. If you're into gaming or video editing, you'll want a powerful CPU. For casual use, a mid-range processor will do the job.
5. Memory (RAM)
RAM is your computer's short-term memory. More RAM means better multitasking. If you're a multitasker, aim for 8GB or more.
6. Storage Space
Decide whether you want a traditional hard drive or a faster and quieter solid-state drive (SSD). SSDs are the bomb for speed, but they come at a higher price. You can always opt for a hybrid model with both.
7. Graphics
Are you a gamer or a designer? You'll need a dedicated graphics card. For everyday use, integrated graphics should suffice.
8. Ports and Connectivity
Check the number and types of ports available. USB, HDMI, and SD card slots are handy. Also, make sure it has Wi-Fi and Bluetooth for easy connectivity.
9. Audio and Webcam
If you're into video calls or enjoying good tunes, don't overlook the audio and webcam quality. Crisp sound and a decent webcam make all the difference.
10. Budget
Set a budget and stick to it. All-in-one computers range from budget-friendly to high-end. Don't break the bank if you don't need all the fancy bells and whistles.
11. Read Reviews
Before you click that 'buy' button, read some user and expert reviews. They often reveal the quirks and perks of your potential new computer.
In conclusion, all-in-one computers are fantastic for their space-saving design and sleek looks. With the right research and a clear understanding of your needs, you'll find the perfect all-in-one computer to suit your style and keep you cruising through the digital world. Happy computing!
2 notes
·
View notes
Text
The Ultimate Guide to Buying Budget-Friendly Laptops
Introduction:
In today's fast-paced digital world, owning a reliable and efficient laptop is a necessity for students, professionals, and tech enthusiasts alike. However, with a plethora of options available in the market, finding the perfect budget-friendly laptop can be overwhelming. Fear not! In this comprehensive guide, we will walk you through the essential factors to consider when purchasing a budget-friendly laptop. Whether you're a student on a tight budget or simply looking for a great deal, follow these tips to make an informed decision and find the best laptop that suits your needs and wallet.
Determine Your Needs:
Before diving into the sea of budget-friendly laptops, take a moment to define your requirements. Consider what you'll primarily use the laptop for - studying, web browsing, multimedia, gaming, or work-related tasks. Understanding your needs will help you narrow down the specifications and features required for your ideal laptop.
Set a Realistic Budget:
Budget-friendly laptops come in a range of prices, so it's essential to set a realistic budget based on your affordability. Determine the maximum amount you are willing to spend, but also be open to slight fluctuations, as you might come across excellent deals and discounts.
Check Processor and RAM:
The processor and RAM are vital components that determine the laptop's overall performance. Aim for at least an Intel Core i5 or AMD Ryzen 5 processor and 8GB of RAM. This configuration will ensure smooth multitasking and adequate processing power for everyday tasks.
Storage Options:
Budget-friendly laptops often come with various storage options. Traditional hard drives offer more storage space at a lower cost, while Solid State Drives (SSD) provide faster performance. If speed is a priority, consider opting for a laptop with an SSD or a hybrid storage option.
Display and Graphics:
The display quality and graphics capabilities are crucial, especially if you plan to watch videos, work with multimedia, or indulge in light gaming. Look for a laptop with at least a Full HD (1920x1080) resolution and an integrated or dedicated graphics card.
Battery Life:
Portability is one of the key advantages of owning a laptop, and a good battery life ensures you can use it on the go without constantly searching for a power outlet. Aim for a laptop with at least 6-8 hours of battery life for optimal mobility.
Connectivity and Ports:
Check the laptop's connectivity options and available ports. Ensure it has USB ports, HDMI, audio jack, and any other essential ports you might need for connecting peripherals.
Consider the Brand and Warranty:
Opt for reputable laptop brands known for their quality and after-sales support. Also, check the warranty terms and coverage to ensure your investment is protected.
Read Reviews and Compare:
Before making a final decision, read reviews and compare different models. Look for feedback from users who have purchased the same laptop to get an idea of its real-world performance and reliability.
Conclusion:
Buying a budget-friendly laptop doesn't mean compromising on quality and performance. With careful research and consideration of your needs, you can find a laptop that offers excellent value for your money. Use this ultimate guide to make an informed decision and discover the perfect budget-friendly laptop that fits your lifestyle and requirements. Happy laptop hunting!
#Budget-friendly laptops#Laptop buying guide#Affordable laptops#Laptop specifications#Laptop performance#Laptop display#Laptop graphics#Laptop storage options#Laptop battery life#Laptop connectivity#Laptop brands#Laptop warranty#Laptop reviews#Laptop comparison
4 notes
·
View notes
Photo
07.06.23
Linux Laptop Install 7
The Welcome screen greets you when the system first starts, this is incredibly useful for first time Mint users. The ‘First Steps’ section has a choice of various system wide colours, a light and dark mode, two panel layout choices, system snapshot set-up, driver manager and system updater launcher.
Cinnamon’s file manager is called Nemo.
I went on to personalise my Linux Mint install:
- Changed my theme colour to dark blue. (more themes and colours are available in the ‘Themes’ section in System Settings).
- Changed the desktop background.
- Added a desktop switcher to the panel.
- Downloaded and installed Google Chrome, GIMP, VLC Media Player and Audacity. I got these applications through the Linux Mint Software Manager, apart from Chrome which I installed from the Google website.
- Pinned a number of apps to the panel.
I chose to leave the panel showing rather than auto-hide it.
You can manually adjust the size of the panel and the pinned apps, position the pinned apps on the panel, set the panels position on-screen, add another panel and add applets to the panel as well as the desktop.
I saved some image files that I could preview in XViewer (Mint's Image Viewer) and created a presentation in LibreOffice Impress.
I edited some pictures in the GIMP Image Editor.
I can check the disk space on the laptop by using Baobab, a Linux disk usage tool for analysing storage drives.
This laptop contains a 1 Tera-byte hybrid solid-state hard drive.
3 notes
·
View notes
Text
United States Solid Waste Management Vehicle Market Size, Growth & Trends 2026
Surge in demand of robotic Solid Waste Management Vehicle in the country is driving the growth of United States Solid Waste Management Vehicle Market, in the forecast period.
United States solid waste management vehicle market are anticipated to show a robust growth in the upcoming five years, 2022-2027. The market growth can be attributed to the rising demand of management of solid waste generated in the country. Moreover, the government funded awareness drives and schemes have created enough concerns among the general population about the rapidly degrading environmental health. The concerns are driving the surge in the demand of vehicles that can easily and comfortably transport the waste from each nook and corner of the country to the degradation sites where proper waste management process can be carried out. Daily generation of the solid waste is too high in the country. According to EPA, a common American in a day can produce about 5.5 to 6 pounds of trash. Environmental Protection Agency of United States (US EPA) is the governing body that handles and regulates the solid waste management in all the states. EPA promotes and encourages the processes of solid waste management by source reduction, recycling, composting, landfills, energy recovery from waste, and managing the transfer stations.
According to TechSci report on, “United States Solid Waste Management Vehicle Market By Vehicle Type (Auto Tipper or Hopper Tipper, Garbage Compactor Truck, Dumper Placer, Earth Moving Equipment) By Region, Competition Forecast & Opportunities, 2026”, United States solid waste management vehicle market is anticipated to show a robust growth in the forecast period 2022-2026 with an impressive CAGR on the account of rising demand of better and convenient transportation system of the solid waste management as well as the surge in the demand of the better management of the solid waste that is being produced daily in the country. Moreover, exponential rate of expansion of industrial activities and inappropriate methods of waste management are expected to boost the growth of the United States solid waste management vehicle market in the next five years. Due to rapid population growth and urbanization, the solid waste production has increased therefore authorities have been making stricter rules and regulations regarding the solid waste management and industrial wastes, the process involves a major category of vehicles that transports the garbage from door to door and transports it to the solid waste management factories, which is driving the growth of the United States solid waste management vehicles market in the next five years.
According to the U.S. classification of trucks (class 1 to class 9), refuse collection trucks fall under the class 8 category, which is considered a category for heavy trucks. In the U.S., while heavy trucks contribute merely 4% of total vehicles, they are estimated to be responsible for ~30% of vehicle emission and ~26% of fuel usage. Also, demand of electric and hybrid electric vehicles that may help in the solid waste management is increasing. Mostly for the heavy duty trucks which contributes to the hazardous fuel emission. The electric and hybrid vehicles would have great impact on the emissions with their cleaner economics and outsized impact. Thus, the factor is also inclusive in the list of driving factors of the United States solid waste management vehicle market growth in the upcoming five years.
Browse over XX market data Figures spread through 70 Pages and an in-depth TOC on "United States Solid Waste Management Vehicle Market"
https://www.techsciresearch.com/report/united-states-solid-waste-management-vehicle-market/7506.html
The United States solid waste management vehicle market is segmented by vehicle type, regional distribution and competitional landscape. Based on vehicle type, the market is further bifurcated into auto tipper or hopper tipper, garbage compactor truck, dumper placer, and earth moving equipment. Auto tipper or hopper tipper are anticipated to hold the largest shares of the market and assert its dominance over other type of the solid waste management vehicle market on grounds of the surge in the demand and requirement to collect the garbage from door to door. Auto tippers are a refuse compactor vehicle, that is mounted with solid waste collection equipment. It is often designed for lifting and unloading the garbage from bins, and small collectors. Garbage compactor trucks are a kind of portable compactors. A compactor body is mounted on a truck along with a container. It is designed to be transported by specially designed Hook Loader Unit, which is driven to the dumping ground/processing plant for discharge of compacted garbage. Dumper placer is a truck that is mounted with hydraulically operated arms and lifting mechanism that collects, lifts, transports, tips, etc.
Holding the largest revenue of the market shares, a partial list of the market players includes Waste Management Inc., Republic Services Inc., Waste Connection Inc., Clean Harbors Inc., Covanta Holding Corporation, US Ecology, Inc, Oshkosh Corporation, Dover corporation, New Way manufacturers, Amalgamations Repco Ltd, among others. The market players are actively involved in the development of the technologically advanced composter vehicles such that the transportation and the solid waste management cost can be reduced. Since the government has acute responsibility in the sector, the venturing capital and other financial sustenance is not an issue and supports the further growth of the market in the upcoming five years.
Download Sample Report @ https://www.techsciresearch.com/sample-report.aspx?cid=7506
Customers can also request for 10% free customization on this report.
“Solid waste management vehicles with the technological advancements are capable to automatically lift, and tip over the garbage containers to collect the garbage. More advancements may include features like recycling of garbage and separating the non-recyclable from the recyclable waste. Market players must attenuate themselves with the government policies and governmental norms for the future settlement of the market. Since the waste management companies often have their own trucks and compost vehicles; solid waste management vehicle manufactures must collaborate with the management companies and supply the demands,” said Mr. Karan Chechi, Research Director with TechSci Research, a research based global management consulting firm.
Press release : https://www.techsciresearch.com/news/5963-united-states-solid-waste-management-vehicle-market-to-grow-with-an-impressive-cagr-until-2026.html
“United States Solid Waste Management Vehicle Market By Vehicle Type (Auto Tipper or Hopper Tipper, Garbage Compactor Truck, Dumper Placer, Earth Moving Equipment) By Region, Competition Forecast & Opportunities, 2026” has evaluated the future growth potential of United States solid waste management vehicle market and provides statistics & information on market size, structure and future market growth. The report intends to provide cutting-edge market intelligence and help decision makers take sound investment decisions. Besides, the report also identifies and analyzes the emerging trends along with essential drivers, challenges, and opportunities in United States solid waste management vehicle market.
Contact
Mr. Ken Mathews
708 Third Avenue,
Manhattan, NY,
New York – 10017
Tel: +1-646-360-1656
Email: [email protected]
Web: https://www.techsciresearch.com/
2 notes
·
View notes
Text
Navigating the Ever-Evolving Landscape of Information Technology: A Comprehensive Overview
In today’s fast-paced world, staying updated with the latest trends and advancements in technology is not just advantageous—it's essential. From the inception of cloud computing to the rise of artificial intelligence, the realm of information technology (IT) continues to expand, presenting both challenges and opportunities for individuals and businesses alike. Among the plethora of resources available, one platform stands out as a beacon for tech enthusiasts of all levels: Govindhtech.
With its finger firmly on the pulse of the technews world, Govindhtech has emerged as a go-to destination for those seeking comprehensive coverage of all things tech-related. Whether you're a seasoned professional or a curious beginner, the platform offers insights and analysis on a wide array of topics, ensuring that you remain informed and competitive in today's dynamic IT landscape.
Cloud Computing: The Backbone of Modern Infrastructure
In recent years, cloud computing has revolutionized the way businesses operate, providing scalable and cost-effective solutions for data storage, processing, and application deployment. Govindhtech delves into the intricacies of cloud technology, exploring the latest developments, emerging trends, and best practices for harnessing the power of the cloud. From hybrid cloud setups to serverless architectures, Tech News readers gain valuable insights into optimizing their IT infrastructure for maximum efficiency and performance.
Artificial Intelligence: Shaping the Future of Technology
Artificial intelligence (AI) represents a paradigm shift in how machines interact with and interpret data, leading to unprecedented advancements in various domains, including healthcare, finance, and transportation. Govindhtech offers in-depth coverage of AI, highlighting breakthroughs in machine learning, natural language processing, and computer vision. Whether it's discussing the ethical implications of AI or showcasing real-world applications, the platform serves as a hub for AI enthusiasts seeking to explore the cutting edge of technology.
Computer Hardware: Powering Innovation and Performance
Behind every software application lies a complex ecosystem of computer hardware, from processors and graphics cards to solid-state drives (SSDs) and random access memory (RAM). Govindhtech dives deep into the world of hardware, providing reviews, benchmarks, and analysis to help readers make informed purchasing decisions. Whether you're building a gaming rig or upgrading your workstation, the platform offers valuable insights into the latest CPU architectures, GPU technologies, and storage solutions, Today Tech News ensuring that you stay ahead of the curve in terms of performance and reliability.
Monitors: Enhancing Visual Experiences
In an era dominated by high-resolution displays and immersive multimedia content, the choice of monitor plays a crucial role in shaping the user experience. Govindhtech explores the latest trends in monitor today technology news from ultra-wide curved displays to high-refresh-rate gaming monitors. With detailed reviews and comparisons, readers gain a comprehensive understanding of the features and specifications that matter most, whether they're seeking a professional-grade display for content creation or a gaming monitor for unparalleled responsiveness and clarity.
Staying Ahead in the Tech Race
In the fast-paced world of information technology news, staying ahead of the curve is essential for success. Govindhtech serves as a trusted companion on this journey, offering timely updates, expert analysis, and practical insights to help individuals and businesses navigate the ever-evolving landscape of technology. Whether you're a seasoned IT professional looking to expand your skill set or a novice enthusiast eager to learn, the platform provides the resources and guidance you need to thrive in today's digital age.
In conclusion, Govindhtech stands as a beacon of knowledge and expertise in the world of technology, catering to enthusiasts and professionals alike with its comprehensive coverage of cloud computing, artificial intelligence, computer hardware, and monitors. By staying true to its mission of keeping readers informed and competitive, the platform continues to empower individuals and businesses to embrace the future with confidence and competence.
1 note
·
View note
Text
Shanghai Yongming Electronic Co.,Ltd
Shanghai Yongming Electronic Co., Ltd. is a capacitor manufacturing enterprise integrating design, research and development, production, sales, and service. The company was established in 2004. After almost 20 years of hard work, it has accumulated rich experience in independent research and development and production, trained a group of high-quality technical management teams, and formed a mature capacitor manufacturing process.
Our main products are diversified Aluminum Electrolytic Capacitors, which includes Aluminum Electrolytic Capacitor (Radial Leaded Type, SMD Type, Snap-In Type, and Screw Terminal Type), Conductive Polymer Aluminum Solid Electrolytic Capacitor, Conductive Polymer Hybrid Aluminum Solid Electrolytic Capacitor, MLPC, MLCC and EDLC.
Our product philosophy is:
Ask YMIN for your all capacitor application.
It is precisely because of this sentence that we YMIN constantly seek new partners in difficult situations, and our company’s products are developing faster and faster.We have products that are no inferior to those of our international counterparts, such as mlcc that can compete with murata, laminated capacitors and aluminum electrolytic capacitors that can compete with panasonic and nichicon.
Development History
-2001:
Shangyu Yongming Electronics Co., Ltd. was established in Shangyu, focusing on electrolytic capacitors for lighting power supplies.
-2005:
Renamed shanghai Yongming Electronics Co.Ltd. moved to Fengxian District, Shanghai, andlaunched miniaturized electrolytic capacitorsfor lighting power supplies.
-2008:
We are the first in the industry to introduce adedicated series of LED drive power supplies.
-2010:
We are the frst in the industry to introduce
9mm high-end, full-voltage high-end power
supply products.
-2011:
Our company is the first to promote 600Vultra-high voltage horn type and bolt type
-2012:
We are the frst to introduce a dedicated
series of 7mm high-end, full-voltage high-endpower supplies.
-2013:
We pioneered full-voltage,small-size SMDchip electrolytic capacitors.
-2014:
We are the first to introduce the smaller sizeLKM series and the outdoor power supplyultra-low temperature start-up LKZ series.
-2015:
We are the first to promote the Dc chargingpile series and the LKJ series for smart meters.
-2016:
Miniaturized Cw3s series for Dc charging
piles.
-2017:
Renamed as Shanghai yongming ElectronicsCo. Ltd.. it launched thin,full-voltage, 5mmhigh-SMD SMD SMD VMM series, a full range ofsolid-state products, high-voltage for fastcharging sources, and ultra-small kc series.
-2018:
Large-capacity thin solid capacitor VPs serieslow-ESR large-capacity miniaturized NPG
series, ultra-small diameter NPM series, solid-liquid hybrid capacitor.
-2019:
Laminated polymer solid capacitor, super
capacitor,ultra-small size,low impedanceliquid chip V3W series. 135°c hiah temperature
resistant liquid chip VKL(R)series.
-2020:
Lithium-ion secondary battery, high voltagehigh Q MLCC,3.95mmL liquid/solid state chipaluminum electrolytic capacitor.
-2021:
Launched supercapacitor business unit modules (horn type, lead type)
-2022:
Construction of the third phase of the factory started, adding 28,000 square meters of production area
Laminated products launch ESR 3mΩ
-2023：
Launched new product line of conductive polymer tantalum electrolytic capacitors
Liquid launches high capacity density products (KCM) suitable for gallium nitride
Business unit introduction
The Liquid Miniature Business Division has been involved in R&D and manufacturing since 2001. It has an experienced R&D and manufacturing team and continues to steadily produce a variety of high-quality miniaturized capacitors to meet customers’ innovative needs for capacitors. The Liquid Small Business Division has two types of packages: liquid chip aluminum electrolytic capacitors and liquid lead aluminum electrolytic capacitors. Its products have the advantages of miniaturization, high stability, high capacity, high voltage, high temperature resistance, low impedance, high ripple, and long life. It is widely used in new energy automotive electronics, high-power power supplies, smart lighting, gallium nitride fast charging, home appliances, photovoltaics and other industries.
The Liquid Large Business Division was established in 2009 and focuses on the R&D and manufacturing of horn-type and bolt-type aluminum electrolytic capacitors. Liquid large-scale aluminum electrolytic capacitors have the advantages of ultra-high voltage (16V~630V), ultra-low temperature, high stability, low leakage current, resistance to large ripple current, and long life. The products are widely used in photovoltaic inverters, charging piles, vehicle-mounted OBC, and outdoor Energy storage power supply, industrial frequency conversion and other application fields. We give full play to the advantages of “a professional team that integrates new product development, high-precision manufacturing, and application promotion”, and towards the goal of “let there be no difficult container for charging”, we are committed to satisfying the market with technological innovation and combining different applications of customers demand, carry out technology docking and manufacturing connection, provide customers with technical services and special product customization to meet customer needs.
The solid-solid-liquid mixing division was established in 2017. Relying on the technology and talents of Japanese brands, it focuses on new product development, high-precision manufacturing and application promotion. Through investment in domestic advanced manufacturing equipment and continuous technological upgrades and breakthroughs, A product technology system with core competitiveness has been formed. Now it has established two product lines: solid aluminum electrolytic capacitors and solid-liquid hybrid aluminum electrolytic capacitors. The products comply with multiple certifications such as AEC-Q200 and IATF16949. Among them, solid aluminum electrolytic capacitors have the advantages of miniaturization, large capacity, ultra-low ESR, low leakage, and high current impact resistance. The products are mainly used in gallium nitride PD fast charging, industrial control, artificial intelligence, IDC servers, military industry and other industries; Solid-liquid hybrid aluminum electrolytic capacitors have the advantages of high reliability, wide temperature stability, wide frequency stability, ultra-low ESR, earthquake resistance, and high current impact resistance. The products are mainly used in the new energy automotive electronics industry. The two major product lines have won the trust and high praise of many well-known domestic and foreign brand manufacturers for their reliable product quality and excellent product characteristics.
The Supercapacitor Division was established in 2017. It has gathered a professional team integrating new product development, high-precision manufacturing, and application promotion. It has made every effort to introduce high-quality foreign materials and process technologies, forming a highly matched product technology system. Now we have a comprehensive range of domestic and foreign supercapacitors: such as cylindrical lead type, horn type, button type, module type, SMD chip type, 3.8V lithium ion capacitor, etc. The products comply with State Grid certification, AEC-Q200, IATF16949, etc. With multiple certifications, it is widely used in industries such as smart three-meter (electricity meter, water meter, gas meter), automotive electronics (ETC, driving recorder), new energy (wind pitch, photovoltaic), military industry (tank emergency starting power supply), etc. With the rapid development of 5G technology and the intelligent Internet of Things market, the products of the Supercapacitor Division will continue to inject development momentum into smart life and bring users a better experience.
The solid-state laminated business unit has been involved in research and development since 2018 and started mass production in March 2020. It currently has a monthly production capacity of 6 million units. The laminated polymer solid aluminum electrolytic capacitor has the advantages of high voltage, large capacity, thin profile, ultra-low impedance, and resistance to large ripple current. Its ultra-low ESR and powerful filtering ability are cutting-edge achievements in the field of aluminum electrolytic capacitors and are used in Communications, military industry, Internet of Things, IDC servers, artificial intelligence and other terminals.
Since its establishment in 2019, the MLCC Division has always been committed to the research and development, manufacturing and application promotion of high-voltage MLCCs, fully benchmarking against Taiwanese and Japanese high-end products and technologies. Now it has X7R, NPO and other product series, with voltages from 1KV to 3KV, all of which are large-sized high-voltage products above 1206. They are widely used in adapters, switching power supplies, high-voltage power supplies, lighting devices and other products.
The Polymer Polymer Tantalum Capacitor Division was established in 2022. Compared with its peers, Yongming polymer tantalum capacitors have higher capacity, lower ESR and higher withstand voltage. Products are widely used in digital servers, PCs, ultra-thin chargers, automotive electronics, communications industries, base stations, switches, industrial power modules, military power supplies and other fields. Yongming polymer tantalum capacitors replace imported tantalum capacitors, which has broad prospects and is worth cultivating.
● Support the innovation and upgrading of customer products.
● Ensure the stable operation of customer products.
● Eliminate hidden dangers in the use of customer products.
● Guarantee the user experience of customer products.
Ask YMIN for your capacitor solutions.
Website:https://www.ymin.cn/
E-mail: [email protected]
#manufacturer#electronic#capacitors#electrolytic capacitors#electric vehicles#electric cars#automotive components#electronic components#factory#energy storage#energy
0 notes
Text
Host Bus Adapters: The Bridge Between Servers and Storage
Host Bus Adapters (HBAs) are crucial components in server infrastructure, serving as the communication bridge between servers and storage devices. They facilitate data transfer, protocol conversion, and data protection, ensuring seamless and reliable data access for critical applications. HBAs come in various configurations and technologies to cater to diverse storage needs and server environments.
0 notes
Text
Which Battery is Used in Electric Vehicles?
Electric vehicles (EVs) are revolutionizing the automotive industry with their eco-friendly and energy-efficient design. Central to the operation of EVs are the batteries that power them. Let's explore the different types of batteries used in electric vehicles and their impact on the future of transportation.
Introduction to Electric Vehicles (EVs)
EVs are vehicles powered by electric motors rather than internal combustion engines. They rely on rechargeable batteries to store and supply energy, making them environmentally friendly alternatives to traditional fossil fuel vehicles.
Importance of Batteries in EVs
Batteries are the heart of an electric vehicle, providing the energy required for propulsion and auxiliary systems. The choice of battery type directly influences factors such as range, charging time, performance, and overall cost of ownership.
Types of Batteries Used in Electric Vehicles
Lithium-Ion Batteries
Lithium-ion (Li-ion) batteries are the most commonly used in modern electric vehicles due to their high energy density, fast charging capabilities, and relatively long lifespan. They offer excellent performance and are suitable for various EV applications.
Lead-Acid Batteries
Lead-acid batteries, although less common in EVs today, were among the earliest types used. They are known for their affordability but have limitations in terms of energy density and weight, making them less efficient for long-range electric vehicles.
Nickel-Metal Hydride (NiMH) Batteries
NiMH batteries were prevalent in hybrid electric vehicles (HEVs) before the widespread adoption of lithium-ion technology. They offer decent energy density and are environmentally friendlier than lead-acid batteries but are gradually being phased out in favor of Li-ion batteries.
Solid-State Batteries
Solid-state batteries represent the next frontier in EV battery technology. They use solid electrolytes instead of liquid, offering potential advantages such as higher energy density, faster charging, and improved safety. However, commercial-scale production and cost considerations remain challenges.
Advantages and Disadvantages of Each Battery Type
Each battery type has its strengths and limitations. Li-ion batteries excel in energy density and performance but can be costly. Lead-acid batteries are affordable but have lower energy density. NiMH batteries strike a balance between cost and performance, while solid-state batteries hold promise for the future but are still in development stages.
Innovations and Trends in EV Battery Technology
The EV battery industry is constantly evolving, with ongoing research focused on enhancing energy storage capacity, reducing charging times, improving durability, and lowering costs. Innovations such as silicon-anode batteries, solid-state electrolytes, and recycling initiatives are shaping the future of EV batteries.
Environmental Impact and Sustainability of EV Batteries
While EVs offer environmental benefits by reducing carbon emissions, the production and disposal of batteries raise concerns about resource depletion and waste management. Efforts are underway to promote battery recycling, develop sustainable materials, and minimize the ecological footprint of EVs.
Conclusion
The choice of battery in electric vehicles significantly impacts their performance, efficiency, and environmental footprint. As technology advances and market demand grows, continued innovation and sustainability practices will drive the evolution of EV batteries.
0 notes
Text
Microtech Inductions - India's Best Induction Brazing, Annealing, Heating, Melting machine manufacturers and suppliers.
INTRODUCTION
MICROTECH INDUCTIONS PVT. LTD. stands out as a leader in the design and production of advanced Solid State Inverter Technology-based Induction machines catering to a wide range of applications including Heating, Melting, Annealing, Hardening, Brazing, Cap Sealing, and Shrink Fitting.
With over 1000 successful Induction Machines in operation worldwide, MICROTECH has achieved several notable industries first such as:
First to introduce Utensil Annealing Machine in Steel Industry.
First to introduce double frequency inverter in Melting with efficiency as high as 95%.
First to introduce hybrid control strategy for induction power control (patent pending).
First to introduce multi-stacking of voltage source inverter for capacity enhancement (Patent pending).
The company also boasts a state-of-the-art Setup, Testing, and Manufacturing facility dedicated to ensuring adherence to quality standards in line with ISO and CE guidelines.
Brazing Excellence
Microtech Inductions' induction brazing machines are renowned for their precision and consistency. Whether it's joining intricate components in the automotive industry or creating strong bonds in the aerospace sector, their brazing machines deliver exceptional results every time
Annealing Solutions
For heat treatment processes such as annealing, MicrotechInductions offers specialized machines that provide uniform heating and controlled cooling, ensuring optimal material properties. This is crucial for industries like metallurgy, where precise annealing processes are essential.
Heating Capabilities
In applications requiring rapid and localized heating, Microtech Inductions' induction heating machines excel. From forging to hardening, their machines provide fast, efficient, and energy-saving heating solutions, enhancing productivity and reducing operational costs.
Melting Expertise
Induction melting is another area where Microtech Inductions shines. Their melting machines offer precise temperature control and unmatched purity, making them ideal for industries like foundries, where high-quality molten metal is critical for production processes.
CONCLUSION
In conclusion, MICROTECH INDUCTIONS is well-equipped to tackle any challenge that comes its way by a dynamic and forward-thinking management and Business Administration team. As one of the leading manufacturers and suppliers of Induction Brazing ,Heating, Melting, and Annealing machines, MICROTECH continues to drive innovation and excellence in the industry.
0 notes
Text
3D Printed Batteries Market is Dazzling Worldwide and Forecast to 2030 | GQ Research
The 3D Printed Batteries market is set to witness remarkable growth, as indicated by recent market analysis conducted by GQ Research. In 2023, the global 3D Printed Batteries market showcased a significant presence, boasting a valuation of USD 120.50 Million. This underscores the substantial demand for 3D Printed Batteries technology and its widespread adoption across various industries.
Get Sample of this Report at: https://gqresearch.com/request-sample/global-3d-printed-batteries-market/
Projected Growth: Projections suggest that the 3D Printed Batteries market will continue its upward trajectory, with a projected value of USD 201.18 Million by 2030. This growth is expected to be driven by technological advancements, increasing consumer demand, and expanding application areas.
Compound Annual Growth Rate (CAGR): The forecast period anticipates a Compound Annual Growth Rate (CAGR) of 23.85 %, reflecting a steady and robust growth rate for the 3D Printed Batteries market over the coming years.
Technology Adoption:
The adoption of 3D printed batteries represents a significant leap forward in energy storage technology, offering unparalleled flexibility, customization, and efficiency. With the ability to fabricate intricate battery designs layer by layer, 3D printing revolutionizes the production process, enabling the creation of batteries with complex geometries and tailored properties. This technology finds applications across various industries, including electronics, automotive, aerospace, and renewable energy, where the demand for compact, lightweight, and high-performance energy storage solutions is paramount.
Application Diversity:
The application diversity of 3D printed batteries spans a wide range of industries and use cases, driven by the unique capabilities of additive manufacturing technology. In the electronics sector, 3D printed batteries power portable devices, wearable gadgets, and IoT sensors, providing compact and lightweight energy sources for mobile applications. In the automotive industry, these batteries support electric vehicles (EVs) and hybrid vehicles, offering improved energy density, faster charging times, and enhanced safety features. Additionally, 3D printed batteries find applications in aerospace, where lightweight and high-performance energy storage solutions are critical for space exploration and satellite missions, as well as in renewable energy systems, grid storage, and medical devices, among others.
Consumer Preferences:
Consumer preferences in the 3D printed batteries market are shaped by factors such as energy density, power output, reliability, and cost-effectiveness. End-users seek batteries that offer long-lasting performance, rapid charging capabilities, and compatibility with a wide range of devices and applications. Customization options, such as the ability to tailor battery designs to specific requirements and form factors, are also valued, allowing consumers to optimize energy storage solutions for their individual needs. Moreover, considerations related to sustainability and environmental impact play an increasingly important role in consumer decision-making, driving demand for eco-friendly battery materials and manufacturing processes.
Technological Advancements:
Technological advancements drive innovation and differentiation within the 3D printed batteries market, enabling manufacturers to develop batteries with improved performance, efficiency, and reliability. Ongoing research and development efforts focus on optimizing battery chemistries, electrode designs, and printing techniques to enhance energy density, cycle life, and safety features. Advanced materials, such as solid-state electrolytes and nanostructured electrodes, enable the fabrication of batteries with higher energy densities and faster charge/discharge rates. Furthermore, advancements in 3D printing technology, including multi-material printing, high-resolution printing, and process automation, enable the production of complex battery architectures with precise control over material composition and microstructure.
Market Competition:
The 3D printed batteries market is characterized by intense competition among established players and emerging startups, driving continuous innovation and market expansion. Established battery manufacturers, as well as companies specializing in additive manufacturing and materials science, vie for market share through the development of proprietary technologies, strategic partnerships, and product differentiation strategies. Additionally, the market landscape is influenced by factors such as intellectual property rights, regulatory compliance, and global supply chain dynamics, which impact the competitive positioning of companies across different regions and industry sectors.
Environmental Considerations:
Environmental considerations are increasingly shaping the 3D printed batteries market, with a growing emphasis on sustainability, circular economy principles, and resource efficiency. Manufacturers strive to minimize the environmental footprint of battery production processes by adopting eco-friendly materials, reducing waste generation, and optimizing energy consumption. Additionally, efforts are underway to develop recycling and end-of-life management strategies for 3D printed batteries, ensuring that valuable materials are recovered and reused in future manufacturing cycles. By embracing environmental responsibility, stakeholders in the 3D printed batteries market contribute to a more sustainable and resilient energy storage ecosystem, meeting the evolving needs of consumers and regulatory requirements..
Regional Dynamics: Different regions may exhibit varying growth rates and adoption patterns influenced by factors such as consumer preferences, technological infrastructure and regulatory frameworks.
Key players in the industry include:
Sakuu Corporation
Neware Technology LLC
Stratasys Ltd
Materialize NV
3D Systems
EOS GmbH
GE Additive
EXOne
Voxeljet
Envision Tec
The research report provides a comprehensive analysis of the 3D Printed Batteries market, offering insights into current trends, market dynamics and future prospects. It explores key factors driving growth, challenges faced by the industry, and potential opportunities for market players.
For more information and to access a complimentary sample report, visit Link to Sample Report: https://gqresearch.com/request-sample/global-3d-printed-batteries-market/
About GQ Research:
GQ Research is a company that is creating cutting edge, futuristic and informative reports in many different areas. Some of the most common areas where we generate reports are industry reports, country reports, company reports and everything in between.
Contact:
Jessica Joyal
+1 (614) 602 2897 | +919284395731 Website - https://gqresearch.com/
0 notes
Text
Reducing Carbon Footprint with Peter Gregory Striker: Innovations in Eco-Friendly Automotive Technologies
As concerns about climate change and environmental sustainability continue to rise, the automotive industry is undergoing a transformative shift towards eco-friendly technologies aimed at reducing carbon emissions and minimizing environmental impact. From electric vehicles (EVs) to hybrid powertrains and fuel-efficient innovations, automakers are investing heavily in research and development to create vehicles that are both environmentally sustainable and economically viable. In this blog, we delve into the latest trends and innovations in eco-friendly automotive technologies, exploring how these advancements are driving the industry towards a greener and more sustainable future.
Peter Gregory Striker
Electric Vehicles (EVs) and Battery Technology
One of the most significant trends in the automotive industry is the rapid adoption of electric vehicles (EVs) powered by advanced battery technology. EVs offer a zero-emission alternative to traditional internal combustion engine vehicles, reducing greenhouse gas emissions and air pollution. Recent advancements in battery technology, such as lithium-ion batteries with higher energy density and faster charging capabilities, have made EVs more practical and accessible to consumers. Additionally, the growing availability of charging infrastructure and government incentives for EV adoption are further driving the transition towards electric mobility.
Moreover, automakers are investing in the development of next-generation batteries, such as solid-state batteries, which promise even greater energy density, faster charging times, and improved safety. These advancements are expected to address key challenges associated with EVs, such as limited range and long charging times, making electric mobility a more viable option for mainstream consumers. As battery technology continues to evolve, the adoption of EVs is poised to accelerate, leading to significant reductions in carbon emissions and dependence on fossil fuels in the transportation sector.
Hybrid Powertrains and Fuel-Efficient Technologies
In addition to EVs, automakers are also exploring hybrid powertrains and fuel-efficient technologies as part of their efforts to reduce carbon footprint and improve fuel economy. Hybrid vehicles combine traditional internal combustion engines with electric motors, allowing for greater fuel efficiency and reduced emissions compared to conventional vehicles. By seamlessly switching between electric and gasoline power, hybrid vehicles can optimize fuel consumption and minimize environmental impact during both city driving and highway cruising.
Furthermore, advancements in fuel-efficient technologies, such as turbocharging, direct injection, and variable valve timing, are improving the efficiency of internal combustion engines and reducing carbon emissions. These technologies enable engines to achieve higher levels of power and performance while consuming less fuel and emitting fewer pollutants. Additionally, the use of lightweight materials and aerodynamic designs in vehicle manufacturing further enhances fuel efficiency and reduces carbon footprint. By incorporating hybrid powertrains and fuel-efficient technologies into their vehicle lineup as highlighted by experts like Peter Gregory Striker, automakers are providing consumers with environmentally sustainable options that prioritize both performance and eco-friendliness.
Sustainable Materials and Manufacturing Processes
Another emerging trend in the automotive industry is the adoption of sustainable materials and manufacturing processes to reduce environmental impact throughout the vehicle lifecycle. Automakers are increasingly using recycled or renewable materials, such as recycled plastics, natural fibers, and bio-based composites, in vehicle interiors, exteriors, and components. By incorporating sustainable materials into vehicle design and production as emphasized by experts like Peter Gregory Striker, automakers can reduce the consumption of natural resources, minimize waste, and lower carbon emissions associated with manufacturing.
Moreover, automakers are investing in energy-efficient manufacturing processes, such as robotic automation, 3D printing, and water-based paint systems, to reduce energy consumption and emissions in their production facilities. These advancements not only improve environmental sustainability but also enhance production efficiency and reduce costs. Additionally, the adoption of circular economy principles, such as remanufacturing and recycling of vehicle components, further reduces the environmental footprint of the automotive industry by extending the lifecycle of materials and minimizing waste.
Connected and Autonomous Vehicles (CAVs)
The rise of connected and autonomous vehicles (CAVs) is also contributing to efforts to reduce carbon footprint and improve environmental sustainability in the automotive industry. CAVs leverage advanced sensors, artificial intelligence, and vehicle-to-everything (V2X) communication technology to optimize driving routes, reduce traffic congestion, and minimize fuel consumption. By enabling vehicles to communicate with each other and with infrastructure as highlighted by experts like Peter Gregory Striker, CAVs can enhance traffic flow, reduce idling time, and optimize energy efficiency.
Furthermore, CAVs offer potential benefits in terms of ride-sharing and mobility-as-a-service (MaaS) models, which can reduce the number of vehicles on the road and lower overall carbon emissions associated with transportation. By providing convenient and efficient alternatives to private car ownership, CAVs can encourage modal shifts towards more sustainable modes of transportation, such as public transit, biking, and walking. Additionally, the electrification of autonomous vehicle fleets further reduces carbon emissions and air pollution, particularly in urban areas where air quality is a major concern.
Infrastructure Investments and Policy Support
In addition to technological advancements, infrastructure investments and policy support are essential for accelerating the transition to eco-friendly automotive technologies and reducing carbon footprint. Governments, industry stakeholders, and environmental organizations are collaborating to expand charging infrastructure for electric vehicles, improve public transportation networks, and incentivize the adoption of clean energy vehicles through subsidies, tax incentives, and emissions regulations.
Moreover, policymakers are implementing stricter fuel economy standards and emission regulations to encourage automakers to develop more fuel-efficient and low-emission vehicles. By setting ambitious targets for carbon reduction and promoting the adoption of eco-friendly technologies as emphasized by experts like Peter Gregory Striker, governments can drive innovation and investment in sustainable transportation solutions. Additionally, public awareness campaigns and consumer education initiatives play a crucial role in promoting eco-friendly driving habits and encouraging individuals to make environmentally conscious choices when purchasing vehicles.
Towards a Greener Automotive Future
The automotive industry is undergoing a profound transformation towards eco-friendly technologies aimed at reducing carbon footprint and mitigating the impacts of climate change. From electric vehicles and hybrid powertrains to sustainable materials and connected autonomous vehicles, automakers are embracing innovative solutions to create vehicles that are more environmentally sustainable and energy-efficient.
By investing in research and development, infrastructure improvements, and policy support as highlighted by experts like Peter Gregory Striker, stakeholders across the automotive ecosystem are driving the transition towards a greener and more sustainable automotive future. As consumer demand for eco-friendly vehicles continues to grow and technological advancements accelerate, the automotive industry is poised to play a pivotal role in shaping a more sustainable and resilient transportation system for future generations.
0 notes
Last Seen Blogs
