#fiber engineering near USA | Explore Tumblr Posts and Blogs

itcars · 3 years

Photo

First Look: The Aston Martin Valkyrie Spider

The new Valkyrie Spider, unveiled today at Pebble Beach Concours d’Elegance, is a thrilling next-step in the progression of the Aston Martin Valkyrie bloodline. It promises an even more intense experience. One shaped by the unbeatable sensory stimulus that comes with roof-off driving in one of the world’s most extreme hypercars. One that delivers the most comparable experience to that of an F1 car, not limited to the track.

The pursuit of open-top luxury comes with the challenge of ensuring the core experience remains true to Aston Martin and Adrian Newey’s exacting performance objectives for the original Aston Martin Valkyrie program. As these positioned Valkyrie at the very cutting-edge of hypercar design and engineering it means the Valkyire Spider has benefitted from unique engineering solutions born from the combined talents of Aston Martin and Red Bull Advanced Technologies (RBAT).

While the Valkyrie’s unique 1155PS hybrid V12 powertrain remains unchanged, the Spider has received revisions to its carbon fiber structure, plus recalibration of both the active aerodynamic and active chassis systems. All with an eye to maintaining optimal Valkyrie performance when driven in a roof-off condition.

Key to Valkyrie Spider’s unprecedented performance is the ultra-lightweight construction and high downforce aerodynamics package. The upper body surfaces of the teardrop-shaped cockpit and lower tub contours follow the envelope of space available between the huge full-length Venturi tunnels that run either side of the cockpit floor. Drawing huge quantities of air beneath the car to feed the rear diffuser, these tunnels are the key to generating Aston Martin Valkyrie Spider’s extraordinary levels of downforce - >1400kg at 240km/h in track mode - while keeping the upper body surfaces free from additional aerodynamic devices that would spoil the purity of the open-top styling.

By following the same exacting Valkyrie ethos, and with just a marginal weight difference to the Coupe, Valkyrie Spider remains a quintessential package of efficient and lightweight solutions. Capable of achieving a vMAX of 330km/h+ with the roof removed (350km/h+ with roof on), its the fastest and most extreme open-top, road-legal Aston Martin ever built. Delivering LMP1 levels of performance, Valkyrie Spider is simulated to set impressive lap times, not normally achievable in a road-going car.

The same driver focused cabin sits at the heart of Valkyrie Spider. F1® inspired low hip-to-heel height and near-central seat positioning, along with a 6-point safety harness to keep the occupants safely in the car. A center rear-view camera system along with front and rear parking sensors will aid the driver at both high and low speeds, with displays sitting just above the Instrument Panel.

Valkyrie Spider features a bespoke, removable lightweight roof comprising of a carbon fibre central panel, latching onto the tub at the rear and to the windscreen surround at the front, along with a pair of polycarbonate roof windows, hinged on either side. On opening the doors, the roof can simply be lifted off and stowed away. Modifications to the carbon fiber tub have been made to support the removable roof panels and the luxury open-top layout, as well as new doors. The now front-hinged dihedral doors, which are unique to Valkyrie Spider, have been redesigned to tilt forwards.

The task of implementing these changes will be completed by Aston Martin’s engineering team, who are also responsible for managing the test and verification process. Extensive use of powerful simulation tools means development of the Valkyrie Spider is already well underway, ahead of the build and physical testing of the first development prototypes.

Aston Martin Chief Executive Officer, Tobias Moers said: “The Aston Martin Valkyrie is the product of incredible innovation and technology, but above all it has always been about emotion. With the Valkyrie Spider we are taking that passion and emotion to the next level. The driving experience promises to be truly sensational. The sound of that 6.5-litre V12 engine revving to over 11,000rpm with the roof removed is something I cannot wait to hear.”

Red Bull Racing’s Chief Technical Officer, Adrian Newey said: “Right from the very beginning of the Aston Martin Valkyrie project we were driven by exacting targets that went way beyond any previous road car and the Valkyrie Spider brings that same ethos to the open cockpit hypercar category. What you see is a simple removable roof panel, but the challenge of remaining true to the Valkyrie concept was anything but. Maintaining aerodynamic performance with the roof removed was of paramount importance, likewise keeping any unavoidable weight gains to an absolute minimum whilst maximizing enjoyment for the driver.”

Following unprecedented demand, the 85 examples of the Valkyrie Spider are over subscribed and allocations will begin shortly, available in both left and right-hand drive derivatives, with first deliveries scheduled for H2 2022.

Valkyrie Spider will be on display at Pebble Beach Concours d’Elegance in Monterey, California (USA) from 12 August - 15 August 2021, viewing by invitation only.

#Aston Martin Valkyrie Spider #Aston Martin #cars #hypercars #valkyrie #aston martin valkyrie #Concours d’Elegance #news #britain #british #200 #pebble beach #first look

116 notes · View notes

greenma28-blog · 4 years

Text

Best Green Crest CBD Oil 2020 !

Green Crest CBD Oil is the most impressive CBD oil available. The endocannabinoid framework (E manages from unwinding to eating, resting, irritation, and even intellectual capacity. More or less, the ECS is answerable for ensuring the whole body is working ideally. CBD Oils have been restoratively demonstrated to emphatically manage your ECS, tending to issues, for example, tension, a sleeping disorder, interminable torment, hypertension, and even cardiovascular issues. CBD isn't a medication, and it is gotten from the Hemp plant, which is especially not quite the same as the Marijuana plant. At the point when the vast majority hear the word Hemp, they quickly consider something that gives you an euphoric "high." While there are minute degrees of THC in the Hemp plant, it is expelled when the CBD is extricated. Weed plants, then again, produce more THC than CBD. Green Crest CBD Oil animates a mitigating reaction, which lessens all types of constant a throbbing painfulness. Standard use likewise assists support with jointing wellbeing, portability, and adaptability.

How To Use Green Crest CBD Oil !

Green Crest CBD Oil helps emphatically manage temperament designs, which diminishes tension and stress. It likewise advances better rest cycles and at times, may offer a protected solution for sadness and bipolar issue. Green Crest's sure effect on the neural framework lessens age-related psychological decay. It additionally enables backing to center, sharpness and memory review while likewise lessening the recurrence of headaches and cerebral pains. On the off chance that you experience the ill effects of interminable body torment, you ought to apply Green Crest CBD Oil on the body part where you feel torment. At that point rub it until it gets totally assimilated. Ordinary utilization of Green Crest CBD Oil helps fill wholesome holes and supports in general wellbeing and health. Green Crest CBD Oils is made with guaranteed natural hemp developed in the USA, which is 100% liberated from any engineered or counterfeit fixings. Each clump is tried for wellbeing and viability to guarantee the virtue satisfies and surpasses industry guidelines.

Benefits of Green Crest CBD Oil?

There are exceptional expectations why any individual will make hemorrhoids over a mind-blowing span. Green Crest CBD Oil will in general be an effect of things like being pregnant, work, being fat, or lifting fundamental articles. regardless, the critical clarification that drives individuals, for instance, you to make hemorrhoids is blocking! The concentrating on an over the top measure of problematic and for a truly drawn out stretch of time is what is regularly what Green Crest Cbd Oil . Blockage may be done by using one or specific zones. it very well may be a brief effect of alliance you are taking, anyway if all else fails it's miles an inevitable result of your eating up standard - An ingesting plan that doesn't gracefully enough fiber, regardless one flooding with sodium and made sure about substances. done ingesting enough water obliges this and diminished development all have an impact in vexatious stools and the progression of hemorrhoids.

How To Get Green Crest CBD Oil?

Green Crest CBD Oil There are specific herbs and oils that you may utilize sufficiently. The fine part is they're typical and not using a signs and appearances. near the above cures you should move a ton of fiber on your reliably eating daily schedule. basic things, veggies and entire grains are the types of food to focus on. Checking at any rate 8 glasses of water multi day is as fundamental. Green Crest CBD Oil evaluation charge adjustments on your using continuous will hold your stools unstable and huge. on thusly they will quit any pretense of doing any further mischievousness and with less hopelessness. So there you have it, how to treat outside hemorrhoids. As I need to may theorize the fine way is the not unusual way. right while you wind up being OK with all you have to around recouping your hemorrhoids, you will be prompted in how to spare any destiny ones from making Click Here https://www.marketwatch.com/press-release/green-crest-cbd-oil-reviews-price-where-to-buy-full-spectrum-essential-oil-2020-04-12

#Green Crest CBD Oil

1 note · View note

carsai-precisionparts · 2 years

Video

cnc machining milling customized machined machinine bearings shafts rods China factory price

KUNSHAN CARSAI AUTO PARTS INDUSTRY CO., LTD https://www.carsai-precisionparts.com/ Whatsapp&WeChat: +8615212743691 email: [email protected] --------------------- cnc machining milling customized machined machinine bearings shafts rods China factory price bearings edmonton supplier，bearings manufacturer，pipe bearing manufacturer，bearings manufacturers in china，bearing supply houses，bearings manufacturing companies in india，bearing-bearing company，abec 7 bearings manufacturer，manufacturer of needle bearings，nrb bearings factory，jewel bearings manufacturer，bridge bearings supplier，enduro bearings factory，bearing qjz2k，bristol bearings supplier，bearings manufacturers uk，cjb bearings factory，bearings supplier manila，engine bearings manufacturer，4 inch bearing，bearing housing bore，bearing manufacturers usa，bearings manufacturer europe，how are bearings assembled，bearings manufacturing company strongsville ohio，v bearings，bearing mfg company，4 bearing，z bearings，bearings manufacturing company，tritan bearings manufacturer，precision bearings manufacturer，ball bearing manufacture process，h series bearings，h bearings，bearings supplier in johannesburg，bearings.com，bearings supplier vredenburg，bearings factory india，factory links bearings，manufacture of bearings，cima bearings factory，manufacturer of ball bearings，manufacture ball bearings，bearings manufacturer poland，bearings supplier in parow，2 bearings，1 bearings，supplier of bearings，rolling bearings factory - krasnik sa，bearings supplier pretoria，4 bearing，furniture bearings manufacturer，y-bearing，bearings supplier singapore，roller bearings manufacturer in mumbai，bearings supplier in dubai，how to polish bearings，waterproof bearings suppliers in india，manufacturer z bearings，ball bearings factory，bearings supplier in isando，pot bearing manufacturer，bearing lf206，manufacturer list of bearings，2 bearings，full ceramic bearings manufacturer，bearings suppliers，bearings suppliers in sri lanka，how bearings are assembled，bearings suppliers in hyderabad，bearings manufacturer in，h bearings，bearings supplier in metro manila，how a ball bearing is made，fiber bearing manufacturer，best bearings supplier，motor bearings factory，how are wheel bearings made，2 bearings，bearings supplier ball bearings，bearings uk supplier，bearings supplier lahore，bearing mfg company，v bearings，bearing and bushing，bearings manufacturers in europe，miniature bearings factory，bridge bearing supplier malaysia，a bearings supplier，1 bearings，bearings dealers，bearings supply，bearings made in usa，z9029 bearing，bearings dealers，bearing l68111，carbon bearings manufacturer，bearing lu，manufacturer bearings in korea，enduro bearings manufacturer，bearings supplier bearings，skf bearing factory，bearings manufacturing process ppt，bearings inc，bearings manufacturing，polish bearings factory，bearings manufacturers in delhi，9 bearings，bearings local supplier，nrb bearings manufacturing plants，nsk bearings manufacturing，manufacturer of sleeve bearings，linear bearings uk supplier，is abec 7 bearings good，bearings supplier in trinidad，bearings supplier skf，bearings manufacturing in india，factory links bearings review，bearings supplier cebu，how is a bearings manufactured，bearings 6307，bearing r16rs，bearing r12zz，bearings suppliers in south africa，bearing z0069，1 bearings，timken bearings supplier，bearings manufacturers，bearings manufacturers in south africa，bearings manufacturer in india，bearings manufacturers in india，hk bearing manufacturer，bearings factory china，bearings limited manufacturer，bearing p204rr6，bearings manufacturer by country，bearings suppliers in zimbabwe，bearings supplier in uae，bridge bearing suppliers in india，elastomeric bearing suppliers in india，kande bearings factory store，z bearings，bearing and bushing，jaf bearing manufacturer，white metal bearing manufacturer in india，bearings supplier near me，supplier bearings philippines，8 bearing，bearing rubber and hydraulics，bearings suppliers in uae，mtk+ bearings factory，ball bearing process，dpi bearings suppliers india，manufacture for bearings，marine bearings manufacturer，bones bearings manufacturer，how bearings are made，skf bearings manufacturer in china，3 bearings，bearings manufacturers in usa，koyo bearings supplier，manufacture of bearings gears gearing and driving elements，v bearings，bearing 627zz，end bearing manufacturer，bearings supplier in sg

0 notes

architectnews · 3 years

Text

House II, Cambridge Massachusetts

House II, Cambridge Modern Residence, Massachusetts Real Estate, American Architecture, Design Images

House II in Cambridge Massachusetts

Nov 20, 2021

Design: Kyu Sung Woo Architects

Location: Cambridge, Massachusetts, USA

House II, Cambridge MA

Architect Kyu Sung Woo designed House II for his wife, a concert pianist, and himself: a couple in their late seventies who are still active, but starting to think about their changing needs. It is located on a small street in West Cambridge, next door to the home they built 30 years ago (House I) where they raised their two children.

House I was built behind a small, existing house to retain the character and scale of the street. The interior was organized vertically around an atrium, reflecting a courtyard typology prevalent in the architect’s native Korea. It is by nature an introverted building, situated behind the original farmhouse, and nestled into the property with privacy in mind.

House II has a narrow volume on the street side, which widens in the back, presenting a sleek, public facade while still maintaining a slim profile. The angle of the roof reflects the sloping topography of the site and the diagonal wooden truss in its framing introduces triangular geometry that is echoed repeatedly throughout the house.

It is designed to create a connection with nature, with full walls of glass on the ground floor, a large patio, and siting that maximizes garden space. Exterior materials were chosen for ease of maintenance as well as freedom of composition: large, fiber cement panels on the public-facing sides create shingles that form geometric patterns and provide depth and shadows; corrugated metal is used for utility on the back sides; and wood on the deck, fence and lower level of the house provides warmth and durability.

The core of the interior is an open staircase and elevator to ensure accessibility in case of problems with mobility as the couple ages. This core creates three fully distinct levels; local areas that are connected spatially by high, skylit volumes.

The first floor living space is organized with a work/dining area in the central space opening up to the garden and deck with expansive glass walls. The piano sits in the corner to allow for performances accommodating up to 30 guests. Sliding pocket doors near the kitchen and entryway allow the space to transform for different occasions and ambiance.

The upper level features a work/living area in the front of the house, marked by a large corner window which provides a connection to the street. The master suite is located in the back, connected by an accessible bathroom to the front area, allowing for flexibility in case they need to rearrange sleeping arrangements.

The lower level features a guest bedroom, living area and expansive studio space connected spatially by triangular skylights to the main level and opening directly onto the garden.

The garden is designed by Michael van Valkenburg, with planting focused on maximizing seasonal effects, with leaves and blooms providing color year-round. There is access from both the ground floor and lower levels, with sloping steps and a circular path connecting them, punctuated by a 10’x12’ schist panel landing terrace.

House II in Cambridge Massachusetts – Building Information

Project Name: House II Owner: Private Location: Cambridge, MA Project Site Area: 5,000 sf Building Gross Area: 3,687 sf Schedule: Design 01/2016 – 01/2017 Construction 02/2017 – 12/2019 Building Materials: Fiber cement for siding; Corrugated metal for siding; Ipe wood for decking and siding; Ash wood for flooring and core siding

Architect: Kyu Sung Woo Architects, Inc. Watertown, MA, USA Principal: Kyu Sung Woo Project Architect/Project Manager: Seth Hoffman Design Team: Jae Young Jo Landscape Architect: Michael Van Valkenburgh Associates, Inc. Cambridge, MA, USA Structural Engineer: RSE Associates, Inc. Watertown, MA, USA MEP/FP Engineer: Sun Engineering Danvers, MA, USA Civil Engineer: Sherwood Consulting & Design, LLC Cambridge, MA, USA Lighting Designer: Nathalie Faubert New York, NY, USA General Contractor: Stack + Co. Boston, MA, USA Landscaping: J.M. King Millis, MA, USA

Photographer: Jane Messinger Somerville, MA, USA

House II, Cambridge Massachusetts images / information received 201121

Location: Massachusetts, USA

Massachusetts Buildings

Massachusetts Architecture

Franklin County Justice Center, Greenfield, MA Design: Leers Weinzapfel Associates photograph © Brad Feinknopf Franklin County Justice Center Building in Massachusetts

Perles Family Studio, Jacob’s Pillow Dance, Becket Design: David Croteau of Flansburgh Architects photo : Robert Benson Photography Jacob’s Pillow Dance Building in Becket

Massachusetts College of Art and Design – Design and Media Center Design: Ennead Architects photograph © Peter Vanderwarker Massachusetts College of Art and Design Building

New York State Buildings

New York State Architecture – NY State

Olnick Spanu House, Garrison Design: Alberto Campo Baeza Contemporary New York House

HSU House, Ithaca Design:EPIPHYTE Lab, Architects

Holley House, Garrison Design:hanrahanMeyers architects

A classic Modern US house:

Farnsworth House

Comments / photos for the House II, Cambridge by Makethinkdesign page welcome

Massachusetts

The post House II, Cambridge Massachusetts appeared first on e-architect.

#e-architect

0 notes

esglatestmarketnews · 3 years

Text

Rear Spoiler Market Statistics, Growth Prediction, Competitive Research And Outlook till 2025

September 23, 2021: The Global Rear Spoiler Market is anticipated to reach USD 7.30 billion by 2025 with the contribution of growing demand for the SUVs and MPVs from the young generation. A Rear Spoiler is an automotive aerodynamic device that helps in spoiling the opposing air movement across the body of the vehicle. The spoilers present on the front of the cars are called as air dams that are essential for the engine cooling and high speed stability.

Some spoilers are fitted on the cars just for designing purpose or for improved aerodynamics. A rear spoiler supports in increasing the efficiency and decreasing the drag. The spoilers improve the traction capability of a car, improve the visibility of the car and reduce the weight of the car, technically. The Rear Spoiler Market is predicted to grow considerable at CAGR of 7.9% primarily owing to the manufacturing of plastic spoilers.

At present, several cars are well-furnished with Rear Spoilers to improve the fuel efficiency and reduce the rate of accidents. Most customers install the rear spoilers for designing purpose, which is a reason for increased demand. The bulk manufacturing of composite materials is anticipated to diminish the cost of raw materials in near future. This will ultimately reduce the overall cost of rear spoilers and produce a higher demand over the years.

Request a Free Sample Copy of this Report @ https://www.millioninsights.com/industry-reports/rear-spoiler-market/request-sample

The rising demand from SUVs (sports utility vehicles) and high-speed vehicles is expected to support the rear spoiler industry growth significantly. The carbon fiber, which is mostly used in the manufacturing of rear spoilers is preferred by the aftermarket since the customization is carried out by the independent service providers. The rear spoiler also possesses features like high strength, durability, improved finishing and appearance and lightless.

The Internal Combustion Engine is projected to dominate the rear spoiler industry in the near future. Maintaining the balance of the car at higher speeds and providing aerodynamic features are among the major advantages to manufacture Internal Combustion Engines. This will further support the rear spoiler from the automobile sector. The rear spoilers manufactured from the hybrid segment is predicted to contribute the CAGR impressively over the years. Such a penetrating of hybrid vehicles from the different parts of the world economies will boost the market growth. Depending on the vehicle segment, the hatchback segment is expected to dominate the market due to compact size and rates.

The hiked prices of the rear spoiler along with environmental concerns are majorly driving the automotive producers to develop fuel efficient cars with low emissions. Owing to the recent years, the fuel efficiency need is progressively rising in the automotive industry. Due to this reason, the extensive research is experiencing the development of aerodynamically improved vehicle designs. Hence, the demand for this improved product is expected to contribute largely to the rear spoiler market. Nevertheless, the rear spoiler installation and maintenance are very costly which may restrict the market growth in the coming years. The rear spoiler providers many a times offer suitable devices at reasonable rates and with after sale services for gaining customer confidence.

The rear spoiler industry is categorized on the grounds of vehicle type, material type, sales channel, technology, fuel, design and region. On the grounds of vehicle type, the market is divided into Hatchback, SUV and MPV. On the grounds of material type, the industry is divided into ABC Plastic, Fiber Glass, Silicon and Carbon Fiber. On the grounds of sales channel, the market is divided into OEM and After Market. On the grounds of technology, the rear spoiler market is divided into Blow, Injection and Reaction Injection Molding. On the grounds of fuel, the industry is divided into ICE and BEV. On the grounds of design, the market is divided into Strips and Free Standing Wing.

Browse Full Research Report @ https://www.millioninsights.com/industry-reports/rear-spoiler-market

Some of the prominent rear spoiler industry participants are across the globe are Jiangnan Mould and Plastic Technology Co., Ltd. Albar Industries Inc., SMP Automotive,P.U. Tech Spoiler, Polytec Group, Thai Rung Union Car Plc., Rehau Ltd., Inoac Corporation, Plastic Omnium, SRG Global, AP PlasmanInc and Magna International.

Market Segment:

Rear Spoiler Vehicle Type Outlook (Revenue, USD Million; 2014 - 2025)

• Conventional Car

• Green Vehicle

Rear Spoiler System Type Outlook (Revenue, USD Million; 2014 - 2025)

• Passive Spoiler

• Active Spoiler

Rear Spoiler Regional Outlook (Revenue, USD Million; 2014 - 2025)

• North America

• U.S.

• Canada

• Mexico

• Europe

• Germany

• U.K

• Asia Pacific

• China

• Japan

• India

• South America

• Brazil

Get in touch

At Million Insights, we work with the aim to reach the highest levels of customer satisfaction. Our representatives strive to understand diverse client requirements and cater to the same with the most innovative and functional solutions.

Contact Person:

Ryan Manuel

Research Support Specialist, USA

Email: [email protected]

0 notes

wahid007posts · 3 years

Text

Global Molded Pulp Packaging Market intelligence with competitive landscape in 2024

According to the new market research report Molded Pulp Packaging Market by Source Type (Wood & Non-wood), Molded Type (Thick Wall, Transfer, Thermoformed, Processed), Product (Trays, Bowls, Cups, Plates, Clamshells), End Use, and Region - Global Forecast to 2024', published by MarketsandMarkets™, the Molded Pulp Packaging Market size is projected to grow from USD 3.5 billion in 2019 to reach USD 4.4 billion by 2024, at a CAGR of 4.4%.

Get PDF brochure of the report: https://www.marketsandmarkets.com/pdfdownloadNew.asp?id=36997090

105 market data Tables and 35 Figures spread through 138 Pages and in-depth TOC on "Molded Pulp Packaging Market”

The transfer molded segment, by molded type, is projected to dominate the molded pulp packaging market throughout 2024

The transfer molded segment is projected to account for the largest share in the molded pulp packaging market, in terms of value and volume, from 2019 to 2024. The rising urbanization and increasing consciousness for better packaging and increasing environmental awareness among people are some of the factors leading to the increased use of molded fiber packaging. Molded fiber packaging not only provides protection but also prevents breakage during transit across the supply chain. Although the demand for recycled packaging has been growing for years, molded fiber has traditionally been associated with items such as box inserts, cup carrying trays, and egg carton packaging that had limited consumer appeal.

The bowls segment, by product type, to register the highest growth in the molded pulp packaging market during the forecast period

The tray segment is expected to retain its dominance throughout the forecast period, owing to the expected increase in the consumption of eggs and fruits in the near future along with its attributes such as less weight and recyclability. The numerous advantages of molded pulp packaging with respect to sustainability, recyclability, and sturdiness for various applications is widely accepted in the foodservice industry. The increasing demand for eco-friendly, recyclable, and sustainable bowls making it grow at the highest CAGR in the molded pulp packaging market, during the forecast period.

The electronics segment, by end-use industry, to register the highest growth in the molded pulp packaging market during the forecast period

Following the trend in the direction of sustainability, packaging developers are adopting various packaging solutions for a wide variety of applications made from recyclable molded fiber packaging. Thus, more retailers, manufacturers, and consumers in the markets are adopting sustainable molded fiber packaging solutions. Electronics items are generally fragile and require packaging that can protect them from damage during transportation and storage. Molded fiber pulp is widely accepted for packaging of electronics items, as it provides excellent shock absorbing, compression resistance, and thermal and atmospheric resistance properties during handling and shipping. Molded pulp packaging offers protective functions such as cushioning, void fill, and blocking & bracing to the electronics items, thereby increasing the demand for molded pulp packaging in this sector.

The Asia Pacific molded pulp packaging market is projected to register the highest CAGR during the forecast period

Asia Pacific is projected to be the fastest-growing region in the molded pulp packaging market, in terms of value. This is attributed to the presence of an increasing number of molded pulp packaging manufacturing units in countries such as China, India, Australia, Indonesia, and Bangladesh in the Asia Pacific region. In addition, these countries are the largest exporters of packaging materials globally. Due to cheap labor costs and availability of domestically produced raw materials, manufacturers prefer setting up manufacturing units for the production of the packaging industry in Asia Pacific countries.

Key Market Players

The molded pulp packaging market is dominated by large players such as Brødrene Hartmann A/S (Denmark), UFP Technologies (US), Thermoformed engineered Quality (TEQ) LLC (US), Genpak LLC (US), and Eco-Products (US). Other players include Pro-Pac Packaging (Australia), PrimeWare-by PrimeLink Solutions (US), Fabri-Kal (US), Henry Molded Products (US), EnviroPAK Corporation (US), Pacific Pulp Molded (US), Sabert Corporation (US), Protopak Engineering Corporation (US), and Cellulose de la Loire (France)

Early buyers will receive 10% free customization on this report.

Don't miss out on business opportunities in Molded Pulp Packaging Market.

Speak to Our Analyst and gain crucial industry insights that will help your business grow.

https://www.marketsandmarkets.com/speaktoanalystNew.asp?id=36997090

About MarketsandMarkets

MarketsandMarkets is the largest market research firm worldwide in terms of annually published premium market research reports. Serving 1700 global fortune enterprises with more than 1200 premium studies in a year, M&M is catering to a multitude of clients across 8 different industrial verticals. We specialize in consulting assignments and business research across high growth markets, cutting edge technologies and newer applications.

Contact: Mr. Ashish Mehra MarketsandMarkets™ INC. 630 Dundee Road Suite 430 Northbrook, IL 60062 USA: 1-888-600-6441 [email protected]

#Molded Pulp Packaging #Molded pulp packaging market #Molded pulp packaging industry #Molded pulp packaging companies #packaging industry

0 notes

hongyuan · 3 years

Text

summary-1

A new epoxy based ink is reported, which can 3D print lightweight porous composites and control the alignment of multi-scale and high aspect ratio fiber reinforced materials, so as to create a hierarchical structure inspired by balsa wood. The young's modulus value can reach 10 times that of existing commercial 3D printing polymers, while maintaining comparable strength values.

Epoxy based ink is composed of epoxy resin (EPON 826 epoxy resin, momentous specialty chemicals, Inc., Columbus, oh) mixed with appropriate amount of dimethyl methylphosphonate (DMMP, sigma Aldrich, St. Louis, Mo) and nano clay sheet (cloisite 30b, southern clay products, Inc., Gonzales, TX), silicon carbide whisker (si-tuff sc-050, ACM, Greer, SC) and milled carbon fibers (dialead k223hm, Mitsubishi plastics, Tokyo, Japan), using a THINKY planetary centrifugal mixer (THINKY USA, Inc., THINKY USA, Inc., Laguna mountain, California), using a custom adapter in a 125 ml glass container. Imidazole based ionic liquids as potential curing agents (basionics vs03, BASF intermediate, Ludwigshafen, Germany)

In conclusion, they found the first 3D printed porous composite composed of oriented fiber filled epoxy resin, which has excellent mechanical properties. Since the high aspect ratio filler is aligned in the printing direction, the construction path itself can be used to spatially control its direction within the part. This function adds a new dimension to engineering design and optimization, in which the composition, stiffness and toughness of block 3D objects can be digitally integrated with component design to achieve a highly optimized structure. For example, you can align reinforcement around geometric stress concentration points, or grade stiffness near fixed points to minimize damage. In addition to creating structures that mimic light wood, our method is very suitable for manufacturing various bionic composite structures with controlled structure and mechanical properties.

Citation：

Brett G ; Jennifer A Advanced materials (Weinheim), 2014-09, Vol.26 (34), p.5930-5935 https://onlinelibrary-wiley-com.huaryu.kl.oakland.edu/doi/full/10.1002/adma.201401804

0 notes

daisyri-me · 3 years

Text

Automotive Textiles Market : Future Demand, Market Analysis & Outlook to 2024

The global Automotive Textiles Market is expected to value at USD 31.75 billion by 2024. Automotive textiles industry is subject to witness a substantial growth due to the increasing demand for advanced safety features in both lightweight and heavyweight vehicles, and mandatory administrative regulations for incorporation of safety measures, majorly in the developed economies such as U.S. and the UK. Factors responsible for sustained market growth, in the recent years, include large number of production lines in automotive manufacturing from Asia Pacific region and rising number of vehicles sales each year across the globe.

Additionally, increasing investment by leading industry players to promote adoption of automotive textiles is expected drive the growth of automotive textile market over the forecast period. Increasing vehicle manufacturing in Asia-Pacific region and growing penetration of automotive sector in both developing and developed economies are predicted to foster market expansion in the upcoming years. However, lack of awareness among users about benefits of automotive textile solutions and higher initial cost of the products are expected to restrain market growth to a certain extent.

Get Sample Inquary @ https://www.millioninsights.com/industry-reports/automotive-textiles-market/request-sample

Increasing demand for advanced textiles and large number of application in automotive across Asia Pacific region are expected to favor market growth. Rising awareness regarding large-scale use of automotive textiles due to its properties such as environmental-friendly and bio-degradability are estimated to fuel the growth of automotive textile industry over the forecast period. Other factors responsible for amplifying market value of automotive textiles are easy availability, and variety of clothing materials with range of stylish designs, bright colors, and attractive prints.

Numerous governmental initiatives promoting use of woven textiles instead of artificial fibers are estimated to boost the market demand for automotive textiles in near future. Additionally, stringent governmental laws and regulation prevalent in the respective regions in regards to the environmental impact of artificial textiles are positively affecting market performance over the last few years.

However, regulations such as anti-dumping duties on the large-scale import of automotive textiles and raw materials are hampering market performance to a certain extent. Furthermore, variations in prices of raw materials and price suppressions prevailed on imports of automotive textiles are restraining market growth. The increase in the overall manufacturing of automotive textiles Asia-Pacific countries such as China, Taiwan, and India are leasing to an oversupply in these countries.

The automotive textiles market is broadly categorized into four major segments based on the application type such as upholstery, tires, safety devices and engine components. The upholstery devices is considered as one of the fastest growing segment in the automotive textiles industry with substantial revenue generation in the last few years. Growing popularity of automotive textiles in the upholstery segment is attributed to the higher market penetration. The safety devices segment has also witnessed substantial growth due to the growing user awareness and stringent government regulation regarding adoption of safety features in the vehicles.

Automotive textile market is divided by region as North America, Europe, Asia-Pacific, Latin America and Africa. North America has shown major growth in recent years owing to the rise in the implementation of latest technologies in automotive sector, increase in the number of research & development activities in the region and existence of well-established industrial infrastructure. Asia-Pacific region is predicted to hold major market share in the automotive textiles with massive growth in forecast period. Countries such as India, China and Japan are leading the Asia-Pacific market with rapid industrialization, robust growth of automotive sector, favorable government laws & regulations, and significant investment by leading industry players considering potential growth opportunities in the region.

The key players in the automotive textile industry are Trevira Co., E. I. du Pont de Nemours and Company, Sage Automotive Interiors, Inc., Baltex Ltd., Reliance Industries Ltd., Auto Textile S.A, Global Safety Textiles Co., SMS Auto Fabrics, Inc., Autoliv Co., Lear Co., Johnson Controls, Inc., Suminoe Textile Co., Ltd., ASGLAWO Technofibre, Inc., and CMI-Enterprises, Inc.

Get Full Details On: https://www.millioninsights.com/industry-reports/automotive-textiles-market

Market Segment:

Automotive Textiles Product Outlook (Volume, Kilo Tons; Revenue, USD Million, 2014 - 2024) • Woven • Nonwoven • Composites • Others

Automotive Textiles Application Outlook (Volume, Kilo Tons; Revenue, USD Million, 2014 - 2024) • Upholstery • Tires • Safety Devices • Engine Components • Others

Get in touch

Contact Person:

Ryan Manuel

Research Support Specialist, USA

Email:[email protected]

#Automotive Textiles Market Size

0 notes

rdagade · 3 years

Text

Global Medical Polymer Market

was valued US$ XX in 2019 and is estimated to surpass US$ XX Billion market in at a Compound Annual Growth Rate (CAGR) of XX % during the forecast period 2019-2027 globally. The report includes the analysis of impact of COVID-19 lock-down on the revenue of market leaders, followers, and disrupters. Since lock down was implemented differently in different regions and countries, impact of same is also different by regions and segments. The report has covered the current short term and long term impact on the market, same will help decision makers to prepare the outline for short term and long term strategies for companies by region.

To know about the Research Methodology:-

Request Free Sample Report

Global medical polymer market is driven by rising geriatric population and prevalence of chronic diseases, which significantly boosted demand for medical implants. In addition, medical polymer market is witnessing high growth globally owing to the high acceptance and adoption of polymers for product manufacturing. Increasing geriatric population is expected to result in the rise in healthcare facilities, which is expected to drive the industry growth. This is expected to aid the growth for medical devices and therefore have a positive impact on the overall medical polymers market. Increasing bio-compatibility of plastics has also been a significant cause for the medical polymer industry growth. Medical polymer possess low weight compared to the metallic material hence are preferred for a variety of applications in medical industry. Medical grade fibers & resins will dominate the market by 2026, attributed to its superior properties such as high thermal and chemical resistance together with ease of sterilization. Fibers and resin segment accounted for the largest share in 2018 owing to high use in various applications including hip & joint replacement surgeries, spinal implants, and different injuries. While biodegradable plastics is estimated to grow at highest CAGR of 16.1% over the forecast period in terms of revenue, owing to health concerns regarding synthetic polymers. Increasing expenditure on healthcare along with the presence of well-equipped hospitals have a positive impact on hospital accessories segment growth. Increasing demand for surgical instruments and tools such as gloves, clamps, forceps, syringes, surgical trays, medical bags, and catheters is expected to drive demand for medical polymers over the forecast period. Medical polymer segment has further dominated the hospital accessories segment due to their high flexibility, low manufacturing cost, and high infection resistance compared to other metallic materials. Implants application segment held the largest market share in 2018, due to a high demand for implants for replacement surgeries such as a knee, hip, joint, and dental. Demand for implants is growing primarily due to increased incidences of chronic diseases and increasing global geriatric population. Applications such as cardio implants and devices and tissue engineering may propel the growth of the global market in the near future. Polymers are widely used in the medical sector, including diagnostic systems, implants, and accessories. Intraocular lenses, contact lenses, facial implants, vascular grafts, breast implants, catheters, dental implants, and prosthetic hearth valves are a few examples of where the medical polymers are used. North America accounted for the largest share of the medical polymer market followed by Europe, and the Asia Pacific. North America is dominant owing to increased prevalence of chronic disease, and a high transplant surgery rate. In addition, the population having a higher awareness of health benefits like low product cost and enhanced performance polymers have further boosted the overall growth. Also, the presence of major manufacturers and their well-established network in the region have also helped in the overall growth. Asia Pacific region is expected to see growth in medical polymer market during the current forecast period due to the rising awareness for low cost but advanced materials and their related benefits. The objective of the report is to present a comprehensive assessment of the market and contains thoughtful insights, facts, historical data, industry-validated market data and projections with a suitable set of assumptions and methodology. The report also helps in understanding medical polymer market dynamics, structure by identifying and analyzing the market segments and project the market size. Further, the report also focuses on a competitive analysis of key players by product, price, financial position, Purity portfolio, growth strategies, and regional presence. The report also provides PEST analysis, PORTER's analysis, SWOT analysis to address questions of shareholders to prioritizing the efforts and investment in the near future to the emerging segment in medical polymer market.

For more information visit@ https://www.maximizemarketresearch.com/market-report/global-medical-polymer-market/12507/

The Scope of the Global Medical Polymer Market: Inquire before buying

Global Medical Polymer Market, By Product type:

• Fibres and Resins • Medical Elastomers • Biodegradable Medical Polymers

Global Medical Polymer Market, By Application:

• Implants • Diagnostic Systems • Hospital Accessories

Global Medical Polymer Market, By Geography:

• North America • Europe • Asia Pacific • Latin America • Middle East and Africa

Key Players analyzed in Global Medical Polymer Market:

• Eastman Chemical Company • Evonik Industries AG • The Dow Chemical Company • Formosa Plastics Corporation USA • Arkema SA • BASF SE • Covestro AG • DSM N.V. • Solvay S.A • Celanese Corporation • Victrex Plc. • DuPont • Tianjin Plastics Research Institute Co. Ltd • Lubrizol Corporation • Bayer • Celanese • Eastman Chemical • Borealis • DSM • ExxonMobil • Huizhou Foryou Medical Devices • Kraton Performance Polymers • Victrex

This report submitted by Maximize market Research Company

Customization of the report:

Maximize Market Research provides free personalized of reports as per your demand. This report can be personalized to meet your requirements. Get in touch with us and our sales team will guarantee provide you to get a report that suits your necessities.

About Maximize Market Research:

Maximize Market Research provides B2B and B2C research on 20,000 high growth emerging opportunities & technologies as well as threats to the companies across the Healthcare, Pharmaceuticals, Electronics & Communications, Internet of Things, Food and Beverages, Aerospace and Defense and other manufacturing sectors.

Contact info:

Name: Lumawant Godage

Organization Address: MAXIMIZE MARKET RESEARCH PVT. LTD.

Email: [email protected]

Address: Omkar Heights, Sinhagad Road, Manik Baug, Vadgaon Bk,Pune, Maharashtra 411051, India.

Contact: +919607195908

#Global Medical Polymer Market

0 notes

stone-man-warrior · 3 years

Text

February 7, 2021: 12:25 pm:

====================================================

I have a prediction to make based on aggregate Twitter news stories presented over the past two weeks of so, the tweets are very subtle, small indicators buried within other terror command stories.

The Prediction:

Joe Biden will be killed off, Kamala Harris will become US President. That will happen before 2022, is looking like a airplane crash, so, could be any kind of thing where wings, or air, or jet, or some other connecting dot to an airplane or a part of one, or characteristics of flight, Bernoulli, Vector, Doppler or French Curve, the latter being of most concern.

The thing that puts this prediction into a place that I felt I want to say so, is two Tweets featuring Second Husband Doug Emhoff standing at the Washington Monument Reflecting Pool where there is a Art Installation called “Shattered Glass” and is a portrait of Ms. Harris on the left side of a two-piece glass framed structure there at the Reflection Pool. Had I not seen those two Tweets, I would not be making this prediction where it appears to me as the SAG/Britain/Vatican plan includes that Kamala Harris will become President by virtue of a Two-Piece Biden.

I cannot possibly piece this one together to spell it out more clearly, it’s too complex, too sophisticated terror comm, is presented on Twitter from major news media Verified Accounts.

Maybe something more revealing will show up, if so, I’ll say so when I see it.

So, far, this same path of observation has revealed that Kamala Harris and her Husband are in league with the Donald Trump “Afterswords” variety of terror cell members called “Greek Alphabet”, and might be also called “Grecian Formula 16″.

(There may be clues to the “Grecian Formula 16″ nomenclature contained in the video work that was done at the Indianapolis 500 when Alpha & Beta went there to Start the Engines that day. That video of what was said to be “Air Force One” flying over the race track is clearly a Twitter Time Warp Terror piece, and that airplane shown is more likely to have been one of the ones that the Vatican supplied Donald Trump with long ago, the ones that are all adorned with so much Gold Trim on the Inside)

Once again, the updated Greek Alphabet member list:

Greek alphabet update 2-4-2021:

Alpha = Donald Trump

Beta = Melania Trump

Gamma = Mike Pence

Delta = Karen Pence

Epsilon = Mike Pompeo

Zeta = Susan Pompeo

Eta = Kamila Harris-Emhof

Theta = Doug Emhof-Harris

(I suspect Doug Emhof-Harris is associated to Asante Health Three Rivers Medical Center Emergency Room Dr. Janet Eoff and address at 598 Jackpine Dr. Grants Pass OR 97526, and all of SAGClubMed terror cells)

================================================

1:02 pm:

In the event that someday these reports are looked at, and work begins to stop the terror take over of USA, the people who do that work might try to use audio surveillance of the Southern Oregon Area Residents, if so, be advised and consider these details as you do that:

The terror in Oregon is powered by Britain, Screen Actor Guild, and the Music Industry on two continents, they have the very best audio and broadcast equipment and software there is, and they have technologies that are ten years ahead of what is available outside of terror control, not available in stores, technology that has not been publicly spoken of, and that was developed especially for fooling those who listen with surveillance.

The other thing to consider, is the inhabitants of Southern Oregon are illiterate, most don‘t read English, or any written language, they speak and read a customized “British Still Language”, some of which I have learned to read, and have shared much about how to read the “Word Magic” as SAG calls it, I say it’s “Alternate Intuitive English”. The language has no real rules, it sort of has a way of spelling it’s self out within Dictionary English as needed. My understanding is the the English Language was crafted as a secret language used for the purpose of taking the Ottoman Empire long ago, and has mainstreamed since that time, along with the Crusades that bring it, like a plague is brought on Twitter, is fake, everyone accepts that it’s real, special rules are provided, everyone follows the special rules created from the imaginary plague. For English Language, non-terror pirates, are confined to the English Dictionary, and scolded when they spell something incorrectly, while the terror pirates use the English Language in ways that are far outside the lines drawn in the dictionary.

So, when doing surveillance, and hearing what sounds like people speaking English, when done in Oregon, is not going to be face value Dictionary English, what is heard is the British Still variety of Word Magic Alternative Intuitive English, so, surveillance is only as good as the interpreter who hears what is spoken.

English speaking scholars who read books from around the world and need to choose a book that was translated from another language to English, are as concerned about who did the translation, as they are about the author of the book. When the same book is available, re-written by more than one translator, that presents a problem to the person who wants to learn by reading the translated book, that person needs each version of the translation to make comparison, in order to learn.

======================

1:40 pm:

Some memory of events that took place at Pain Specialists of Southern Oregon on February 3, 2021:

In addition to what I already wrote down, this:

The “nurse” who handed me the container for the Urine Sample was a woman with dark shoulder length wavy hair, white, about 45 years old, about 5′ 5″, about 190 - 200 lbs. She lunged at me from the other side of the back office nurse station after I commented about why she had signed my name on some documents, and she explained that she thought my hand had been cut when I grabbed the sword that had come through the wall in Exam Room #2, from Exam Room #3, and that was the reason she signed my name on the documents there. That gal was stuck in the throat with a fingernail clipper in defense when she began to climb over the counter top towards me, as she thought I had been injured with Paul Leppert’s sword.

Then, as I closed the door to the rest room, an arrow/bolt shot from a cross-bow grazed past me and lodged into the wall above the sink near the hand towel dispenser in the foremost of the two restrooms there. I returned the arrow/bolt to the nurse counter, rather than keep it as evidence because the arrows are fitted with listening devices inside of the shaft, so, keeping one of those only causes more problems later on. You have to leave the arrow/bolts where you find them, I already learned that the hard way.

The Urine Sample nurse is suspected to have been a woman who lives at the corner of Russell Road and Three Pines Road, on the north side of Three Pines, at a place that is known as a AARP terror cell, and where Mike, of “Mike’s Plumbing Service” lives, a big man, about 350 lbs or more, who is known to frequent at the Myers 560 Jackpine terror cell from time to time. I saw the surfboard they stole from me there in a tree, was broken in half, at that residence in the front yard on Friday when I went to Walmart. That means they have some of the other personal items that were also stolen from me that day when the surfboard was stolen. If I say what more was stolen, some other asshole will read this, and claim that the items belong to them, so, I can only say that the surfboard and some personal items, including some gold and silver was stolen that day. It’s too dangerous for me to do a complete assessment of what was stolen from the storage building, as the Monroe terror cell has cameras pointed at my yard all over the place, so, when I go outside to do anything, a whole bunch of terror soldiers begin to show up when Monroe tells the others that I am outside and in range of a cross-bow.

At the terror doctor, when I went to leave the building, and the door was locked such that no one could leave, I was allowed to leave only when they determined that I did not have that arrow/bolt that was shot into the restroom at me. Had I kept the arrow/bolt and tried to leave with it, there would have been another attack in the front lobby, where about seven fake patients had gathered, and at least two special assassin soldiers had just arrived in a black pick-up truck, I passed by them very close as I walked to my car once I was allowed to leave the building. By the time I left, I defended in hand to hand combat against two terror soldiers, Paul Leppert, and that woman who I believe lives at Three Pines Road north side, corner of Russell Road where a weird looking dead tree was carved to look as a yard art of some kind.

The AARP terror cells are many, and they are scattered around in small groups of houses. American Association of Retired Persons ... that AARP. They are the same as Democrat national Convention terror cells are, you could say either thing, and be talking about the same conglomerate terror cell, is very large, many millions of members. AARP is famous for a lot of things, they target elderly and disabled people for “Kill & Replace”. They use “The Hartford” insurance, and “Consumer Cellular” and many other AARP Family of Brands for targeting elderly and disabled people for murder.

There are other AARP terror cell residences at the corner of Three Pines and Monument drive, at the group of houses that are mustard color houses there where the Centurylink main fiber optic cable access terminal box is at on Monument Drive, and the fiber optic cable is routed in packets of copper buried cable from there, to all of the neighborhoods around this area. There is another such main terminal access box at the corner of Russell Road and Pleasant Valley Road. All of the wires in the access boxes are connected to the wrong terminals inside the access boxes intentionally, to advance the terrorism by luring federal officers to the wrong addresses when they do surveillance work around here. Centurylink ISP knows all about that, they participate in the terror lure of federal officers to the wrong addresses. The federal officers keep going to the local courts to obtain the proper warrants for the listening, but the judges are all actors from Screen Actor Guild, are fake, the whole courthouse is under control of a giant size terror cell, it’s an extermination center, and is specifically controlled by Britain terror operatives. Same is true for all of the Oregon courthouses.

That system of Centurylink “Spaghetti Phone Lines”, where no one knows exactly where the ends of the wires really are at, is used as a model system in other cities around USA and the world.

Please study this account for more about the “Spaghetti Phone Lines”. Search for “Two-Pair”. “Four-Pair”, “Eight-Pair” “Buried Cable” “Copper Tape Wrap Ground” and don‘t forget about “Medusa”, the PBX switchboards they also use to further phuck the phone system in addition to the Stingray and VOIP re-routing and the local terror “Call Centers” where calls are routed to, and operators there have duplicate systems of all of the major banks, insurance companies, and other “customer support” systems, all duplicated, and under terror control. There is such a call center at Siskiyou Communications (US Cellular Phone Provider) on 6th Street across from Kelly’s Tool Box Auto Repair. Also, if surveillance is done at either of my addresses, then, special circumstance is that one of the phone lines that serves one of my addresses was stolen from me, and is attached to the wrong terminal in the access boxes on Jackpine Dr., was stolen in around 2007.

Also, as of this month, ALL of the Centurylink customers were provided a new and different account number, and, my account number change also included a Centurylink Billing Department address change. Since the communication problems have not been repaired, are still Spaghetti Phone Lines, and have been for as long as I can remember, I can only assume that the account number change that ALL of the Centurylink customers were subject to is all about some kind of extra special foolery that Centurylink is doing for the purpose of faking out investigative people, and to continue the advance of Global Domination Under the Cross to which end Centurylink is a major part of, nearly equal to Pacific Power Corporation in size and scope of the offensive usefulness they serve on the US Population.

Account number changed from a format that was that of a local telephone number, even for those who do not have land line telephone’s, to a nine digit number that does not seem to be associated to any other kind of format, like the account/phone number format was.

The address I am supposed to send payments to also changed this month, from a Washington State address, to an Arizona Centurylink billing office location.

=================================

3:14 pm:

This guy here is ordering a custom tailored Kyle.

He has some luggage, his pants are flood pants around his ankles, his jacket does not fit, is way too small.

nothing says “send me a custom tailor” quite like a professional Football Player on Game Day at the Big Show with luggage and a suit that does not fit.

These assholes all know what is really going on at the stadium, where a walk up to the concessions stand is a one way trip for the fans at the game, and that is if the fan makes it into the stadium alive.

There is a “Grey Area” built into most of the sports stadiums. The fans come in a little early, they have to show their ticket, but not give it to anyone, then the fans come in to to the stadium after showing that they have a ticket. Then, after a few dozen fans are inside, there is another place within the stadium, is like a bottleneck, could be a number of doors that there are there between the entrance, and the seating area, a place where you give your seating ticket to an usher. That place, will suddenly close, all the doors shut, at the same time, the people at the entrance where you show your ticket, they stop letting people into the stadium for about ten minutes. So, there comes a time when some fans are inside, and no other fans are coming in, the doors at the usher close, and in that “Grey Area”, there are people with trash cans, with motorized “John Deer Mule” style carts, there are people with other kind of “Laundry Carts” made with a fabric bag, are big. Those people with the carts are there, and the fans are told to line up at the correct Usher door for their seating ticket, then, “Last in Line” happens.

There are “Handlers” and there are terror soldiers w/swords.

The handlers remind the swordsmen: “Just hold your sword horizontally, and move forward, that’s all you have to do, just hold your sword horizontally and move forward, no one will bother you, we have you protected, so just hold your sword horizontally and move forward.”

They are “The Last In Line” at the Usher door in the Grey Area between the entrance to the stadium, and the seating area, where there is a bottleneck built in to the attack zone.

So, on command, the swordsmen simply hold the sword horizontally, and move forward toward the Usher door, right through about twenty to thirty fans at each door, typically there are about six doors wide in each Usher Area. So, within about ten to fifteen minutes, the heads of about 100 fans come off, as the swordsmen simply walk forward. The others with all of those different carts begin to do clean up immediately, the bodies go into one kind of cart and are hauled away to get wallets, keys, and valuables off of them, the heads go into another kind of cart, and are taken to a different place, to await arrival of all of the wallets and purses. Once the heads, keys, driver licenses are all gathered, that is when the SAG operatives begin to make arrangements for Nancy Sinatra to “Cast” the appropriate Look-a-Like replacements that are available from Canada, where a cross reference to US DMV records is kept, matched, and the look-a-like deployed back to the victims home, in the victims car, with the correct amount of passengers in the car. There may be a temporary team that goes back to the victims home after the game, so that Nancy Sinatra can have time to cast the right people into the long term role of the US Citizen Football Fan who went to the SuperBowl.

Those people with the carts who do the immediate clean up, all take everything away, and another crew has water hoses, to spray the concrete to clean away any spilled blood.

All of that at the Usher Door Bottleneck takes only ten minutes or less. The kill happens as there is a person at the Usher Door announcing some rules, saying some things that require the victims to look closely at their tickets, and that is when the “Last In Line” hold their swords horizontally, and move forward.

The place is fogged with nitrous oxide to prime the victims, and with Medazolam to prevent any witnesses from remembering what they saw at the game.

Happens at music shows, sports, theaters, anywhere that has a built in “Grey Area” between the entrance and the seating area.

They take Three Percent of the population at the event, then process what they took, and find the replacements who take the place of the victims, and Vote for the Shills that are put on the ballots by the people who arrange the Three Percent Taking, Screen Actor Guild members.

https://twitter.com/Chiefs/status/1358530948170715138

===============

The Last in Line

Dio

We're a ship without a storm The cold without the warm Light inside the darkness that it needs, yeah We're a laugh without a tear The hope without the fear We are coming home

We're off to the witch We may never, never, never come home But the magic that we'll feel is worth a lifetime We're all born upon the cross We're the throw before the toss You can release yourself but the only way is down We don't come alone We are fire we are stone We're the hand that writes and quickly moves away

We'll know for the first time If we're evil or divine We're the last in line We're the last in line

Two eyes from the east It's the angel or the beast And the answer lies between the good and bad We search for the truth We could die upon the tooth But the thrill of just the chase is worth the pain

We'll know for the first time If we're evil or divine We're the last in line We're the last in line

We're off to the witch We may never, never, never come home But the magic that we'll feel is worth a lifetime We're all born upon the cross You know we're the throw before the toss You can release yourself but the only way you go is down

We'll know for the first time If we're evil or divine We're the last in line We're the last in line See how we shine

We're the last in We're the last in We're the last in We're the last in We're the last in We're the last in line

We're a ship without a storm We're the cold inside the warm We're a laugh without a tear We're the far without the near

We're the last in line We're the last in line We're the last in line See how we shine We're the last in line

Songwriters: Ronnie James Dio, Jimmy Bain, Vivian Patrick Campbell

For non-commercial use only.

Data from: Musixmatch

https://www.youtube.com/watch?v=360xvnsduDg

youtube

======================

5:52 pm:

I am going to explain a terror attack scenario here that is exemplary of how mass murder is done in the day time, at a shopping center, with many people all around, during regular business hours, inside the store, or outside, or anywhere:

This one is called: “Devour”.

The scenario requires a fairly large group of fake shoppers, who are terror soldiers working together to kill a single marked person at a store, that group of 5 to 8 soldiers also require that there is backup and support from other terror operatives at the store, typically some inventory carts loaded with merchandise is all that is required for the backup and there is also a “Clean up on Isle 5″ someone with a mop & bucket of water there ready to clean up a mess.

All it is, is to make sure the mark is occupied with reading a label, or is interested in something that is right in front of them. Then, that group of 5 to 8 terror soldiers moves in and surrounds the victim, while inventory carts are rolled into place to block any one from seeing what is about to happen.

That group uses a sword to kill the victim, they all have a backpack, typically one of them will have a big blanket of a pancho sort of clothing. They cut the victim up, four limbs, head, torso. Each one of the group quickly and smoothly puts the body parts into the backpacks, and that pancho is used to wrap the victims torso, and they all walk away together in a huddled group, same as they were before the attack happened. It takes about 90 seconds to do once the victim is surrounded by the group.

I have seen that happen at the Walmart self checkout and in the school supplies aisles at times when the store was crowded with people.

One thing that happens, is the victim is alone, but when that attack group swarms around the victim, the group plays as though the victim is part of their group, so, anything that the victim says, is considered to have been directed at the group that is devouring them.

I think they also call that one: “no you see it, now you don‘t” because it’s as if the victim vanished into thin air if you happen to see that, and were paying attention to details.

In the day time, during regular business hours at crowded store, Used to happen often, now, there are no more victims to devour like that.

Please send help to Oregon. US Military is required, bring your own hospital.

===========================

8:28 pm:

Local conditions are cold, no wind, clear sky,

There have been terror soldiers hovering around my house all day. One was on the front porch early at about noon, others have been in the back part of 520 Jackpine at intervals. The one on the porch knocked over small statue I have near the door. They have been blowing the gas that makes my leg swell up, and makes the rash worse today.

There are yet more different terror soldiers at the Offensive Monroe Trailer, and those are part of a new different group who are at Chartrand 376 Jackpine.

I think one of the terror soldiers who was killed last night was one named Gene, or Genie.

The Chapman county courts terror cell is still dark, no lights on at all.

Freeberg terror air force “Air Support” terror cell is showing signs of a new occupant there, I suspect there are people from In-n-Out Burger terror cell there judging by activity I witnessed at the In-n-Out Burger on Wednesday afternoon.

Strong terror cell is always active, no one really lives there any more, it’s like the 520 Jackpine address, and the “Donkey George” terror cell next to Chapman‘s, they have all been converted to attack houses, previous terror cell occupants all are dead, been dead, so, other terror cells come, stay at those residences, and make arrangements to do an attack at my house, Chartrand is also the same way. I suspect nearly all of the Jackpine residences have all been converted to what is called a “SAG House”, is a house that is used mostly for SAGClubMed Junket activities, a hide-a-way sort of place where SAG members can stay while on Heroin Mass Murder Fest, mostly in the spring and summer months. These people at the local Jackpine and Russell Road properties are all Canadian terror soldiers though, I don‘t see any evidence of any SAG there the past week or two, maybe longer. There is one exception, where I did notice some SAG Musician style activity this week, it’s difficult to know who is who when they all where disguises and electronic camouflage suits.

no one cares enough to send any help, so it does not matter. If there were dark skinned people with beards and back packs, all of the worlds militaries would be here to kill them, but that is not the brand of terror that is here. These terrorists are white people from Hollywood and from Canada, no one is interested in that brand of murderous treasonous bastards.

0 notes

pravasichhokro · 3 years

Text

Japan & Japanese through my eyes........

I wish to give you a brief background of my association with Japan & Japanese. It began in 1975 when I worked for Engineers India Ltd. in New Delhi. I was part of a project management team to look after a petrochemical project called “Acrylic Fiber” at IPCL, Baroda. The process technology came from Asahi Chemical and Front-End Engineering was carried out by Kobe Steel. They had deputed a full time Japanese at EIL office.

Next association was in 1980-81 when I took a field engineer job withToyo Engineering at Basra, Iraq. For about 15 months, my immediate bosses were Japanese, though there were many Indians on site.

My close and strong association was from 1984 to 87 when I was a project manager and managed a collaboration with Chiyoda Corporation of Japan to execute an EPC project at NFL, Guna.

I along with my family moved to Yokohama, as Chiyoda Corp. offered me a direct employment. My office and my daughter’s school were also in Yokohama.

I again had a chance to work with Japanese when Chiyoda set up a joint venture with L&T called L&T –Chiyoda at Baroda in the 90’s.

Lastly, I was asked to manage Chiyoda’s liaison office at Bangalore for two years in 2012-14.

I will segregate my observations in two parts- one from the people and another from the country. Most people know of the punctuality of Japanese and discipline at workplace Hence, I will not dwell on these.

Most Japanese are concerned and sensitive of the discomfort or needs of fellow person. You can see that a Japanese not only picks up used plates and tray with trash in a McDonald’s but also wipes the table. You observe that a mother carries two types of napkins – one wet and another dry- when she takes her kid(s) out to play in the public garden. She cleans the child’s dirty hands with wet and then with clean napkin so that it does not dirty the rails or seats of the garden. Even in 90’s I saw Japanese wearing mask when they suffered from cough and cold. It was a common sight to see the dog owner carrying a paper bag and some broom to pick up poop.

Japanese people do not commit petty crimes or cheat which makes life so stress free and safe. My wife used to leave the apartment door open to go shopping nearby for 30 to 45 minutes. She learnt of this practice from neighbours. Initially we used to keep the money in our palm and the shop keeper would take the appropriate amount. All the shops-small or big – always charged us the VAT, whether we wanted a receipt of not. First time in my life I was offered a printed receipt of fare charged by a metered taxi without asking.

Japanese introduced us to see the beauty in the nature. The first time in our life we went to the mountains to see the autumn colours. There were conducted tours for local people to come to the mountains and soak in the beauty of the shades of colours from green to golden. We were also witness to the fire which is light up to dry leaves/grass on the mountain sides. The fire is light and controlled to spread in artistic way and you watch it from across the valley. Another experience was of hot (sulfur) springs in the mountains near Tokyo (Hakone). Our company guesthouse had a huge pond kind of hot water spot where natural spring was brought in. We soaked in this pond in the Japanese way-no clothes and separate areas for women and men. In five-star resorts, one could soak in the hot spring and sip from a glass of beer.

Japanese were also very health conscious. Our office had an indoor all weather Olympic size swimming pool and full-fledged gym with an instructor. Some of my colleagues were using this during lunch time before eating lunch. I used the facility on weekends. I went to a gym first time in my life and swam when there was almost zero-degree centigrade ambient temperature outside.

Japanese also retained some of “Indian” habits which may have reached them through Buddhism. Outdoor footwear cannot be used indoor whether in the residence or Japanese restaurants. We must leave outdoor footwear at the door and use in house slippers to go in. Most Japanese prefer to sit cross legged and ladies in Vajrasan. They do not shake hands or hug when the meet but bow and greet. Most prefer to sleep on the ground on a mattress rather than a western bed.

Japanese also have found ways to de-stress after an incredibly stressful office or factory workday. Karaoke bars are popular and now world famous. The normal bars without karaoke are also popular. They had huge halls with “ball” machines when they play a special game with stakes to lose or win, like what we played as a child. They also enjoy comics and there are comics to entertain all age groups.

Japan as a country is different from India. India is heterogeneous whereas Japan was homogeneous. This one feature made a lot of difference. They had only ten public holidays every year. Japanese was the main language for locals and it was developed to ensure that students get the latest information also. Japanese language also brings a very peculiar character to the people. The language has three alphabets-Hiragana, Katakana and Kanji. Kanji has no letters but only Chinese characters/pictures. There are over few thousand kanjis and a child takes more than 8 yrs to know them all though only a few hundred Kanji is extensively used. To write Kanji one must be precise and take care of the different strokes. This focus on details and accuracy is reflected in everything they do in my opinion.

The police in Japan were extremely helpful and friendly. On two occasions I got their help. Once I was lost in the central Tokyo area and I went to the police station. The policeman there came with me to show me the address. On another occasion, my family and me went to meet my friend but my Casio watch, which had his telephone no. ran out of battery and I was lost. I again went to police station near the rail station. He permitted to call my office to find out the contact no. of my friend (office colleague) but the office security refused. Then he opened the area map with names of the residents, and we located two Tanaka-san. I dialed the first one and fortunately he was my friend. In India, such help was unthinkable, going to the Police station for common man for help is a far cry!

I came across some interesting leave/holidays rule. Most Japanese joined a company for a lifetime and the company was expected to take care of the individual. After about 20 yrs. of service (mid-way I guess) the employee get paid leave (about 6 weeks) and a huge payment (app. one year salary). He is expected to enjoy with his family and many of colleagues went to Europe, USA or Latin America for two to three weeks with family.

I was happily surprised that most school students including my daughter walked to the school. My daughter walked about 20 minutes each way, there were volunteers on the route to guide the school kids. No school bus or parents driving to drop or pick-up kids.

For common people, the basic unwritten rule was- provide goods and services which are high quality and reliable. All public phones (as the world was not exposed to internet or mobile phones at the time) were in working order with coins or prepaid cards for both domestic and international calls. Such phones were plenty and located at all convenient locations like rail stations, supermarkets and including lift lobbies in office buildings. ATM rooms of banks had ATM machines for withdrawal and transfer facility. There were two other machines-passbook printing and change dispensing. ATM rooms were open 24x7. Japan was most known for vending machines- variety and exceptionally reliable. Vending machines would dispense soft drinks, beer, hot and cold coffee, tea, small snacks packets etc. These machines would not be out of stock and returned change.

Japan acts in unison for trade/commerce without side world. Immediately after WWII, their economy was shattered but soon they got on their feet. The five trade houses –Sumitomo, Mitsui, Marubeni, C Itoh and Mitsubishi- were the marketing agents for both import and export. The manufacturers were concentrating on design, engineering, and quality products. This brought down costs. The trade houses would bring enquiries and orders. They will also take care of payments. Each manufacturer will join a trade house so that there is no competition among the trade houses.

As a country, I saw Japan converting research output in other countries to application/products for common use. The classic example was digital watch from Texas Instrument to Casio. Another could be Video players. Even some collaborations were made successful and eventually did better than the collaborators. The classic example is of Toyota Car Co which had started with GM collaboration 1950s.

In all the efforts of private sector in commerce the Govt played a particularly important and positive role. The banks were ready to help exporters/vendors with five-month credit as L/C or other kind of payments after shipment may take 3 months.

I hope you like what I have scribbled above as much as I loved it writing.

#japan #japanese #yokohama #casiooriginal

0 notes

wahid007posts · 3 years

Text

Molded Pulp Packaging Market to exceed USD 4.4 Billion by 2024

The report "Molded Pulp Packaging Market by Source Type (Wood & Non-wood), Molded Type (Thick Wall, Transfer, Thermoformed, Processed), Product (Trays, Bowls, Cups, Plates, Clamshells), End Use, and Region - Global Forecast to 2024" The molded pulp packaging market size is projected to grow from USD 3.5 billion in 2019 to reach USD 4.4 billion by 2024, at a CAGR of 4.4%.

Get PDF brochure of the report: https://www.marketsandmarkets.com/pdfdownloadNew.asp?id=36997090

105 market data Tables and 35 Figures spread through 138 Pages and in-depth TOC on "Molded Pulp Packaging Market”

The transfer molded segment, by molded type, is projected to dominate the molded pulp packaging market throughout 2024

The bowls segment, by product type, to register the highest growth in the molded pulp packaging market during the forecast period

The electronics segment, by end-use industry, to register the highest growth in the molded pulp packaging market during the forecast period

https://www.prnewswire.com/news-releases/molded-pulp-packaging-market-worth-4-4-billion-by-2024--exclusive-report-by-marketsandmarkets-300884611.html

The Asia Pacific molded pulp packaging market is projected to register the highest CAGR during the forecast period

Key Market Players

Early buyers will receive 10% free customization on this report.

Don't miss out on business opportunities in Molded Pulp Packaging Market.

Speak to Our Analyst and gain crucial industry insights that will help your business grow.

https://www.marketsandmarkets.com/speaktoanalystNew.asp?id=36997090

About MarketsandMarkets

Contact: Mr. Ashish Mehra MarketsandMarkets™ INC. 630 Dundee Road Suite 430 Northbrook, IL 60062 USA: 1-888-600-6441 [email protected]

#Molded Pulp Packaging #Molded pulp packaging market #Molded pulp packaging industry #Molded pulp packaging companies

0 notes

esglatestmarketnews · 3 years

Text

Aerospace Composites Market Competitive Analysis and Forecast Report 2020

January 28, 2021: The aerospace composites market is expected to witness market growth at a CAGR of above 4% over the forecast period from 2015 to 2020 on account of continuing market thrust in Asia Pacific regions and Latin America with budding low-cost carriers. Strong demand is anticipated to prevail in North America and European Markets in commercial as well as defence sector. The Middle East airlines industry is growing with lifestyle shifts and business growth in the region coupled with introduction of low-cost airlines has led to a boost in overall airlines market.

Aerospace composites are formed by combining two or more basic materials to obtain superior characteristics of binding, reinforcement, temperature resistance and flexibility. Composite matrices can be metallic, ceramic or polymeric manufactured from fibres that can be carbon, glass and natural. These fibres are to be bound together by resins such as epoxies, polyurethanes, phenol and unsaturated polyesters and vinyl esters. Reinforcement decides properties of the composite while matrix holds the structure in place.

Key factors supporting the growth of aerospace composites are their applications in aircraft interiors such as ceiling panels, galleys, cabin linings, cargo floor panels, ceiling panels, overhead compartments, lavoratories, partitions, and bars. Aerospace composites are also used in exterior equipment such as landing gear, doors, winglets, fins, and trailing edges.

With abundant availability and technological advancements of composites, it is now possible to manufacture light weight aircraft components on a mass scale leading to improved fuel efficiency. Composites also provide added advantage of ease of design and production over their metal counterparts.

Request a Free Sample Copy of this Report @ https://www.millioninsights.com/industry-reports/aerospace-composites-market/request-sample

Aerospace composites are highly cost effective on account of parts integration, reduced manufacturing and assembly time and consequent labour expenses, making significant number of drag inducing fasteners redundant. Maintenance frequency is reduced as composites are corrosion free, better strength retention and improved power to mass ratio leading to reduced operating costs, improved operating efficiency and performance.

Factors restraining the growth of composites are regulatory rules by Environmental Protection Agencies (EPA) and ACARE (Advisory Council for aircraft and Innovation and Research in Europe). Specifications regarding the smoke emitted during production, toxicity of the chemicals involved and fire resistance levels of these components are tested for compliance. Also the pricing of the materials is high currently as the technology is in a development phase. The recyclability is low in these substances which may hinder the upward trend in the near future.

The market is characterized by dominance of few companies, which raises entry barriers for Tier 1 and tier 2 companies. Component manufacturers have to continually invest in increased productivity with challenges due to dynamic technology modifications. The industry is highly fluctuating and future predictions are uncertain because highly competitive landscape in the airlines industry with ongoing steep price wars.

Aerospace composites industry presents opportunities owing to continuous technological advancements in component and structural application in materials as well as mainframe. Businesses are increasingly outsourced to Tier 1 and 2 manufacturing partners that possess specialised skills in cost effective manufacturing, these companies have in place advanced manufacturing processes such as tape laying, infusion moulding and fibre placement. Secondary structures and flight control surfaces production is also being outsourced throughout the industry and provide numerous opportunities.

The market can be segmented according to product into fiber reinforced composites, carbon fiber reinforced composites, aramid composites ,ceramic matrix and metal matrix composites .Glass fiber enforced composites are expected to generate high demand owing to characters such as light weight, increased fuel efficiency, high corrosion resistance and short maintenance cycles.

Browse Full Research Report @ https://www.millioninsights.com/industry-reports/aerospace-composites-market

Carbon fiber reinforced polymer (CFRP) structures are tougher than aluminium counterparts of the same length ensuring more passive safety and greater resistance to impact damage. Ceramic Matrix composites are used in manufacturing of engines as they can sustain high temperatures and are thus fire resistant and durable.

Application-wise, the market can be segmented into commercial aircrafts, business and general aviation, defence aircrafts, helicopters, and spacecrafts. Commercial aircrafts are expected to emerge as one of the key application domains. Growth in commercial aircrafts is presumed to be fuelled by military applications given the rising concern over security issues, which translates into increased spending on capacity building. Business and general aviation are expected to witness increased use of composites because of the increased demand for business jets, single aisle and twin aisle aircraft.

Key regional markets include developed nations such as the U.S., Canada and European countries such as France, Germany and UK. Asia Pacific countries such as are China, India and Singapore are witnessing considerable demand, which can be attributed to the combination of the swift growth in composite processing and need for aircraft production at higher profitability.

Key players that operate in the industry are Cytec Industries Inc., Hexcel Corporation, E.I. Du Pont De Nemours, Toray industries, SGL Group, Owens Corning .The players are focusing on expansion as a key objective in order to boost the market share and penetration in emerging economies. Other strategies in the sector include new product development, partnerships, joint ventures, technology agreements and collaborations for research purposes.

Get in touch At Million Insights, we work with the aim to reach the highest levels of customer satisfaction. Our representatives strive to understand diverse client requirements and cater to the same with the most innovative and functional solutions. Contact Person:

Ryan Manuel

Research Support Specialist, USA

Email: [email protected]

0 notes

alexking123us · 3 years

Text

Automotive Lightweight Material Market Prospects Examined for the Period until 2027

Facto Market Insights published a title on “Automotive Lightweight Material Market – 2020-2027”, to its collection. The study on the automotive lightweight material market defines the analysis of all the segments, along with the market sizing, year-over-year growth analysis and structure of the industry. The research report also includes the analysis of geographical manufacturers & new market players, covering all the data & information suitable for the clients to make strategic business decisions.

Get Free Sample Report at https://www.factomarketinsights.com/sample/686

The market research report provides detailed analysis of market drivers, challenges, opportunity analysis, and trends, along with various key insights into the automotive lightweight material market research report. The study on automotive lightweight material market demonstrates the important aspects that are envisioned to shape the growth of the global market over the forecast period. In addition, the report also covers the facts & figures related to the macroeconomic trends that are anticipated to impact the growth of the market.

Additionally, the study covers the PESTLE analysis and porter’s five forces analysis which demonstrates the five forces including buyers bargaining power, suppliers bargaining power, the threat of new entrants, the threat of substitutes, and degree of competition in the automotive lightweight material market. The market research report represents the framework of porter's five forces analysis explains the method for examining the competition of the business covering the structure of industry & the level of competition in the market.

Moreover, the study also covers the section of competitive landscape of the automotive lightweight material market including the market share & positioning of all the major & prominent players in the market. The competitive landscape analysis provides in-depth analysis of the company’s business and performance including company overview, recent investments by top players, financial information of market players, business strategy, revenue breakup by segment and by geography, SWOT Analysis, key product offering, marketing and distribution strategies, new product development. The section of recent news & development has been added to the market research report which covers the latest information that are related with the market covering the product launch, innovation, acquisition, expansion, technology development, research & development activities, and other market activities.

Impact of COVID-19 Disease on Automotive Lightweight Material Market:

The research report on automotive lightweight material market explains the impact of coronavirus disease (COVID-19), covering the following points:

- How the coronavirus pandemic is going to impact the overall 5G market in the upcoming years.

- Identifying the issues & disruptions caused by COVID-19on the basis of region & countries on the market

- What strategies are being adopted by the manufacturers to survive such pandemic in the near future.

For Full Report with TOC Visit at https://www.factomarketinsights.com/report/686/automotive-lightweight-material-market

Global Automotive Lightweight Material Market Segmentation

The research offers a comprehensive analysis of global automotive lightweight material market with respect to following sub-markets:

Automotive Lightweight Material Market, by Material Type:

Steel

Metals

HSS

AHSS & UHSS

Composites

Aluminium

Magnesium

Titanium

Elastomers

Polymers

Carbon

Aramid & Fiber Glass

ABS

Polycarbonate

Polyamides

Others

Automotive Lightweight Material Market, by Vehicle Type:

Passenger Cars

LCV

HCV

Automotive Lightweight Material Market, by Application:

Engine & Mechanical

Interior

Exterior & Structural

HVAC & Electrical

By Region:

The geographies are fragmented into the country and regional groupings:

- North America (U.S. & Canada)

- Latin America (Brazil, Mexico, Colombia, Argentina, Peru, Chile, Cuba, and Rest of Latin America)

- Europe (Germany, United Kingdom, France, Italy, Spain, Russia, Belgium, Netherlands, Luxembourg, Poland, Romania, Czech Republic, Portugal, Switzerland, Denmark, Finland, Sweden, and Rest of Europe)

- Asia Pacific (China, India, Japan, South Korea, Indonesia, Taiwan, Australia, New Zealand, Philippines, Thailand, Malaysia, Cambodia, Hong Kong, Singapore, Laos, and Rest of Asia Pacific)

- Middle East & Africa (GCC (Saudi Arabia, UAE, Bahrain, Kuwait, Qatar, Oman), North Africa, South Africa, and Rest of Middle East & Africa)

Global Automotive Lightweight Material Market: Competitive Landscape

The report also highlights the competitive landscape of the global automotive lightweight material market, market share and positioning of all the major players in the industry. The competitive landscape analysis provides detailed strategic analysis of the company’s business and performance such as company overview, financial information, revenue breakup by segment and by geography, SWOT Analysis, key facts, business strategy, key product offerings, marketing and distribution strategies, new product development, recent news (acquisition, expansion, technology development, research & development and other market activities).

The market research report covers the section of competitive landscape in the Automotive Lightweight Material market, including profiles of various major & niche key market players:

Tata Steel Ltd

ThyssenKrupp AG

United States Steel Corporation

Nucor Corp

ArcelorMittal SA.

Ak Steel Holding Corp

Baoshan Iron & Steel Co., Ltd

SSAB AB

POSCO

Solvay

For any Inquiry before buying this report visit at https://www.factomarketinsights.com/enquiry/686

About Us:

Facto Market Insights is one of the leading providers of market intelligence products and services. We offer reports on over 10+ industries and update our collection daily which helps our clients to access database of expert market insights on global industries, companies, products, and trends.

Our in-house research experts have a wealth of knowledge in their respective domains. With Facto Market Research, you always have the choice of getting customized report free of cost (upto 10%). Our support team will help you customize the report and scope as per your business needs. This ensures that you are making the right purchase decision.

Our clients list includes various Fortune 500 companies and leading advisory firms.

Facto Market Insights

90 State Street, Albany,

New York, USA 12207

+1 (518) 300-1215

Email:[email protected]

Website: www.factomarketinsights.com

#Automotive Lightweight Material Market Forecast Automotive Lightweight Material Market Size Automotive Lightweight Material Market Trends Au

0 notes