thiphrisitys - Tumblr blog

thiphrisitys · 2 years

Text

How Long do Asbestos Roofs Last? (UK)

How Long do Asbestos Roofs Last?

Asbestos roofs’ lifespan depends on the thickness of the material. If you opt for a thin sheet, you can expect the roof to last for around 30 years. The lifespan can go over 50 years more with a thicker sheet. However, concerns over its impact on human health have led to many countries banning it from being used in buildings and other structures.

What is an Asbestos Roof?

An asbestos roof is made up of sheets of asbestos that are bonded together and then covered by tar paper or felt. It was used extensively in construction as one of the most popular roofing materials until it was banned in the UK in the 1980s. In most cases, people who work on these roofs will be wearing protective clothing such as gloves and boots. However, if they are not, there is still a risk of developing mesothelioma and other types of cancer.

Types of Asbestos

There are two main types of asbestos: chrysotile and amphibole. They both have different properties. Chrysotile is considered to be less harmful than amphibole. Both types of asbestos were commonly used in building materials before their use was restricted. Other types include blue asbestos and brown asbestos and white asbestos.

The Use of Asbestos in Construction

Before the 1980s, asbestos was widely used in construction. Its popularity grew because it provided insulation that could withstand extreme temperatures. It also helped keep water out of the structure of the building. However, after studies showed that it caused cancer, it became illegal to use in the United Kingdom. This has since been adopted across Europe and North America.

How Safe is Asbestos Roofing?

The main problem with this type of roof is that it contains asbestos that poses health risks. This means that it causes serious health hazards when exposed to the dust created during its installation and removal. Asbestos can also pose a threat when it gets into the air through cracks and holes in the roof. Therefore, it is important to check your roof regularly to ensure that it is safe. You should also make sure that any workers working on your roof wear protective clothing and use masks while doing so.

When are Householders Likely to be Exposed to Asbestos?

You are likely to come across asbestos-containing materials at home. These include floor tiles, insulation, ceiling tiles, pipes, water tanks, fireplaces, wall panels, window frames, doors and siding. There are many ways that you could be exposed to asbestos dust. For example, if you live near a building site where asbestos products were being installed, you might breathe in the dust. Alternatively, if you have ever worked in a factory that produced asbestos products, you could inhale the dust or asbestos fibers from their production process.

Precautions to Take with Asbestos Roofing

If you suspect that your house has asbestos roofing, you need to contact a specialist company that deals with hazardous waste. They will be able to advise you on what to do next. One option would be to remove the roof completely and dispose of it safely. Another option would be to seal off the area where the roof is located. This way, it won’t create a hazard for anyone living nearby. Factory workers should use sufficient protective equipment to reduce their risk of exposure to asbestos fibres.

FAQs

Can I Sell My Home With An Asbestos Roof?

If you want to sell your house, you need to know whether it has an asbestos roof. If it does, you will need to remove it before putting it on the market. Otherwise, you could face legal action if someone later develops an illness due to exposure to asbestos.

What is the life expectancy of asbestos shingles?

Asbestos shingles typically last between 30 and 50 years.

Can an asbestos roof be repaired?

Yes, but only if you hire a licensed professional contractor to carry out the job. The best way to deal with asbestos roofing is to get rid of it entirely.

Can I remove asbestos roofing myself?

No, as it is illegal for you to do so without the correct safety equipment and training. It’s also dangerous because there is a chance that you could become seriously ill.

Do I need to hire a professional roofing contractor?

It depends on how much work needs to be done. If you’re going to replace just one section of the roof, then it may not be necessary to call a professional.

See our previous blog post here: How Long Does a Thatched Roof Last?

youtube

source https://fortisfarnboroughroofing.co.uk/blog/how-long-do-asbestos-roofs-last-uk/ from Fortis Roofing Farnborough https://fortisfarnboroughroofing.blogspot.com/2022/06/how-long-do-asbestos-roofs-last-uk.html

0 notes

thiphrisitys · 2 years

Text

How Long Does a Thatched Roof Last? (UK)

How Long Does a Thatched Roof Last?

How long do thatched roofs last? How long will my thatch roof last? What is the lifespan of a thatch roof? Is it really possible to get a new thatch roof for free? Does your thatch roof need replacing? Fortis Roofing Farnborough have answers to all these questions and more.

Water reed thatch lasts for approximately 30 years; combed wheat lasts for approximately 30 years, and straw lasts for approximately 20 years. While it may be true that thatched roofs can last up to 60 years when regularly maintained, they will eventually need replacing.

A thatched roof usually lasts for several decades if its construction is good enough and maintenance is regular. It may last even longer if made from certain materials. Rainfall is another important consideration. If there’s too much rain, some roofing materials may get damaged by water-logging. Also, if the roof has been exposed for a long time without any maintenance, then its lifespan could be reduced significantly.

What is Thatch Made of?

A thatched roof is usually made of three main materials: water reed, combed wheat reed, and long straw. There are some regional differences in the types of each, as well as their qualities and availability. The use of long straw has decreased over the years as farmers prefer shorter varieties of wheat because it is easier to grow and harvest. Thatching is no longer a by-product of agriculture but is now grown exclusively for that purpose.

How is Thatched Roof Built?

In its original form, thatching was applied directly onto the roof timbers. Attached to the timbers at angles of 20 degrees, they’re stacked one atop another until the roof edge forms a slant of 40–50 degrees. As the slope gets steeper, so too does the drainage get better. In addition, the steeper the slope, the greater the volume of rainwater that needs to flow off the roof; therefore, the roof pitch must be chosen carefully to balance these factors.

A thatched roof is waterproof if its layers are tightly bound together so that no air pockets exist between them. Since the dry thatching has a longer lifespan than the rest of the grass, it’s possible to remove the top layer every 10 years or so but keep the bottom layers intact. It can save a lot of time in the long term.

Advantages of Thatched Roofs

Compared to other types of roofing material like slate and tile roofs, thatched roofing offers several advantages including lower cost, easier installation, fewer maintenance requirements, and better ventilation. Some of the other benefits include:

Thatch roofs are naturally breathable, preventing rot.

They have good insulating properties since there is a lot of trapped air in the bundles and hollow reeds, so there is no need to insulate the loft.

In addition to being cool in summer, thatched roofs have low heat conductivity

The material is naturally sourced so they are more environmentally friendly.

In addition, they are visually stunning.

Costs are reduced because gutters and drainpipes are not needed

Disadvantages of Thatched Roofs

Thatched roofing is not suitable for all types of climate. For example, it cannot withstand strong winds. It also requires a lot of maintenance. However, with proper care and regular maintenance, thatched roofs can last for many years and enhance the beauty of your property. Some other drawbacks include:

These roofs can be a fire hazard.

They need to be maintained regularly because of rotting that may occur naturally over time.

The roof pitch should be adequate to prevent accumulation of snow.

Thatched Roof Installation Cost

To know the cost of thatched roof installation, you have to factor in the material costs as well as the labour costs. In the UK, the price averages about £700 per square foot. Although, this may vary based on where you live. Also, to know the exact cost, it is recommended to reach out to a skilled thatcher in your locality.

FAQs

How often should a thatched roof be replaced?

A thatched roof should be cleaned once a year and re-tightened. It is generally recommended to install a new roof thatch ridge every 10 – 15 years. The lifespan of the coatwork will differ depending on the material used.

Is a thatched roof expensive to maintain?

Thatched roofs are cheaper to maintain, but you’ll be paying more for your buildings or contents insurance because they pose a bigger fire risk than slate roofs. Thatch roof repairing can be difficult and sometimes more frequent than most other roof types.. It is not recommended to use thatch roofs on commercial roofing projects.

Do thatch roofs leak?

Yes, thatched roofs do leak, especially when heavy rainfall occurs. This is why it’s important to check your roof thoroughly before any rainfalls. If you notice water leaking from the eaves or downspouts, then call a professional immediately.

See our previous post here: How to Build a Pitched Roof

youtube

source https://fortisfarnboroughroofing.co.uk/blog/how-long-does-a-thatched-roof-last-uk/ from Fortis Roofing Farnborough https://fortisfarnboroughroofing.blogspot.com/2022/06/how-long-does-thatched-roof-last-uk.html

0 notes

thiphrisitys · 2 years

Text

How to Build a Pitched Roof? (UK)

How to Build a Pitched Roof?

If you are planning to build a pitched roof, you may have a lot of questions and concerns about going about it. In this blog, our roofing experts will take you through the process of building a pitched roof and also answer all your burning questions about it.

What is a Pitched Roof?

A pitched roof is one that has sloping sides. The slope can be as steep as 45 degrees or as shallow as 3 degrees. This type of roofing is used for commercial properties, warehouses, factories, schools, churches, and many other types of structures. It is usually made out of metal or wood shingles.

Why should I use a pitched roof?

Pitched roofs are very durable and long-lasting. They also provide great insulation from the elements. A pitched roof can last up to 50 years if maintained properly. If you want to save money on energy bills, then a pitched roof is definitely the way to go. You can also get a good deal when you buy a new house with a pitched roof.

What are the Different Types of Pitched Roof?

There are three different types of pitched roofs: gable, hip, and gambrel. Each type has its own advantages and disadvantages. Let us look at each in detail.

Mono-pitch roof

The mono-pitch roof is the most common type of roof found in homes and businesses today. It consists of only one pitch. There is no second pitch. A single layer of material is placed on top of the rafters. This means that there is no ridgepole. The advantage of using a mono-pitch roof over a double-pitch roof is that it is cheaper.

Double-Pitch Roof

The double-pitch roof has two pitches. One side slopes up while the other side slopes down. This gives the roof an overall shape similar to the letter “C”. It is often seen in old houses.

Gable Roof

This type of roof is the most popular among homeowners. It is a combination of a mono-pitch and a double-pitch. It has a peak that extends above the roofline.

Hip Roof

Hip roofs are not commonly used in residential settings because they require a high degree of skill and expertise. However, they are still used for commercial purposes. The advantage of a hip roof is that it provides better insulation than a mono-pitch or double-pitch roof.

Gambrel Roof

Gambrel roofs are the least common type of roof. They are used mostly by farmers. They are also known as barn roofs.

Couple roof

A couple roof is a combination of a gable roof and a hip roof. The gable roof is located on the front part of the house. The hip roof is located in the back part of the house. Both roofs are connected together by a ridgepole.

Tented Roof

Tented roofs are used mainly in commercial settings. They are also called tent roofs. They are made from metal sheets.

How to Build a Pitched Roof

It is no easy task to build a pitched roof. Before you begin any work, you should make all the necessary preparations. To begin with, you should make sure that your roof can support a pitched roof. Are there enough beams in your roof structure? Does the roof frame have structural integrity? You can begin constructing once you answer “yes” to these questions.

You will need to calculate your roof pitch once you’ve determined whether your property can accommodate a pitched roof. You can think of the pitch of your roof as an angle or as X:12 ratio, which describes the slope of your roof. Most low-pitched roofs are 2-3:12, while steeper pitches are up to 6:12.

Mount the trusses on the roof. Space your trusses apart according to your calculations after lifting them onto the roof. Depending on your roof, there is no specific distance for taking this measurement. The distance between roof trusses is typically between 30 and 40 cm, but can even go as high as 60 cm.

Install braces. Place a 2″x6″ board in the middle of your back wall at an approximately 16-foot height. Similarly sized pieces can then be nailed 6 feet either side of the first piece. Repeat the process on the other side of the roof. Don’t worry too much about how they look – braces are only temporary!

Attach the roof trusses. You should attach the first truss to the end truss slightly larger than its length. Fit it tightly to the central brace if it projects out slightly.

Do the same on the other side of the roof. To attach the timber trusses to the temporary brace planks along the length of the roof, create a truss that spans the length of it. After that, you can keep adding trusses at set intervals

As with the temporary bracing, you can install the permanent ones at either end of your roof. To ensure the firm anchoring of all roof trusses, be sure to adhere to the manufacturer’s instructions.

Sheathing can then be added beginning at the bottom corner and moving across the roof horizontally. Plywood is most commonly used for sheathing, but other materials can be used as well. Every joint must be over a roof truss, and there should be a small gap between each sheet. The nails should be spaced around six inches apart. Repeat the process for the second row.

Pitch Roof vs Flat or Sloped Roof – Which one is better?

Different roof types serve different purposes. Picking one depends on what you need it for. For example, if you want the most space in your attic, a pitched roof will serve better than a flat or sloped roof. A flat roof does not provide much in the way of architectural interest, so it is best suited for buildings with a more modern, industrial feel. A sloped roof is more traditional and provides more opportunities to add architectural interest.

How Do I Choose the Right Roof?

When choosing a roof, there are several things to consider. First, make sure that the roof meets building code requirements. Second, check if the roof is suitable for the climate where you live. Third, look into whether the roof needs maintenance. If so, what kind of maintenance does it require? Finally, think about how much money you want to spend on the project.

FAQs

Why Should I Go With a Pitched Roof?

Pitched roofs are very durable. They are strong enough to withstand heavy winds and snow loads. They are also easy to maintain. You don’t need any special tools to repair them. If you want to know more about why you should choose a pitched roof over a flat roof, read on!

Which is a better flat roof or pitched roof?

The advantages of a pitched roof over a flat roof are greater stability and drainage in areas that receive a lot of rain. Nevertheless, flat roofs can be a great option if you live in an area that receives little rainfall.

Is a pitched roof cheaper to build than a flat roof?

Flat roofs are much cheaper to build than pitched roofs. In the long term, pitched roofs may be more affordable than flat roofs because pitched roofs are less prone to moisture damage, and flat roofs are more expensive to repair.

See our previous post here: How Long do Conservatory Roofs Last?

youtube

source https://fortisfarnboroughroofing.co.uk/blog/how-to-build-a-pitched-roof-uk/ from Fortis Roofing Farnborough https://fortisfarnboroughroofing.blogspot.com/2022/06/how-to-build-pitched-roof-uk.html

0 notes

thiphrisitys · 2 years

Text

How Long do Conservatory Roofs Last? UK

How Long do Conservatory Roofs Last?

Info provided by Fortis Roofing Farnborough:

Typically, a solid conservatory roof lasts around 25 years but can last for much longer in many cases. The reason behind this is that solid roofing like tiled conservatory roofs is much sturdier and durable, fending off bad weather better. With little maintenance required, costs are reduced significantly, and damage occurring during repairs is far less common since it is rarely needed. Whereas, glass and uPVC conservatory roofs can last 10 to 15 years only.

In Britain, 18% of homes have glass extensions, according to a 2013 survey. The popularity of conservatories is not surprising.

There are a number of factors that can affect a conservatory roof’s lifespan. Some of them are its positioning, the climate, the quality of work, and, the materials used.

Choosing a conservatory roofing material can be an overwhelming task. There are many different materials available and it’s important to make sure you know what your options are before making any decisions. Here we look at some of the most popular types of conservatory roofs and how they compare.

Types of Conservatory Roofs

Tiles Conservatory Roof: Tiles are very easy to install and come with a wide range of colours and designs. They are also resistant to water penetration, which means they don’t rot or crack easily. However, tiles are prone to chipping, so if you live in a windy area then choose a tiled conservatory roof instead.

Slate Conservatory Roof: Slate is a hard-wearing and attractive choice of roofing material. It comes in various shades and patterns, giving you plenty of design choices. This makes slate ideal for both modern and traditional styles. It is also highly resistant to moisture, meaning it won’t rot or corrode over time.

Metal Conservatory Roof: Metal roofs are a great option for those who want something sleek and stylish. They come in a variety of shapes and sizes and are extremely durable. They are also fireproof, meaning they will not burn up when exposed to flames.

Timber Conservatory Roof: Wood is another classic choice of conservatory roofing material. It is very aesthetically pleasing and has been used for hundreds of years. It is also very strong and durable, so it can withstand heavy winds and snow loads. But wood does have one major drawback – it requires regular maintenance and upkeep. If you’re looking for a more natural look, then consider using wood as part of your conservatory roofing scheme.

Glass Conservatory Roof: Glass is by far the easiest conservatory roofing material to install. It is lightweight and flexible, making it perfect for all sorts of climates. It is also extremely durable, so it should last for decades. It is also fireproof, so it won’t melt or catch alight when exposed to flames. A glass conservatory roof is aesthetically pleasing and offers a magnificent view of the sky.

Polycarbonate Conservatory Roof: In the 1980s and 90s, conservatories were generally made up of polycarbonate roofs. Polycarbonate roof panels tend to decay and warp leading to leaks and damage.

Aluminium Conservatory: Aluminium is a great alternative to glass because it’s cheaper, but still looks fantastic. It is also incredibly light, so it doesn’t weigh down your conservatory too much. That’s why despite of the high costs, glass roofs are preferred over polycarbonate.

Why Do I Need a Conservatory Roof?

A conservatory roof is one of the best ways to add value to your home. It provides a great space where you can enjoy the outdoors without having to go outside. A conservatory roof also helps to keep out the elements, keeping your house warmer in winter and cooler in summer.

The benefits of a conservatory roof don’t stop there though. They also provide added privacy, which is perfect if you have children or pets. You can even use it as extra storage space, with built-in cupboards and shelves.

What is the Best Type of Conservatory Roof?

The answer to this question depends entirely on what you want from your conservatory roof. If you want something practical and functional, then metal may be the way forward. It is sturdy, versatile, and cost-effective. If you prefer a more rustic look, then glass might be the right choice for you. It is light, elegant, and looks beautiful against the backdrop of nature.

If you want something unique and special, then you’ll probably want to go for tiles.

What Factors Will Cause a Conservatory Roof to Deteriorate Faster?

There are several things that could affect your conservatory roof’s lifespan. The first thing to check is whether your conservatory roof needs replacing. A conservatory roof that doesn’t have proper drainage holes will start to leak after just a few months. If you notice any leaks, then call us immediately. We can put in new drainage holes at no extra charge.

Another common issue is condensation. Condensation forms on roof windows and doors when cold air enters them. As temperatures rise during summer, the temperature difference between inside and outside becomes smaller. This causes warm air to move into the building through the windows and doors. When this happens, moist air gets trapped inside the building. Moisture collects on the windows and walls, causing mould growth. This is why we recommend installing double glazing. Double glazed windows reduce heat loss and keep out draughts.

Another factor that affects your conservatory roof’s longevity is how well insulated it is.

Insulation of Conservatory Roofs

If your conservatory roof is poorly insulated, it will lose energy quickly. You can easily tell if your conservatory roof is properly insulated because there shouldn’t be any gaps around the edges. If there are gaps around the edge of your conservatory roof, then it isn’t properly insulated.

You can insulate your conservatory roof yourself with foam insulation. Foam insulation comes in various thicknesses, but the most common size is 1 inch thick.

Maintenance of Conservatory Roof

It is important to maintain your conservatory roof regularly. Maintaining your conservatory roof ensures that it lasts longer. Here are some simple tips to help you maintain your conservatory roof:

– Clean your conservatory roof regularly with a soft brush. Use cleaning products designed specifically for conservatories. These usually contain soap and water.

– Make sure that your conservatory roof is free from leaves, twigs, and other debris.

– Check your conservatory roof for cracks or damage.

How do Conservatories Deteriorate More Quickly?

Strong winds and heavy rain will cause conservatories that are constantly exposed to extreme weather conditions to deteriorate faster. A conservatory facing south will suffer from increased deterioration due to continuous UV exposure.

We always recommend that you repair and replace old/broken components when they need to be replaced when necessary.

FAQs

Can conservatory roofs be replaced?

Yes, they can. In fact, many people choose to replace their old conservatory roof every 5-10 years. This is because conservatories age over time. They become less efficient at keeping out cold and damp weather. Over time, they get wetter and colder than before. This means that water can seep under the roof making conservatory roof replacement inevitable.

Does adding a solid roof to a conservatory add value?

Yes! Adding a solid roof to a traditional conservatory adds value to your home. Solid roofs are much easier to clean than slate or tile roofs. They also provide better protection against rain and snow. In addition, they don’t require regular maintenance like slate or tile roofs.

Is it possible to replace my conservatory roof?

Yes, it is possible to replace your conservatory roof. The replacement process depends on what kind of roof you have. Slate roofs are very easy to repair. Tile roofs are more difficult to repair as they need professional services. However, if you’re looking to upgrade your conservatory roof, you may consider adding a solid roof. It’s an affordable way to improve the look of your conservatory while providing additional benefits such as improved security and added value.

How much does a conservatory roof cost?

The average cost of a conservatory ranges between £2800 and £5000.

Do I need planning permission for a conservatory roof?

You may not need planning permission for a conservatory if you comply with building regulations and the rules stipulated by permitted development which may be subject to limits.

Can you put a new roof on an old conservatory?

Yes, you can.

What Makes A Conservatory?

A wide variety of strong and sturdy materials are used to construct conservatories. Glass roofs are also a common material to allow natural light. Materials you choose for your conservatory won’t affect its lifespan too much. Proper maintenance plays a crucial role in the longevity of your conservatory. When it comes to saving you time and money in the future, it is also vital that you hire a high-quality installation team.

What is the most popular conservatory roof material?

Glass followed by polycarbonate are the two popular roofing materials for conservatories.

Check our previous post out here: How much does EPDM Rubber Roofing Cost?

youtube

source https://fortisfarnboroughroofing.co.uk/blog/how-long-do-conservatory-roofs-last-uk/ from Fortis Roofing Farnborough https://fortisfarnboroughroofing.blogspot.com/2022/06/how-long-do-conservatory-roofs-last-uk.html

0 notes

thiphrisitys · 2 years

Text

How much does EPDM Rubber Roofing Cost? (UK)

How much does EPDM Rubber Roofing Cost?

EPDM rubber roofing cost for materials ranges between £700 and £1000. Labour costs may range between 200 and 450. The average price in terms of square metres ranges between about £60 and £80. It’s worth noting that the average cost is indicative. The exact costs may vary depending on several factors including:

* Your location. Labour costs for roofers vary from city to city so does the square feet cost.

* Rubber type: There are plenty of options available in the market. The quality and type of rubber will determine the final costs.

* Roof height: Generally, work done on high roofs costs more because of the inherent dangers associated with it.

* Roof size: The bigger the roof, the larger the material and installation cost.

Please note that it’s advisable to get the job done by a professional roofer to guarantee your peace of mind.

What is EPDM Rubber Roofing?

EPDM is a kind of flexible membrane used for roofing purposes. EPDM roofing has been around since the 1970s. It was originally developed as an alternative to asphalt shingle roofing. However, it soon became popular due to its durability, ease of installation, low maintenance requirements and affordability. Today, EPDM is one of the most preferred types of roofing materials for low-sloped roofs and flat roofs.

How Does EPDM Roofing Work?

The process of installing an EPDM roof is very easy. First, you have to cut the required area for your project. Then, you apply the adhesive tape onto the surface of the substrate. Next, you peel off the protective paper and place the membrane on top of the adhesive tape. Finally, you press down firmly to ensure proper adhesion. After this, you wait for the glue to dry completely. Once the adhesive has dried, you remove the protective paper. You then install any necessary fasteners.

What Are the Advantages of EPDM Rubber Roofing?

The following are some of the advantages of using EPDM roofing:

Easy to Install

Good for general repairs

Durable

Low Maintenance

Water Resistant

Long Lasting

Affordable

Environment Friendly

Cost-Effective

Disadvantages of EPDM Roofing?

While there are many benefits of using EPDM roofing, there are also a few disadvantages. Some of these include:

Labor Costs: As mentioned earlier, labour costs vary from city to country. In addition to this, the labour costs also depend on the number of workers needed. If you need just one worker, the costs will be lower. On the other hand, if you require multiple workers, the costs will increase.

Installation Time: Depending on the size of your roof, installation time may take anywhere between 2 hours to 3 days. For example, a 10 m x 20 m roof would take approximately 40 hours to complete.

What are the Different Types of Rubber Roofs?

There are three main types of rubber roofing:

Single-ply – This type of rubber roofing consists of only one layer of rubber. It is usually applied over flat surfaces such as rooftops or parking lots. It can be easily installed using simple tools.

Double-ply – This type of rubber is made up of two layers of rubber. It is mostly used for commercial projects, industrial sheds, warehouses etc.

Triple-ply – This type is similar to double-ply but it has three layers of rubber. It provides better protection against water penetration than single-ply rubber.

FAQs

Is EPDM good for my flat roof?

EPDM is a great product for flat roofing because it can be easily applied to a variety of surfaces, including metal, wood, concrete, brick, stone, etc., and will not crack. EPDM is also very durable and resistant to extreme weather conditions such as rain, snow, wind, heat, cold, sun, and UV radiation and has a great life expectancy.

What is the difference between EPDM and PVC?

The main difference between EPDM and PVC is that EPDM is more flexible than PVC and therefore easier to work with. It can be cut and shaped into any shape, unlike PVC which cannot be cut or shaped without breaking down its molecular structure. EPDM is an excellent material for use on roofs since it is strong, waterproof, and easy to install.

Is a rubber roof better than shingles?

A rubber roof is generally considered to be a better option than shingles. This is due to the fact that they are cheaper to install and maintain. They do not require regular maintenance like shingles do. A rubber roof is also less expensive to replace if damaged. Also, a rubber roof lasts longer than a traditional asphalt roof.

How long do EPDM rubber roofs last?

Generally, a rubber roof if maintained properly should last around 20 to 50 years.

Is EPDM cheaper than TPO?

Yes, EPDM roofs are cheaper than TPO and are an economical choice. TPO roofing may work out to be more expensive.

Is EPDM Roofing Safe?

Yes, EPDM roofing is safe. In fact, it is considered to be safer than other roofing systems like metal, tile, slate, wood and concrete. It is also fire resistant. Moreover, it is not flammable.

Check our previous post here: How to Build a Flat Roof (UK)

youtube

source https://fortisfarnboroughroofing.co.uk/blog/how-much-does-epdm-rubber-roofing-cost-uk/ from Fortis Roofing Farnborough https://fortisfarnboroughroofing.blogspot.com/2022/05/how-much-does-epdm-rubber-roofing-cost.html

0 notes

thiphrisitys · 2 years

Text

How to Build a Flat Roof (UK)

How to Build a Flat Roof

The construction of a flat roof differs greatly from that of a pitched roof, and it’s important to know the basic requirements of a flat roof structure.

Ideally, the roofing joists should be laid across the walls of the structure, which in most cases are the upright items. It is recommended to use steel joists in the walls because they provide greater stability.

A typical distance between the joists is around 400mm, although this may vary depending on the roof size and material being used. That way, less pressure is placed on the top. As always, we recommend to use a professional roofing service to deal with this as roofing in general can be a dangerous job.

How do you build a flat roof step by step?

Flat roof systems are usually constructed using trusses or purlins. The trusses are made up of two parallel beams with cross members connecting them together at right angles. They can also be called girders.

Purlins are similar to trusses but have no diagonal braces. Instead, they’re attached directly to the wall.

To construct a flat roof, first layout the trusses or purlin layout. Then cut the necessary pieces for each one. Here is a step by step method:

1) The first thing you need to do is lay down the base plates for the roof. These must be at least as thick as the wall thicknesses. They can be made of plywood or metal sheets.

2) Once the base plates have been laid out, you’ll need to cut them into strips. This will depend on the area of the roof you want to cover. For example, if you’re covering an entire room, then you’ll only need one strip. If you’re covering a smaller area, such as a porch or balcony, then you might need two or more strips.

3) After cutting the base plates into strips, you’ll need to attach them to the wall using screws or nails. You’ll also need to install the rafters, which are pieces of wood that run along the length of the building.

4) Now comes the tricky part: attaching the ridge beam. A ridge beam runs along the centerline of the roof, and it holds everything together. To make sure your ridge beam fits properly, you’ll need to measure its width and height. Then, once you’ve found the right dimensions, you’ll need to mark where the edges of the roof meet.

5) Next, you’ll need to nail the ridge beam to the base plate, making sure that the ends of the beam fit snugly against the edge of the roof.

6) Finally, you’ll need to add the sheathing to the underside of the roof. The sheathing is basically just plywood, but it has a special adhesive applied to it. When installing the sheathing, make sure that it goes all the way up to the ridge beam.

How Do I Measure Flat Roofing?

A flat roof is easier to measure than a pitched roof since it is easier to find the square meterage. Measure the length and width of each roof plane, including the dormers, before multiplying the numbers. You will then be able to figure out each plane’s area.

Add the final calculations from the two or more planes together to determine the size of the flat roof. It will enable you to determine how much of each material you need and how much you may have to pay for it.

Types of Flat Roofing

You can choose from two basic types of flat roofing systems. Which one to choose will depend on the requirements of the building, taking into account the level of insulation required, heat loss, and building codes.

Warm Flat Roofing:

The insulation used in warm roof has no air gaps above or below the roof deck. This approach requires a vapour control layer beneath the insulation. A ventilated roof is not required with this approach.

Cold Flat Roofing:

The insulation used in cold roof is usually stowed between the rafters of the roof. Above the insulation, a 50mm air gap must be left, and the roof perimeter must be ventilated.

Common materials used for flat roof construction

Hot tar and gravel

This type of roof is commonly used in industrial applications. Hot tar and gravel roofs are very durable and require little maintenance. However, they are expensive because they use large quantities of tar and gravel.

Modified bitumen

This type of roof uses modified bitumen. Modified bitumen is cheaper than hot tar and gravel roofs. However, it does require regular maintenance.

Asphalt shingles

This type of roof consists of asphalt shingles. They are inexpensive and easy to maintain. However, they do not last as long as other types of roofing.

Metal roofing

This type of roof system is made of metal panels. Metal roofs are popular because they look like traditional slate or tile roofs. They offer excellent durability and fire resistance.

Fiberglass

This type of roof has become popular because it is easy to apply and maintain. Fiberglass roofs do not require any ventilation holes. They are also lightweight and cost-effective.

Rubber membrane

This type of roof consists of rubber membranes also known as EPDM rubber. Rubber membranes are inexpensive and easy to install. However, they are vulnerable to damage by extreme weather conditions.

FAQs

Can I build my own flat roof?

No. Unless you are a professional roofer, it’s quite challenging to build your own flat roof. You also only need some general roof repairs, so always go down this avenue before moving forward with a roof replacement.

What is the thickness of a flat roof?

The minimum recommended thickness is 18mm. This differs when working on commercial projects.

What size joists do I need for a flat roof?

It is best to span the shortest distance possible between joists. 200mm x 50mm, 175mm x 50mm, and 150mm x 50mm are the most common joist sizes. Joists are normally spaced 400mm apart but should not exceed 600mm.

What Pitch is a Flat Roof?

To shed rainwater, flat roofs must have a slope, known as a fall. Ideally, it should be between 1:40 and 1:80.

Check out our previous blog post here: 9 Top Restaurants and Hotels In Farnborough

youtube

source https://fortisfarnboroughroofing.co.uk/blog/how-to-build-a-flat-roof-uk/ from Fortis Roofing Farnborough https://fortisfarnboroughroofing.blogspot.com/2022/05/how-to-build-flat-roof-uk.html

0 notes

thiphrisitys · 2 years

Text

9 Top Restaurants and Hotels In Farnborough

Info Provided by Fortis Roofing Farnborough:

Farnborough is a town in Hampshire, England. It has a population of just over 60,000 people, and the town has been ranked as one of the least prosperous places to live. Furthermore, it has many top-rated restaurants dotted around its streets serving delicious British Food.

From Indian to Italian cuisine, Farnborough has it all, there is no shortage of places to eat! Whether it’s a quick lunch, an intimate dinner for two, or a family feast with friends and family, there is an eatery for everyone in this diverse place.

1. Malacca

Over 300 customers have given this Chinese/Thai/Malaysian restaurant excellent reviews for their service, cleanliness, and wide range of food! There’s something for everyone at this restaurant. It offers dishes for all budgets and tastes, whether you want to order a main meal or just some sweets.

2. Everest Tandoori

This Nepalese and Indian restaurant has been a favourite for over 20 years. With over 400 excellent reviews, their tasty food and warm ambience are second to none. With a wide range of vegetarian, vegan and gluten-free options, you can be sure to find something for everyone here.

3. Brasserie Restaurant

The service at the restaurant is excellent. The waitstaff is attentive and professional. The food does not disappoint-the kitchen staff has a knack for placing three-course meals in front of you like pieces of art. Over 500 savvy reviewers mention how they felt luxurious here, and there’s no reason why you won’t too.

4. The Crab and Anchor

The Crab and Anchor has an extensive range of wines, beers and cocktails on offer. Alongside this, they also have a wide range of pub food on the menu, which is freshly prepared in their kitchen. The pub has a heated patio with a view overlooking the gardens, and there are over 600 reviews for this pub so far which gives it an average rating of 4.5 stars out of 5

5. The Swan

When you walk into the pub, you are greeted with a warm atmosphere and an incredible smell of freshly cooked food. They have comfortable seating, an extensive selection of craft beers, and modern pub décor. The pub has over 600 reviews and an average rating of 4.2 out of 5.

6. Netley Guest House

The Netley Guest House is comfortable and welcoming in the heart of Farnborough. The property offers double fronted, architect-designed rooms with private en-suites. Rooms are decorated with stylish furniture and include tea making facilities. For those travelling to Farnborough for the air show, the hotel is close by.

7. Blue Sky Apartments

Blue Sky Apartments are a great place to live. They offer fully functioning apartments that include kitchens and lounges in addition to the rooms. It has a 9.3 rating on Booking.com, and it is easy to see why when you take one look at the photos of this beautiful facility.

8. Wisteria Guest House

This tranquil property caters for couples, families and individuals. It boasts a luxurious grey scheme throughout the bedrooms with ensuite bathrooms. It has a shared lounge, kitchen & garden with terrace and has been rated 9.2 out of 10 on Booking.com

A lovely little B&B located in the centre of Farnborough. This guesthouse has a very homely feel to it. All bedrooms are ensuite and come equipped with flat-screen TVs, free Wi-Fi and tea and coffee making facilities.

9. The Old Mill Inn

Housed in a converted water mill, the Old Mill Inn is a traditional English country inn set in the picturesque village of Godalming. The pub serves delicious British cuisine using local produce.

Conclusion

There are many other places to eat in Farnborough, but these are the best-reviewed ones. You will need to do your research if you want to try some of the less well-known places. Nevertheless, we hope you find this list useful. Leave us a comment, the office staff at Fortis Roofing Farnborough would be happy to hear from you!

View our previous blog post here: How To Cut Slate Roof Tiles

youtube

source https://fortisfarnboroughroofing.co.uk/blog/9-top-restaurants-and-hotels-in-farnborough/ from Fortis Roofing Farnborough https://fortisfarnboroughroofing.blogspot.com/2022/05/9-top-restaurants-and-hotels-in.html

0 notes

thiphrisitys · 2 years

Text

How To Cut Slate Roof Tiles (UK)

How To Cut Slate Roof Tiles

Slate roof tiles come in many different shapes and sizes. Some tiles are square, some are rectangular, and others are round. Regardless of their shape, most slate roof tiles fit together like puzzle pieces. In order to install slate roof tiles, you’ll need to cut them to size. Cutting the tiles is an important step in the installation process. Without proper cuts, the tiles won’t fit together correctly.

There are several ways to cut slate roof tiles. Each method requires slightly different equipment, but they all share one common goal – to cut the tiles

The first thing you’ll want to do is mark out where each tile will sit on your roof. It’s best to use chalk so that you don’t accidentally damage your slate roof tiles during this process. Mark out the position of each tile onto the roof using a level. Once you’ve marked them out, you can then measure the distance between each tile, making sure you leave enough space between them.

Cutting Slates With Power Tools

If you’re planning on cutting your slate tiles with power tools, you’ll want to ensure that you’re using the appropriate tool for the job. For example, if you’re looking to cut slate roof tiles by hand, then you’ll want to look for a tile saw. However, if you’re planning on using a table saw, then you’ll need to ensure that your slate has been properly marked.

If you plan on cutting your slate tiles with power tools, there are two main methods: sawing and drilling. We’ll look at each method in turn.

Sawing

The best way to cut slate tiles with power tools is to use a circular saw. The circular saw has a blade that spins at high speed, making it ideal for cutting through slate. You’ll also find that a circular saw makes quick work of cutting tiles. To get started, you’ll need to make sure that your slate tiles have been properly marked before you start cutting. If they haven’t been marked, then you’ll need a marking gauge or other measuring device. This will help you to accurately cut the tiles.

Once you’ve marked your slate tiles, you can then cut them with a circular saw. Start by holding the tile firmly against the fence of the saw. Then, slowly move the tile back and forth as you run the blade along the edge of the tile. When you reach the end of the tile, stop moving it forward and pull it away from the saw. Continue doing this until all of the tiles are cut.

Drilling

Another good option for cutting slate tiles with power tools would be to use a drill. A drill works well for cutting slate because it allows you to control how much force you apply when you push down on the tile. To begin, you’ll need to secure the tile firmly against the drill bit. Next, hold the tile steady while you rotate the bit into place. Use the screwdriver handle to guide the bit into the tile. Keep rotating the tile around the bit until it is fully embedded.

When you’re finished, remove the tile from the drill bit and continue to drill holes in the remaining tiles.

After that, follow these steps to install slate tiles on your roof.

How to Install Slate Roof Tiles

Step 1: Determine the Type of Tile You Have

The first thing you need to do when working with slate tiles is to determine what kind of material you have. There are three main types of slate:

Flat-cut ( also called flat-slate or plain-slate)

Curved-cut

Bullnose

Flat-cut tiles are usually rectangular in shape, while bullnose tiles are more rounded at the edges. Curved-cut tiles are somewhere between the two.

If you’re unsure which type of tile you have or if it has been damaged, contact a roofing contractor. They can identify the exact type of tile you have and recommend the best way to cut them.

Step 2: Choose a Cutting Tool That Will Work Best for Your Project

Once you know the type of tile you’ve got, you can begin choosing a cutting tool. For most projects, a circular saw works well because it allows you to make straight cuts across the face of the tile. However, if you want to create curved cuts, you may need a different tool.

For example, if you want to make a curve along an edge of the tile, a jigsaw would be ideal. It creates smooth curves by using a blade that moves back and forth as it cuts. If you want to make a long, straight cut through multiple layers of slate, consider a reciprocating saw. This tool makes clean, straight cuts without leaving any debris behind.

Step 3: Cut the Tile

After you have chosen the right tools, you’ll need to start cutting the tile. Start by making sure the surface of the tile is dry. Then use a utility knife to remove the protective layer from around the tile. Next, place the tile on a piece of plywood and position it so that the top edge is flush with the bottom edge. Make sure there isn’t anything underneath the tile that could get caught in the blade.

Next, attach a guide block to the table where you plan to cut the tile. Use this guide block to help keep the tile steady during the cutting process. Hold the tile firmly against the guide block with one hand, and hold the blade against the tile with the other. Slowly move the blade down the length of the tile until it reaches the end.

Repeat this process until you reach the desired length. Once you finish, flip the tile over and repeat the same procedure on the underside of the tile.

Step 4: Clean Up the Surface

When you’re done cutting the tile, wipe up any leftover pieces of slate that might still be stuck to the table. Also, try to avoid getting any dust into the seams of the tile. To prevent this, use a vacuum cleaner to suck up all the loose particles.

Step 5: Apply Sealant

When you’re ready to apply sealant, you should use a brush to spread it evenly across the entire surface of the tile. After spreading the sealant, let it sit for about 10 minutes before moving on to the next step.

Step 6: Attach Strips

Now comes the fun part! Before attaching your new roof tiles, you will need to install strips of wood on either side of each tile. These strips serve as guides for the tiles as they go onto the roof.

To do this, first, measure out how much space you need between each tile. You can use a tape measure or a ruler to determine the distance. Then, mark the centre point of the tile with a pencil. Using a drill, make holes at both ends of the strip. The holes should be slightly larger than the diameter of the screws used to secure the tile.

Attach the strips to the roof with screws. Be careful not to hit the edges of the tile when drilling the holes.

Step 7: Install Roof Tiles

Finally, it’s time to put your new roof tiles in place. First, set the tile in its proper location. Then, slide the strips of wood under the tile and screw them to the roof. Repeat this process until you’ve installed every single tile. If you are looking to repair or replace your roof then give our team a call today.

Once you’re finished installing the tiles, give the whole thing a good cleaning. Then, apply some more sealant to protect the newly installed roofing material.

Why Choose Slate Roof Tiles?

Slate has several unique benefits over other materials, including the fact that it works well both inside and outside. Slate roofs last longer than most other types of tile roofs. They typically last between 60 and 80 years. Slate is also one tough material for roofs. It’s durable enough to withstand extreme temperatures (heat and cold), windy conditions, heavy snow loads and even hail damage. In addition, slate tiles usually get even better looking with time, as their color becomes richer and their surface develops an attractive sheen.

Slate roofs are also sustainable and environmentally friendly because they’re made from natural materials like clay and sandstone. Recycling them minimizes waste and saves resources.

It is hard to imagine a better roofing material to make a home stand out.

FAQs

Can you cut roof slates with a tile cutter?

Yes, you can cut a slate with a tile cutter.

Will a masonry blade cut slate?

Any type of wet saw, whether it is a masonry saw or a tile saw, can make slate cutting a piece of cake.

Can I cut slate with an angle grinder?

Angle grinders, electric tile cutters or circular saws can be used to cut slate. Power tools like these should be used if your tiles are thicker in shape. For bigger and thicker slates, cutting by hand is not recommended.

View our previous post here: What Is Farnborough Like To Live In?

youtube

source https://fortisfarnboroughroofing.co.uk/blog/how-to-cut-slate-roof-tiles-uk/ from Fortis Roofing Farnborough https://fortisfarnboroughroofing.blogspot.com/2022/05/how-to-cut-slate-roof-tiles-uk.html

0 notes

thiphrisitys · 2 years

Text

What Is Farnborough Like To Live In?

Info provided by Fortis Roofing Farnborough:

Farnborough is situated in Hampshire, England’s most northern county. Domesday Book of 1086 mentions the town from Saxon times. The town is located just above the South Downs National Park, just a 20-minute drive from its neighbouring city Guildford.

As it takes you just over an hour to reach the centre of London from Farnborough, it’s a great place to live if you want to escape the hustle and bustle of the big city but still need to be close to work.

Population of Farnborough

The 2011 census reported that there were 65,034 people living in Farnborough. Within the town, the ratio of females to males is almost 50/50, with females slightly ahead at 50.1%.

Real Estate in Farnborough

According to Zoopla, the price of a detached house in Farnborough is currently £511,247 on average. For detached homes in Farnborough, the value change shows a positive 6.40 per cent.

Farnborough’s semi-detached properties are valued at £350,816. Again, Zoopla estimates a healthy increase of 6.28% in semi-detached home values.

Terraced homes tend to be cheaper than their semi-detached counterparts as the average price paid is £292,813 for a terraced home. According to Zoopla, a terraced house in Farnborough is currently worth £277,850 on average. This represents an increase of 3.31%!

Flats in Farnborough are currently worth £212,162. Zopla estimates the current average value to be £214,310 with a change of 2.53%, which is a rise of approximately 5k.

The average property in Farnborough rents for £951per month. This number changes on whether you are just looking for a room £538, a flat £940 or a whole house for £1,185.

Farnborough – Safety Wise

According to police.uk, Farnborough had 92 crimes reported during September 2020. Twenty-five reports of violent and sexual crimes were reported during September in Farnborough, followed by 19 reports of antisocial behaviour reports and 16 reports of shoplifting. In Farnborough, there have been 66 burglaries in the past year.

Where is the best place to live in Farnborough?

The following are the two best places to live in Farnborough.

Empress Park

The Empress Park area has many detached houses. Several good schools are located nearby, as well as a train station, a supermarket and a rugby and tennis club! In November 2020, Zoopla estimates the average value of a property on Empress Avenue to be £716,180.

Farnborough Park

The neighbourhood is dotted with luxury detached homes, as well as less expensive semi-detached properties. The area also features a few aviation museums, a big supermarket such as Asda and Sainsburys, a playing field, and a couple of good schools. In this area (Hilder Gardens specifically), Zoopla estimates the average value of a home to be around £630,000.

It is relatively easy to travel in and around Farnborough because of its proximity to London, the M3 and the A331.

Trains in Farnborough

Three train stations serve Farnborough. These are Farnborough, Farnborough North, and Frimley. London Waterloo is just over half an hour away from Farnborough train station.

Airport near Farnborough

Despite its aviation roots, Farnborough is only 17.9 miles away from London Heathrow, which takes 30 minutes to reach by car. There is also Farnborough Airport.

Schooling in Farnborough

There are 44 schools and colleges in the Farnborough/Aldershot area. Including Farnborough College of Technology, North and South Farnborough Infant Schools, 17 schools were rated ‘Outstanding’ by Ofsted. University-level degrees are available within Farnborough itself at the University Centre Farnborough (UCF) and slightly further away at the University of Surrey.

Shopping in Farnborough

Princes Mead Shopping Centre offers everything you need in Farnborough. Besides the over 30 shops here, there are plenty of restaurants so you can eat and rest between shopping. Asda and Sainsbury’s supermarkets are located within walking distance of Princes Mead.

Conclusion

Farnborough offers a good lifestyle balance for those who require good amenities close to their homes and need to commute into London.

London Waterloo is less than 46 minutes away during peak times, and the M3 is easy to access. Known mostly for its biennial Farnborough International Airshow, Farnborough attracts over 80,000 visitors from over 96 countries every two years!

Farnborough has a lot of parks, play areas, and community sports clubs, so getting outdoors to breathe fresh air is easy. Although Farnborough does not have an exciting town centre, it does provide all the basic amenities you will need.

Nevertheless, if you want more shopping and eateries, you can travel 20 minutes to Guildford, which has a larger population. Overall, Farnborough is an ideal place to live in the UK. If you enjoyed our blog post, then leave us a comment. The office staff at Fortis Roofing Farnborough always love to respond to comments!

See our previous blog post here: Can You Have Solar Panels On A Flat Roof?

youtube

source https://fortisfarnboroughroofing.co.uk/blog/what-is-farnborough-like-to-live-in/ from Fortis Roofing Farnborough https://fortisfarnboroughroofing.blogspot.com/2022/05/what-is-farnborough-like-to-live-in.html

0 notes

thiphrisitys · 2 years

Text

Can You Have Solar Panels On A Flat Roof? (UK)

Can You Have Solar Panels On A Flat Roof

Yes. Absolutely! You can have solar panels roofs installed on a flat roof – both domestic and commercial. It goes without saying that complementing your conventional source of power requirement with solar energy goes a long way in saving costs and the environment.

Feed-in tariff subsidies and affordability of photovoltaic (PV) panels have massively contributed to the increased adoption of solar power. The UK’s solar power consumption in 2020 accounted for about 4% of the total electricity consumption. Since direct sunlight is not necessary for generating solar electricity, the UK is not really in a disadvantageous position despite the gloomy weather.

No wonder solar power is growing in popularity! So how do you go about installing a solar panel on your flat roof?

How Do Solar Panels Work on a Flat Roof?

The mechanism for solar panels on a flat room is not different from panels on a tilted roof. The only disadvantage of a flat roof is the panels may not be able to absorb enough sun rays and suffer damage from water pooling. But that can be overcome by having a tilted-mounting system – a clever workaround that prevents damage from water pooling.

Solar Panel Installation on Flat Roofs

Installing solar panels on a flat rooftop is relatively easy as compared to other types of roofs. However, it requires some planning and preparation before installation. Here are some tips:

Ensure there is sufficient space for mounting the panels.

Make sure the roof is structurally sound.

Check if there are any obstructions such as chimneys or air conditioners.

Consider the orientation of the panels.

Plan for future maintenance.

Have a backup plan in case of an emergency.

Get professional help when needed.

Be prepared to pay more upfront but save money in the long run.

Understand the pros and cons of each type of roof.

Choose the right material for the job.

Know what kind of warranty you want.

Learn about the best time to install solar panels.

Keep an eye out for upcoming government policies.

Install solar panels at the correct angle and height.

Use high-quality solar panels.

Avoid using low-quality panels.

Buy solar panels online.

Select the right inverter.

Understand the benefits of solar panels.

Take advantage of tax incentives.

Hire a professional installer.

Understand the difference between grid-tied and off-grid systems.

Understand the advantages and disadvantages of each system.

Design your home around solar panels.

Understand the importance of batteries.

Think about battery storage options.

Understand the differences between PV and hybrid installations.

Decide whether you need to buy additional equipment.

Understand the difference between residential and commercial installations.

Understand the impact of shading on solar panels.

Understand the differences between passive and active cooling.

Understand the importance of heat dissipation.

Understand the benefits of thermal mass.

Understand the importance of insulation.

Understand the advantages and drawbacks of solar hot water heating.

Pros and Cons of Solar Panels on a Flat Roof

There’s no arguing about the advantages of installing solar panels. Some of the salient advantages include:

Energy bills savings

Reduced carbon footprint

Minimum maintenance costs

That being said, there are some disadvantages of installing solar panels on a flat roof too. However, they don’t outweigh the benefits by any measure. Some of them include:

Extra costs of installing a tilted mechanism for flat roof solar panels average about 3% of the total costs

Likelihood of water damage due to water pooling. But that can be prevented by installing a tilting mechanism as discussed above.

At What Angle Should Flat Roof Solar Panels be Installed?

Ideally, the panels should be installed at an angle of 10 degrees. The upward tilt is needed to ensure the panels get enough exposure to daylight or sunlight. Moreover, the slope helps the panels self clean themselves. The tilt also enhances the efficiency and longevity of the panels.

We recommend that you hire a qualified roofing service to install solar panels on your flat roof.

Is the Wind an Issue When Installing Solar Panels on Flat Roofs?

Yes, strong winds can be a potential safety hazard to flat roof solar power panels. High winds carry the risk of blowing off the panels. However, you can install some safety mechanisms in place to counter the risk. For example, you can fix the panels to the structure of your building or create support structures to secure the panels. You might also want to add weight to the panels to prevent them from tipping over.

Which Direction Should the Array Be Oriented?

The array should ideally face east or west depending upon where the sun rises in your area. This ensures maximum energy generation during the day. In addition, it reduces the chances of overheating during the summer months when the sun is high in the sky.

Ideally, your solar array should face south in the UK.

FAQs

Are solar panels good on flat roofs?

Yes, solar panels are great on flat roofs because they can capture more energy than those mounted on sloped roofs. This means that you will save money on electricity bills.

How many solar panels do I need for a flat roof?

It depends on how much energy you need to generate. If you’re looking for a small scale project, then you can go with one panel. However, if you’re looking to build a large scale project, then you’ll need multiple panels.

Why are solar panels expensive?

Cost is always going to be a factor when choosing to invest in solar technology. In fact, the cost is one of the biggest reasons why people choose not to buy solar panels. However, this doesn’t mean that you shouldn’t consider investing in solar panels.

Does a flat roof need planning permission for solar panels?

No. The only thing you need to plan is where you want to mount the panels. There’s nothing stopping you from mounting them anywhere on your roof.

What does the warranty cover?

Generally, the warranty covers the entire installation process including the design, manufacturing, installation and testing phases. It also covers the replacement parts and labour charges for repairs. Reach out to your local roofing specialists for more information.

Do solar panels work well in cold weather conditions?

Solar panels work best during warm months. They lose their effectiveness when it gets colder. However, you can still use them even when temperatures drop below freezing point. Just make sure that you keep your panels properly insulated.

youtube

source https://fortisfarnboroughroofing.co.uk/blog/can-you-have-solar-panels-on-a-flat-roof-uk/ from Fortis Roofing Farnborough https://fortisfarnboroughroofing.blogspot.com/2022/05/can-you-have-solar-panels-on-flat-roof_16.html

0 notes

thiphrisitys · 2 years

Text

Can You Have Solar Panels On A Flat Roof? (UK)

Can You Have Solar Panels On A Flat Roof

No wonder solar power is growing in popularity! So how do you go about installing a solar panel on your flat roof?

How Do Solar Panels Work on a Flat Roof?

Solar Panel Installation on Flat Roofs

Installing solar panels on a flat rooftop is relatively easy as compared to other types of roofs. However, it requires some planning and preparation before installation. Here are some tips:

Ensure there is sufficient space for mounting the panels.

Make sure the roof is structurally sound.

Check if there are any obstructions such as chimneys or air conditioners.

Consider the orientation of the panels.

Plan for future maintenance.

Have a backup plan in case of an emergency.

Get professional help when needed.

Be prepared to pay more upfront but save money in the long run.

Understand the pros and cons of each type of roof.

Choose the right material for the job.

Know what kind of warranty you want.

Learn about the best time to install solar panels.

Keep an eye out for upcoming government policies.

Install solar panels at the correct angle and height.

Use high-quality solar panels.

Avoid using low-quality panels.

Buy solar panels online.

Select the right inverter.

Understand the benefits of solar panels.

Take advantage of tax incentives.

Hire a professional installer.

Understand the difference between grid-tied and off-grid systems.

Understand the advantages and disadvantages of each system.

Design your home around solar panels.

Understand the importance of batteries.

Think about battery storage options.

Understand the differences between PV and hybrid installations.

Decide whether you need to buy additional equipment.

Understand the difference between residential and commercial installations.

Understand the impact of shading on solar panels.

Understand the differences between passive and active cooling.

Understand the importance of heat dissipation.

Understand the benefits of thermal mass.

Understand the importance of insulation.

Understand the advantages and drawbacks of solar hot water heating.

Pros and Cons of Solar Panels on a Flat Roof

There’s no arguing about the advantages of installing solar panels. Some of the salient advantages include:

Energy bills savings

Reduced carbon footprint

Minimum maintenance costs

That being said, there are some disadvantages of installing solar panels on a flat roof too. However, they don’t outweigh the benefits by any measure. Some of them include:

Extra costs of installing a tilted mechanism for flat roof solar panels average about 3% of the total costs

Likelihood of water damage due to water pooling. But that can be prevented by installing a tilting mechanism as discussed above.

At What Angle Should Flat Roof Solar Panels be Installed?

We recommend that you hire a qualified roofing service to install solar panels on your flat roof.

Is the Wind an Issue When Installing Solar Panels on Flat Roofs?

Which Direction Should the Array Be Oriented?

Ideally, your solar array should face south in the UK.

FAQs

Are solar panels good on flat roofs?

Yes, solar panels are great on flat roofs because they can capture more energy than those mounted on sloped roofs. This means that you will save money on electricity bills.

How many solar panels do I need for a flat roof?

Why are solar panels expensive?

Does a flat roof need planning permission for solar panels?

No. The only thing you need to plan is where you want to mount the panels. There’s nothing stopping you from mounting them anywhere on your roof.

What does the warranty cover?

Do solar panels work well in cold weather conditions?

youtube

0 notes

thiphrisitys · 2 years

Text

Can You Have Solar Panels On A Flat Roof? (UK)

Can You Have Solar Panels On A Flat Roof

No wonder solar power is growing in popularity! So how do you go about installing a solar panel on your flat roof?

How Do Solar Panels Work on a Flat Roof?

Solar Panel Installation on Flat Roofs

Installing solar panels on a flat rooftop is relatively easy as compared to other types of roofs. However, it requires some planning and preparation before installation. Here are some tips:

Ensure there is sufficient space for mounting the panels.

Make sure the roof is structurally sound.

Check if there are any obstructions such as chimneys or air conditioners.

Consider the orientation of the panels.

Plan for future maintenance.

Have a backup plan in case of an emergency.

Get professional help when needed.

Be prepared to pay more upfront but save money in the long run.

Understand the pros and cons of each type of roof.

Choose the right material for the job.

Know what kind of warranty you want.

Learn about the best time to install solar panels.

Keep an eye out for upcoming government policies.

Install solar panels at the correct angle and height.

Use high-quality solar panels.

Avoid using low-quality panels.

Buy solar panels online.

Select the right inverter.

Understand the benefits of solar panels.

Take advantage of tax incentives.

Hire a professional installer.

Understand the difference between grid-tied and off-grid systems.

Understand the advantages and disadvantages of each system.

Design your home around solar panels.

Understand the importance of batteries.

Think about battery storage options.

Understand the differences between PV and hybrid installations.

Decide whether you need to buy additional equipment.

Understand the difference between residential and commercial installations.

Understand the impact of shading on solar panels.

Understand the differences between passive and active cooling.

Understand the importance of heat dissipation.

Understand the benefits of thermal mass.

Understand the importance of insulation.

Understand the advantages and drawbacks of solar hot water heating.

Pros and Cons of Solar Panels on a Flat Roof

There’s no arguing about the advantages of installing solar panels. Some of the salient advantages include:

Energy bills savings

Reduced carbon footprint

Minimum maintenance costs

That being said, there are some disadvantages of installing solar panels on a flat roof too. However, they don’t outweigh the benefits by any measure. Some of them include:

Extra costs of installing a tilted mechanism for flat roof solar panels average about 3% of the total costs

Likelihood of water damage due to water pooling. But that can be prevented by installing a tilting mechanism as discussed above.

At What Angle Should Flat Roof Solar Panels be Installed?

We recommend that you hire a qualified roofing service to install solar panels on your flat roof.

Is the Wind an Issue When Installing Solar Panels on Flat Roofs?

Which Direction Should the Array Be Oriented?

Ideally, your solar array should face south in the UK.

FAQs

Are solar panels good on flat roofs?

Yes, solar panels are great on flat roofs because they can capture more energy than those mounted on sloped roofs. This means that you will save money on electricity bills.

How many solar panels do I need for a flat roof?

Why are solar panels expensive?

Does a flat roof need planning permission for solar panels?

No. The only thing you need to plan is where you want to mount the panels. There’s nothing stopping you from mounting them anywhere on your roof.

What does the warranty cover?

Do solar panels work well in cold weather conditions?

youtube

1 note · View note