#TileSolutions | Explore Tumblr Posts and Blogs

Visit Blog

Explore Tumblr blogs with no restrictions, modern design and the best experience.

Fun Fact

After the announcement of the deal with Yahoo!, there were 170K signatures of unhappy Tumblr users petitioning to prevent the sale in 2013.

fevicrete · 1 year

Text

Stick to quality with our tile adhesive - the perfect solution for your tiling needs!

#TileAdhesive #TileInstallation #DIYtiles #TileProjects #TileRenovation #TileDesigns #TileStyle #TileInspiration #TileTips #TileExperts #TileSolutions #TilingMadeEasy #didyouknow

0 notes

generouseaglewhispers · 1 year

Text

Common Issues People faced with Tiles

Uneven or crooked tile installation: One of the most common issues people face with tiles is uneven or crooked installation. This can be caused by not using the correct tools or not measuring properly before starting the installation.

Grout related issues: Another common issue is grout problems. If the grout is not mixed properly or applied incorrectly, it can crack or shrink, leading to gaps between tiles. This can cause tiles to become loose or even fall off.

Water damage: Tiles are often used in areas with high moisture levels, such as bathrooms and kitchens. However, if the tiles are not properly sealed, water can seep through and damage the substrate underneath. This can lead to mold growth and other serious problems.

Stains: Tiles can be prone to staining, especially if they are porous. If spills or stains are not cleaned up quickly, they can leave permanent marks on the tiles.

Chipping or cracking: Tiles can also chip or crack if they are not installed correctly or if they are subjected to heavy impact. This can be unsightly and can also compromise the structural integrity of the tile installation.

Discoloration: Over time, tiles can become discolored due to exposure to sunlight, chemicals, or other environmental factors. This can make them look old and worn, even if they are relatively new.

#TileIssues #TileProblems #BrokenTiles #CrackedTiles #TileMaintenance #TileReplacement #TileInstallation #TileDesign #TileRenovation #TileUpkeep #TileCare #TileSolutions #TileRestoration #TileDamage #TileGroutProblems.

0 notes

tilepowergregoryhills · 6 years

Photo

We now stock Mapei products #tpghtiles #tilepowergregoryhills #tiles #mapei #tilers #tilerspride #tilersofinsta #tilesolutions #tradie #tradielife #tiler #tilersofinstagram #tiling #tilingwork #adhesive #grout #narellan #wollondilly #campbelltown #gregoryhills #camden #macarthur #oranpark (at Tile Power Gregory Hills)

0 notes

fevicrete · 1 year

Text

No more messy installations! Our tile adhesive guarantees a hassle-free tiling experience!

#TileAdhesive #TileInstallation #DIYtiles #TileProjects #TileRenovation #TileDesigns #TileStyle #TileInspiration #TileTips #TileExperts #TileSolutions

0 notes

fevicrete · 1 year

Text

Tile adhesive is an essential component of any tiling project, and it is critical to ensure that the adhesive is applied correctly to avoid costly repairs down the line. However, even with the best of intentions, things can go wrong. In this blog, we will explore common tile adhesive problems and provide solutions to avoid costly repairs.

Poor Adhesion One of the most common tile adhesive problems is poor adhesion, which can result in tiles falling off or becoming loose. Poor adhesion can be caused by several factors, including incorrect mixing, incorrect substrate preparation, and poor-quality adhesive. To fix poor adhesion, remove the affected tiles and clean the substrate thoroughly. Mix a fresh batch of adhesive according to the manufacturer's instructions and apply it to the substrate using the recommended trowel size. Ensure that the adhesive is applied evenly, and the tile is pressed firmly into place. Use tile spacers to maintain the correct spacing between tiles.

Hollow Tiles Hollow tiles are a sign that the adhesive did not bond correctly to the substrate. This can be caused by using too little adhesive or using an adhesive that has passed its shelf life. To fix hollow tiles, carefully remove the affected tiles and clean the substrate thoroughly. Mix a fresh batch of adhesive and apply it to the substrate using the recommended trowel size. Use the flat side of the trowel to apply a thin layer of adhesive, and then use the notched side to comb the adhesive. Press the tile firmly into place, ensuring that there are no air pockets behind the tile.

Cracking Cracking can occur when the adhesive is not strong enough to support the weight of the tile or when there is movement in the substrate. To fix cracking, remove the affected tiles and clean the substrate thoroughly. If the substrate is not level, use a self-leveling compound to even out the surface. Mix a fresh batch of adhesive and apply it to the substrate using the recommended trowel size. Apply a layer of adhesive to the back of the tile, ensuring that the adhesive is evenly distributed. Press the tile firmly into place, and use tile spacers to maintain the correct spacing between tiles.

Staining Staining can occur when the adhesive bleeds through the grout, leaving unsightly stains on the tile surface. To prevent staining, apply a waterproofing membrane to the substrate before applying the adhesive. This will prevent the adhesive from bleeding through the grout. If staining has already occurred, remove the affected tiles and clean the substrate thoroughly. Apply a fresh coat of waterproofing membrane before applying a fresh batch of adhesive.

In conclusion, fixing common tile adhesive problems requires attention to detail and following the manufacturer's instructions. By using the correct adhesive, preparing the substrate correctly, and applying the adhesive correctly, you can avoid costly repairs down the line. If you are unsure about the best way to fix a problem with your tile adhesive, seek advice from a professional.