Last Seen Blogs
sairapatricia
Saira Patricia
neverforgetyouremyfavorite
yeehaw
sleepywhump
sleepywhump
emiliavas-blog1
Sem título
glaringenvy
INCURABLE / DISEASE
Text
Pros and cons of using tile spacers-
Tile spacers are small plastic or rubber pieces used to keep tiles properly spaced and aligned during installation. Here are some of the pros and cons of using tile spacers:
Pros:
Accurate alignment: Tile spacers help ensure that tiles are accurately aligned and spaced, creating a professional-looking finish.
Consistent spacing: By using spacers, the spacing between tiles can be kept consistent throughout the installation, which can be particularly important for tiles with patterns.
Easy to remove: Spacers can be easily removed once the adhesive has set, leaving clean and even gaps between tiles.
Cons:
Additional cost: Using tile spacers adds an additional cost to the installation process, which can be a drawback if you are on a tight budget.
Installation time: Installing spacers can be time-consuming, particularly if you are working with a large area of tiles.
Spacers may be visible: In some cases, the spacers may be visible between the tiles after the installation is complete, which may be unsightly to some homeowners or designers.
Overall, the use of tile spacers can greatly benefit the installation of tiles, providing a professional-looking finish and consistent spacing. However, the additional cost and installation time should be taken into consideration, and it's important to select a spacer size that won't be visible between the tiles after installation.
#TileSpacerBenefits#AccurateTilePlacement#ProfessionalFinish#ConsistentGroutLines#EasyTileInstallation#TimeSaving#DIYTileProjects#CleanTileWork#UniformTilePattern#Pre
0 notes
Text
Types of tile surfaces and their cleaning requirements:
There are several types of tile surfaces commonly used in homes and businesses, each with their own cleaning requirements:
Ceramic tile: This is the most common type of tile used in residential and commercial spaces. It is relatively easy to clean, and can be maintained with regular sweeping and mopping. However, the grout lines between the tiles can be prone to staining and discoloration, and may require periodic deep cleaning.
Porcelain tile: This type of tile is similar to ceramic tile, but is denser and more durable. It is also more resistant to stains and scratches, and is therefore a popular choice for high-traffic areas. Porcelain tile can be cleaned using the same methods as ceramic tile.
Stone tile: This includes a range of natural materials, such as marble, granite, travertine, and slate. Stone tile is often more expensive than ceramic or porcelain tile, and requires more specialized care. Harsh chemicals and abrasive scrubbing pads can damage the surface of stone tile, so it is important to use gentle cleaning products and techniques.
Glass tile: This type of tile is non-porous, which makes it resistant to stains and easy to clean. However, the surface can be prone to scratches, so it is important to use soft cloths and non-abrasive cleaning products.
Metal tile: This includes tiles made from stainless steel, copper, and other metals. Metal tile is generally durable and easy to clean, but can be prone to staining and discoloration if not properly maintained. Non-abrasive cleaning products should be used to avoid scratching the surface of metal tile.
Regardless of the type of tile surface, it is important to avoid using harsh chemicals or abrasive scrubbing pads, as these can damage the surface and lead to discoloration or other damage. Instead, use a mild cleaning solution and a soft cloth or mop to gently clean the surface, and be sure to rinse thoroughly with clean water to avoid leaving behind any residue.
#TileCleaning
#GroutCleaning
#PorcelainTile
#CeramicTile
#NaturalStone
#MoldRemoval
#DeepCleaning
0 notes
Text
The importance of regular tile maintenance:
Regular tile maintenance is essential to maintain the beauty and durability of your tiles. Here are some reasons why regular tile maintenance is important:
Prevents the build-up of dirt and grime: Over time, tiles can accumulate dirt and grime which can be difficult to remove. Regular cleaning can prevent the build-up of dirt and grime, making it easier to maintain the tiles and keeping them looking new.
Protects the tiles from damage: Tiles can be damaged by harsh chemicals or abrasive cleaning tools. Regular maintenance can help to protect the tiles from damage by using appropriate cleaning products and tools.
Extends the lifespan of your tiles: Regular maintenance can extend the lifespan of your tiles by preventing damage and deterioration. This can save you money in the long run by avoiding the need to replace your tiles prematurely.
Promotes hygiene: Tiles in bathrooms and kitchens can harbor bacteria and germs if not properly cleaned. Regular maintenance can help to promote hygiene by keeping the tiles free from germs and bacteria.
Enhances the appearance of your tiles: Regular maintenance can enhance the appearance of your tiles by keeping them clean and free from stains and discoloration. This can make your tiles look new and fresh, adding value to your home or business.
In summary, regular tile maintenance is essential to protect your investment in tiles, promote hygiene, and maintain the appearance of your tiles. It is important to develop a regular cleaning schedule that takes into account the type of tiles you have and the level of foot traffic in the area.
#TileMaintenanceMatters#CleanTilesHappySmiles#KeepTilesLookingNew#TileCleaningIsImportant#RegularTileMaintenance#HealthyHomeHappyLife#TileCareTips#MaintainYourTiles#TileHealthMatters#PreserveYourTiles#Regenerate response#ChatGPT Feb 13 Version. Free
0 notes
Text
How to remove tough stains from tiles?
Removing tough stains from tiles can be a challenging task, but with the right tools and techniques, it can be done effectively. Here are some tips on how to remove tough stains from tiles:
Prepare the area: Before you begin, make sure to protect the surrounding surfaces, such as countertops or walls, with plastic or towels. This will prevent any damage or staining to these surfaces.
Identify the stain: Different types of stains require different cleaning solutions. For example, oil-based stains may require a degreaser, while rust stains may require a rust remover. Identify the type of stain you are dealing with to choose the appropriate cleaning solution.
Use a cleaning solution: There are many commercial tile cleaners available that are formulated to remove tough stains. Follow the manufacturer's instructions for application and dilution. Alternatively, you can make your own cleaning solution by mixing equal parts water and vinegar, or water and baking soda, into a paste.
Apply the solution: Apply the cleaning solution to the stained area and let it sit for 10-15 minutes. For particularly tough stains, you may need to leave the solution on for longer.
Scrub the stain: Use a scrub brush or sponge to scrub the stained area, applying pressure as needed. Be careful not to scratch the tile surface.
#tilecleaning#toughstainremoval#groutcleaning#tilestainremoval#cleaninghacks#homecleaning#cleaningtips
0 notes
Text
Grout-ReGrouting
Grout is a material that is used to fill the gaps between tiles in order to make them strong and secure. Over time, grout can become discolored or damaged, and may need to be re-grouted. Re-grouting involves removing the old grout and replacing it with new grout to restore the appearance and integrity of the tile installation.
To re-grout, the following steps can be followed:
Remove the old grout using a grout saw, which is a small tool with a serrated blade. Be careful not to damage the tiles.
Clean the tile and the gaps using a solution of water and vinegar or a commercial tile cleaner. This will help remove any remaining grout or dirt.
Let the tiles dry completely before applying the new grout.
Mix the new grout according to the manufacturer's instructions. There are different types of grout available, such as sanded or unsanded, and the choice will depend on the size of the gaps between the tiles.
Apply the grout using a rubber float, making sure to fill the gaps completely.
Use a damp sponge to remove any excess grout from the tile surface.
Let the grout dry for the time specified by the manufacturer.
Once the grout is dry, buff the tiles with a dry cloth to remove any remaining grout haze.
Re-grouting can be a time-consuming process, but it is necessary to maintain the appearance and functionality of your tile installation.
#grout#regrout#tilemaintenance#groutrepair#groutcleaning#groutrestoration#tilegrouting#groutrefresh#groutrenewal#groutrevival
0 notes
Text
Common grout problems: troubleshooting issues such as cracking, staining, and discoloration.
Grout is a crucial component of any tiled surface. It not only holds the tiles in place, but it also helps to seal the gaps between them, preventing water from seeping through.
However, over time, grout can develop a number of problems that can detract from its appearance and function. Here are some common grout problems and how to troubleshoot them:
Cracking: Cracks in grout are usually caused by movement of the tiles or the substrate they are attached to. This can be due to settling of the building, temperature changes, or even excessive foot traffic. To fix cracked grout, remove the damaged grout with a grout saw or scraper, and then clean the area thoroughly. Apply new grout to the gaps and smooth it out with a grout float. Allow it to dry and then wipe away any excess with a damp sponge.
Staining: Grout can become stained over time due to spills, dirt, and grime. To remove stains, start by cleaning the grout with warm water and a mild detergent. For tougher stains, use a mixture of baking soda and water to create a paste, apply it to the stained grout, and allow it to sit for several minutes. Then, scrub the grout with a soft-bristled brush and rinse thoroughly with water.
Discoloration: Grout can also become discolored over time due to exposure to sunlight or cleaning products. To fix discolored grout, start by cleaning the grout with warm water and a mild detergent. For tougher stains, use a mixture of vinegar and water to create a solution, apply it to the discolored grout, and allow it to sit for several minutes. Then, scrub the grout with a soft-bristled brush and rinse thoroughly with water.
Mold and Mildew: Grout is porous and can harbor mold and mildew if it is not properly maintained. To remove mold and mildew, start by mixing equal parts water and vinegar in a spray bottle. Spray the solution on the affected grout and allow it to sit for several minutes. Then, scrub the grout with a soft-bristled brush and rinse thoroughly with water. For tougher stains, use a mixture of bleach and water to create a solution, apply it to the affected grout, and allow it to sit for several minutes. Then, scrub the grout with a soft-bristled brush and rinse thoroughly with water.
By following these troubleshooting tips, you can keep your grout looking clean and well-maintained for years to come.
#groutcleaning - For general grout cleaning tips and solutions.#groutstains - For removing stubborn stains from grout.#groutdiscoloration - For fixing grout discoloration issues.#groutcracks - For repairing cracked or broken grout.#groutsealing - For information on how to properly seal grout to prevent future problems.
0 notes
Text
Grouting tips and tricks: insider advice from professionals on how to achieve the best results when grouting tiles.
Grouting tiles is an important step in the tile installation process that requires attention to detail to achieve a professional-looking finish. Here are some insider tips and tricks from professionals on how to achieve the best results when grouting tiles:
Choose the right grout: It's important to select the correct type of grout for your tiles. There are different types of grout, such as sanded or unsanded, epoxy or cement-based, and they are suitable for different types of tiles and applications. Make sure to read the manufacturer's instructions and consult with your tile supplier before selecting a grout.
Mix the grout properly: Follow the manufacturer's instructions carefully when mixing the grout. Add the water gradually and stir continuously until you achieve a smooth, creamy consistency. Avoid adding too much water, as this can weaken the grout.
Apply the grout with a rubber float: A rubber float is a great tool for spreading the grout evenly and filling the gaps between the tiles. Hold the float at a 45-degree angle and apply the grout in a diagonal motion, making sure to push it firmly into the gaps.
Work in small sections: It's best to work in small sections when grouting, typically 3 to 4 square feet at a time. This will help you to work quickly and avoid the grout drying out before you've had a chance to clean it up.
Clean the excess grout: Once you've applied the grout, use a damp sponge to remove the excess grout from the tiles. Rinse the sponge frequently and avoid wiping too hard, as this can remove the grout from the gaps.
Seal the grout: After the grout has dried, it's important to seal it to protect it from moisture and stains. Use a high-quality grout sealer and follow the manufacturer's instructions carefully.
By following these tips and tricks, you can achieve the best results when grouting tiles and ensure a long-lasting, professional-looking finish.
#TileGroutTips#GroutHacks#GroutCleaningTips#GroutMaintenance#GroutRenewal#GroutSealing#GroutColoring#GroutRestoration#GroutRepairTips#DIYGrouting.
0 notes
Text
Grout color selection: tips for choosing the right grout color for your tiles
Choosing the right grout color for your tiles can make a significant difference in the overall appearance of your tiled surface. Here are some tips to help you select the right grout color:
Consider the tile color: Choose a grout color that complements the color of your tile. If your tile is a neutral color, such as white or beige, you may want to choose a grout color that matches or is slightly lighter or darker than the tile. If your tile is a bold color, consider using a grout color that contrasts with the tile to create a dramatic effect.
Think about the space: Consider the size of the room and the amount of natural light it receives when choosing your grout color. If the room is small or lacks natural light, choosing a light-colored grout can help to brighten the space. If the room is large or has plenty of natural light, you may be able to use a darker grout color without making the space feel too cramped.
Consider the style: Think about the overall style of the room when selecting your grout color. If the room has a modern or minimalist style, a light-colored grout can create a clean and sleek look. If the room has a traditional or rustic style, a darker grout can help to create a warm and cozy atmosphere.
Test it out: Before committing to a grout color, test a small area to see how it looks with your tiles. Grout can dry lighter or darker than the color swatch, so it's important to see how it looks in your specific lighting conditions.
Don't forget about maintenance: Consider the maintenance required for your chosen grout color. Light-colored grout can be more prone to staining and discoloration, so if you don't want to spend a lot of time cleaning your grout, a darker color may be a better choice.
By considering these tips, you can choose the perfect grout color to complement your tiles and enhance the overall look of your tiled surface.
#TileGroutSelection#GroutColorOptions#GroutDecision#GroutMatching#GroutContrast#TileAndGroutCombo#GroutDilemma#GroutSelectionTips#GroutConsiderations#TileDesignChoices#GroutColorTrends#GroutColorPalette
0 notes
Text
Causes of Tile Stains
Tiles can become stained for a variety of reasons, including:
Dirt and grime: Over time, dirt and grime can accumulate on tiles, causing them to look dull and discolored.
Water damage: If tiles are exposed to moisture, they can become stained or discolored. This is particularly common in bathrooms and kitchens where water is often present.
Chemical damage: Certain cleaning products can be harsh on tiles and cause discoloration or damage.
Mold and mildew: Tiles in damp areas are susceptible to mold and mildew growth, which can cause stains and discoloration.
Wear and tear: Heavy foot traffic, furniture movement, and other wear and tear can cause tiles to become scratched and stained over time.
Staining from other materials: Certain substances, such as rust, oil, or paint, can leave stains on tiles that are difficult to remove.
To prevent tiles from becoming stained, it's important to keep them clean and dry, avoid harsh chemicals, and address any water damage or mold growth promptly.
#TileStainRemoval#TileCleaning#StainRemovalHack#DIYTileCleaning#HomeCleaningTips#TileMaintenance#TileCare#TileRestoration#GroutCleaning#FloorRenovation.
0 notes
Text
Tile sizes and shapes: from large format tiles to mosaics
Tiles come in a wide variety of sizes and shapes, each with its own unique characteristics and benefits. Here are some common tile sizes and shapes:
Large format tiles: These tiles are typically larger than 15 inches in length and width. They are becoming increasingly popular due to their modern and sleek look, and their ability to create a seamless and spacious appearance. They can be used on both floors and walls, and are often made of porcelain or ceramic materials.
Subway tiles: These are rectangular tiles that are typically 3 inches by 6 inches in size. They are named after the tiles used in subway stations, and have a classic and timeless look. They can be used in a variety of patterns, including herringbone and stacked, and can be made of ceramic, porcelain, or natural stone materials.
Mosaics: Mosaic tiles are small pieces of tile that are arranged to create a pattern or image. They can be made of a variety of materials, including glass, porcelain, and stone, and are often used as accent tiles or backsplashes. They come in a wide range of shapes and sizes, including square, hexagonal, and penny tiles.
Hexagonal tiles: These tiles have six sides and are often used to create a geometric pattern on floors and walls. They come in a variety of sizes and materials, including ceramic, porcelain, and natural stone.
Penny tiles: These are small circular tiles that are typically less than 1 inch in diameter. They are often used to create a retro or vintage look, and can be made of ceramic, porcelain, or natural stone materials.
Octagonal tiles: These tiles have eight sides and are often used in bathroom floors and walls. They can be made of ceramic or natural stone materials, and can be combined with other shapes and sizes to create a unique pattern.
Ultimately, the size and shape of tiles you choose will depend on your personal style, the overall aesthetic you're trying to achieve, and the practical considerations of the space you're working with.
0 notes
Text
How to choose the right size of tile spacer for your tile project
Choosing the right size spacer is crucial to ensure proper fit and function, but there are several common mistakes that people make when selecting the size of spacers. Here are some of them:
Not considering the thickness of the spacer: When selecting spacers, it's important to consider their thickness, as this will affect the overall distance between the two surfaces. Many people make the mistake of assuming that all spacers of the same size are created equal, but thickness can vary greatly depending on the material and manufacturing process.
Not measuring the space accurately: Another common mistake is not measuring the space accurately. It's important to measure the distance between the two surfaces precisely, as even a small discrepancy can cause problems with the fit and function of the spacer.
Not considering the weight and load capacity: Spacers also need to be able to support the weight and load of the objects they are separating. If the spacer is too thin or weak, it may not be able to withstand the pressure and can break or fail.
Using the wrong material: Choosing the right material for the spacer is also important. The material should be strong enough to support the weight and load, and also resistant to corrosion or damage from environmental factors such as moisture or heat.
Overlooking compatibility with the rest of the components: Spacers may need to be compatible with other components, such as bolts or screws, and it's important to make sure that the spacer size is appropriate for the rest of the components used in the assembly.
To avoid these common mistakes, it's essential to take the time to measure and consider all of the factors involved in selecting the right size spacer for your specific application.
#TilingTools#TilingAccessories#PrecisionTiling#PerfectTileSpacing#AccurateTileInstallation#TileSpacerSize#RightSizeTileSpacers.
0 notes
Text
Tile cleaning products and their effectiveness
There are many tile cleaning products available on the market, and their effectiveness can vary depending on the type of tile, the level of dirt and grime, and the specific product used. Here are some common types of tile cleaning products and their effectiveness:
All-purpose cleaners: These are versatile cleaners that can be used on a variety of surfaces, including tile. They are generally effective at removing light to moderate dirt and grime, but may not be as effective for tough stains.
Acidic cleaners: These cleaners contain acid, such as phosphoric or hydrochloric acid, and are specifically designed for removing tough stains like rust, mineral deposits, and hard water stains. They can be effective for removing these types of stains, but they should be used with caution and according to the manufacturer's instructions, as they can be harsh and potentially damage the tile.
Enzyme cleaners: These cleaners contain natural enzymes that break down organic materials like food, grease, and urine. They are effective for removing these types of stains and can be a good choice for households with pets or young children.
Steam cleaners: These cleaners use high-temperature steam to loosen and remove dirt and grime from tile and grout. They are generally effective for deep cleaning and sanitizing tile, but may not be as effective for removing tough stains.
Abrasive cleaners: These cleaners contain abrasive materials, such as baking soda or pumice, that help to scrub away tough stains and grime. They can be effective, but should be used with caution, as they can scratch the tile surface if not used properly.
Ultimately, the effectiveness of a tile cleaning product will depend on the specific product used, as well as the condition of the tile and the level of dirt and grime present. It's important to read the manufacturer's instructions carefully and choose a product that is appropriate for the type of tile you have and the type of stains you need to remove.
#SparklingTiles#NoMoreStains#DeepCleanTiles#TileRefresh#ShowerTiles#PorcelainTiles#CeramicTiles#NaturalStoneTiles.
0 notes
Text
How to maintain the longevity in Tiles?
Maintaining longevity in tiles requires regular cleaning and maintenance. Here are some tips to help you keep your tiles looking new for years:
Sweep and vacuum regularly: Dirt, dust, and debris can accumulate on tiles and cause damage over time. Regular sweeping and vacuuming can help prevent this from happening.
Use mild cleaners: Harsh cleaners can damage the grout and tiles over time. Instead, use mild cleaners that are specially formulated for tiles. Avoid using vinegar and other acidic cleaners as they can damage the grout and etch the surface of some tiles.
Clean up spills immediately: Spills can stain the grout and tiles if left unattended. Clean up spills immediately with a soft cloth and mild cleaner.
Avoid using abrasive cleaners: Abrasive cleaners can scratch the surface of tiles, especially if they have a high gloss finish. Use a soft brush or sponge instead of abrasive cleaners.
Seal the grout: Grout is porous and can absorb dirt and moisture, leading to stains and mold growth. Sealing the grout can help prevent this from happening and make it easier to clean.
Use rugs and mats: Place rugs and mats in high-traffic areas to protect the tiles from wear and tear. Make sure to clean them regularly to prevent dirt and debris from accumulating underneath.
Be careful when moving heavy objects: Heavy objects can scratch and damage tiles, especially if they are dragged across the floor. Use furniture sliders or lift heavy objects instead of dragging them.
By following these tips, you can help maintain the longevity of your tiles and keep them looking new for years to come.
#LongevityInTiles
#TileMaintenance
#TileCare
#TileLongevityTips
#MaintainingTiles
#TileCleaning
#TileProtection
#TileDurability
#TilePreservation
#TileMaintenanceTips
0 notes
Text
How to get an accurate professional finish, before installation of Tiles?
The one and only solution by using Tiles Spacer
Tile Spacer are placed between the tiles before installation to create a consistent gap that allows for the proper application of grout, which fills the gaps between the tiles and helps to secure them in place that also gives an ACCURATE PROFESSIONAL FINISH
0 notes
Text
Benefits of Low Absorbent Tiles
Low absorbent tiles, also known as non-porous tiles, offer a range of benefits for various applications. Here are some of the main benefits of using low absorbent tiles:
Stain Resistance: Low absorbent tiles are highly resistant to staining as they don't absorb liquids, which makes them easy to clean and maintain.
Durability: These tiles are durable and long-lasting, which makes them ideal for high traffic areas such as commercial buildings, hospitals, schools, and shopping malls.
Hygiene: Non-porous tiles are hygienic as they do not absorb moisture and bacteria, which makes them a great choice for areas where cleanliness and hygiene are crucial, such as hospitals, clinics, and laboratories.
Slip Resistance: Low absorbent tiles are often designed with slip-resistant features that make them suitable for use in areas that are prone to water or other liquid spills.
Versatility: These tiles come in a variety of colors, styles, and textures, which makes them a versatile choice for interior and exterior applications, such as flooring, walls, countertops, and pool decks.
Low Maintenance: Low absorbent tiles require minimal maintenance, and they do not need to be sealed regularly like porous tiles. This means that they are more cost-effective in the long run.
Eco-friendly: Some low absorbent tiles are made from recycled materials, making them an eco-friendly choice for those who want to reduce their carbon footprint.
Overall, low absorbent tiles are a practical and versatile choice for a wide range of applications, offering a range of benefits that make them an ideal option for many settings.
#lowabsorbenttiles#nonabsorbenttiles#waterresistanttiles#moistureresistanttiles#staintiles#easytocleantiles#highperformancetiles#lowporositytiles#durabletiles#longlastingtiles
0 notes
Text
One of the reason why do Tiles have cracks?
Laying tiles traditionally with a sand cement mix can sometimes result in tiles breaking if certain factors are not taken into consideration or if the process is not done correctly. Here are some possible reasons why this might happen:
Incorrect mixing: The sand and cement need to be mixed thoroughly and in the right proportions to create a strong adhesive. If the mixture is too dry or too wet, it can compromise the strength of the bond and cause the tiles to crack or break.
Inadequate surface preparation: The surface where the tiles are being laid needs to be clean, dry, and free from any debris or contaminants that could interfere with the bonding process. If the surface is not properly prepared, the adhesive may not bond well, leading to breakage.
Improper trowel technique: When spreading the adhesive onto the surface, it's important to use the right trowel technique. Using too much pressure or not spreading the adhesive evenly can cause air pockets to form underneath the tiles, leading to breakage.
Inadequate curing time: After the tiles have been laid, they need time to dry and cure properly. If the tiles are walked on or disturbed before the adhesive has had enough time to dry and cure, it can cause the tiles to shift and crack.
Poor quality tiles: Sometimes, the problem may not be with the installation process but with the tiles themselves. Low-quality tiles or tiles that are uneven in thickness or size can be more prone to breakage, even when installed correctly.
To avoid tile breakage, it's important to follow the proper installation procedures and to use high-quality materials. If you're unsure about how to lay tiles, it may be best to hire a professional to do the job.
#CrackedTiles#TileCracks#TileDamage#TileRepair#TileMaintenance#DIYTileFix#TileReplacement#TileRenovation#HomeImprovement#TileCare.
0 notes
Text
Harmful Additives in Tiles
Tiles are made from a variety of materials, including ceramic, porcelain, stone, glass, and metal, and each type of tile may have different additives or chemicals used in their production.
While most tiles are generally safe, there are some potential harmful additives that may be used in the production of certain types of tiles.
One potential harmful additive that may be used in the production of ceramic and porcelain tiles is lead. Lead is a toxic substance that can cause serious health problems if ingested or inhaled, particularly in children and pregnant women. However, in many countries, lead is no longer used in the production of tiles due to its health risks.
Another potential harmful additive that may be used in the production of some types of tiles is asbestos. Asbestos was once a common additive in building materials, including tiles, due to its fire-resistant properties. However, asbestos has been linked to serious health problems, including lung cancer and mesothelioma, and its use in building materials has been banned in many countries.
#ToxicTileAdditives#HarmfulChemicalsInTiles#UnsafeTileMaterials#CarcinogenicTileAdditives#VolatileOrganicCompoundsInTiles#LeadInTiles#AsbestosInTiles#MercuryInTiles#FormaldehydeInTiles#PhthalatesInTiles
0 notes