#tubetape

[tubetape]

Save Time – Automotive masking solution, Tube Tape saves 20, even 30 minutes per car.

Tube Tape is a new, time-saving automotive masking tape that can help you save time and money on your next painting project. This unique tape is made from a flexible foam core that can be shaped to fit any gap or opening. This makes it perfect for masking off areas that are difficult to reach with traditional masking tape.

Here are just a few of the ways that Tube Tape can save you time:

Pops right in (or on): Tube Tape is pre-shaped and ready to use. No need to cut or shape the tape to fit.

Flexes to fit all shape gaps without adjustment – even sharp corners: Tube Tape's flexible foam core makes it easy to get a perfect fit around any curve or corner.

Goes on in just one step: No need to "wet down" the glue. Tube Tape is pressure-sensitive and will stick to any surface.

Sticks until you remove it: Tube Tape is made from a high-quality adhesive that will hold up to the toughest conditions.

No special removal technique required: Tube Tape comes off easily and without leaving any residue behind.

Sticks to all surfaces – metal, glass, rubber, plastic, EPDM rubber moldings: Tube Tape can be used on a variety of surfaces, including metal, glass, rubber, plastic, and EPDM rubber moldings.

Repositions in seconds; no need to start over: Tube Tape can be repositioned as needed without leaving any residue behind. This means that you can make adjustments without having to start over.

Fits any size gap: Tube Tape comes in two sizes, and doubles up for wide gaps, foam core slides out for narrow ones. This means that Tube Tape can be used to mask off any size gap.

No rubbery, baked-on oven residue to scrape away – heat-resistant up to 250º for up to 30 minutes: Tube Tape is heat-resistant up to 250º for up to 30 minutes. This means that you can use Tube Tape in the oven without worrying about it leaving any residue behind.

Comes off as easily as it goes on: Tube Tape comes off easily and without leaving any residue behind.

No adhesive residue to clean off: Tube Tape is made from a high-quality adhesive that will not leave any residue behind. This means that you can clean up quickly and easily.

Round shape naturally feathers edges, so you can touch up missed spots without having to repaint whole panels: Tube Tape's round shape helps to feather the edges of the paint, so you can touch up missed spots without having to repaint whole panels.

No release paper to wrestle with: Tube Tape comes with a release paper that is easy to remove. This means that you can get started quickly and easily.

Conclusion

Tube Tape is a revolutionary new automotive masking tape that can help you save time and money on your next painting project. This unique tape is easy to use, sticks to any surface, and comes off easily without leaving any residue behind.

For more info:

Please visit the Tube Tape website: https://www.tubetape.works/what-it-is

#automotive masking tape #carpainting #large tube tape #automotivemaskingtape #tubetape

[tubetapework-blog]

Automotive Masking Solution – mask your car door, hood, or trunk fast & easily by tube tape. 

#automotive masking solution #TubeTape #automotive aperture tape

[edwonaa]

[SALE!] $249.99 Revox G36 Reel to Reel tubeTape Recorder & ORIGINAL SERVICE MANUAL 2 speed BUY NOW! #TapeRecorder, #ReelToReelTapeRecorder, #VintageRecorder

#TapeRecorder #ReelToReelTapeRecorder #VintageRecorder

[rabbistevegindi]

Mask Cars Faster with TubeTape - Buy Now

Mask Cars Faster with TubeTape – Buy Now

View On WordPress

[tubetape]

Tube Tape vs. Foam Tape

Whether you're a professional painter or a DIY enthusiast, masking tape is an essential tool for achieving clean, precise paint lines. But with so many different types of tape on the market, it can be tough to decide which one is right for the job. Two popular options are tube tape and foam tape. In this blog post, we'll compare the two tapes to help you decide which one is right for your needs.

Tube Tape

Tube tape is a type of masking tape that is made from a soft, flexible foam core. The tape is applied by simply sticking it in place. The adhesive is strong enough to hold the tape in place, but it is also easy to remove without leaving any residue. Tube tape is a good choice for applications where you need a soft, flexible edge, such as when painting around curves or corners.

Pros

Leaves a soft edge

Easy to apply

Easy to remove

Does not leave adhesive residue

Cons

More expensive than foam tape

Not as good for filling gaps

Foam Tape

Foam tape is another type of masking tape that is made from a foam core. However, foam tape is typically oval-shaped, while tube tape is round. Foam tape is also applied by sticking it in place. However, after the tape is applied, it is necessary to "wet out" the glue. This means applying a thin layer of water to the glue to activate it. Foam tape is a good choice for applications where you need a strong, durable tape that will not fall off, such as when masking off large areas.

Pros

Strong, durable tape

Will not fall off

Good for filling gaps

Cons

Can be difficult to apply

Can leave adhesive residue

More expensive than tube tape

Conclusion

So, which type of tape is right for you? If you need a soft, flexible edge, tube tape is the way to go. If you need a strong, durable tape that will not fall off, foam tape is a better choice. Ultimately, the best way to decide is to try both types of tape and see which one you prefer.

For more info: https://www.tubetape.works/vs-foam-tape

#automotive masking tape #carpainting #large tube tape #carmaskingtape #tubetape #maskingtape

[tubetape]

Tube Tape vs. Back Tape: A Comprehensive Comparison

In the world of automotive painting, there are two main methods for masking off areas that don't need to be painted: tube tape and back tape. Both methods have their own advantages and disadvantages, and the best choice for a particular job will depend on the specific situation.

Tube Tape

Tube tape is a pre-formed, round tape that is applied to contours and gaps. It is easy to apply and can be repositioned in seconds. Tube tape also flexes to fit sharp corners and feathers naturally for touch-up painting.

Advantages of Tube Tape:

Takes half the time of back taping

Proper installation requires little training

Round shape to fit contours, fill gaps

Goes on in 1 step

Repositions in seconds

Flexes to fit contours, even sharp corners

Round shape naturally feathers edges for touch-up painting

Disadvantages of Tube Tape:

Can be more expensive than back tape

Not as strong as back tape

Back Tape

Back tape is a flat, roll-on tape that is applied to flat surfaces. It is strong and durable, but it can be more difficult to apply and may require shaping and folding to fit curves.

Advantages of Back Tape:

Strong and durable

Less expensive than tube tape

Can be used on flat surfaces

Disadvantages of Back Tape:

Takes 2X longer than tube tape to apply

Proper installation requires experienced painter or prep man

Flat shape can leave hard edges

Goes on in 3 steps per gap

Often needs redoing

Which Method is Right for You?

The best method for masking off areas that don't need to be painted will depend on the specific situation. If you are masking off a large area with many contours, tube tape is a good choice. If you are masking off a small area with flat surfaces, back tape is a good choice.

For more info: https://www.tubetape.works/vs-back-tape

#automotive masking tape #large tube tape #carmaskingtape #tubetape #carpainting

[tubetape]

How Tube Tape saves 15, 20, maybe even 30 minutes per car

Tube Tape was invented for an art teacher, then tested and perfected in body shops like yours. When public school art teacher Denise Moore’s fingers started aching from making hundreds of masking-tape loops for hanging students’ artwork on the walls, her inventor husband Leo came up with a way to form the tape into tubes.

One day, a friend who owned a car painting business saw Leo making the tape in his shop and exclaimed, “I’ve been looking everywhere for something like this. It would be great for masking cars!” In 2015, after years of experimentation with diameters, tapes (ending in the choice of 3M™ High Performance Green Masking Tape 401+), the foam core, and how to package very sticky tape without release paper, Tube Tape was born.

Body shop painters throughout the Richmond area tested it every step of the way, and their opinions and feedback helped us turn Tube Tape into a product that body shops like into one they need – one that they reported saves 15, 20, maybe even 30 minutes of masking time per car, with excellent paint finishes.

If you're looking for a way to save time and money, Tube Tape is the perfect solution. It's a fast, easy, and affordable way to seal and protect your car's body panels.

How it works

Tube Tape is a flexible, adhesive tape that conforms to the shape of your car's body panels. It can be used to seal up gaps, cracks, and holes, and to protect your car from the elements.

The benefits of using Tube Tape

Saves time: Tube Tape can be applied in just one step, and there's no need to "wet down" the glue. This can save you up to 30 minutes per car.

Easy to use: Tube Tape is flexible and can be repositioned as needed. There's no need to start over if you make a mistake.

Sticks to all surfaces: Tube Tape sticks to metal, glass, rubber, plastic, and EPDM rubber moldings.

Heat resistant: Tube Tape is heat resistant up to 250º for up to 30 minutes. This makes it perfect for protecting your car's body panels from the heat of the engine.

Easy to remove: Tube Tape comes off as easily as it goes on. There's no need to scrape away any adhesive residue.

Additional benefits of using Tube Tape

Prevents rust and corrosion: Tube Tape can help to prevent rust and corrosion by sealing up gaps and cracks that allow moisture to enter.

Protects against scratches and dents: Tube Tape can help to protect your car's body panels from scratches and dents by providing a layer of protection.

Improves the appearance of your car: Tube Tape can help to improve the appearance of your car by covering up gaps and cracks.

See for yourself

See for yourself how much time Tube Tape can save you. Watch the videos on the Tube Tape website to learn more.

Conclusion

Tube Tape is a fast, easy, and affordable way to save time and money. It's the perfect solution for anyone who wants to protect their car's body panels.

For more info: https://www.tubetape.works/what-it-is

#automotive masking tape #carpainting #tubetape #carmaskingtape #maskingtape

[tubetape]

Common Mistakes to Avoid When Using Automotive Masking Tape

Automotive masking tape is an essential tool for any car painter or body shop technician. It is used to protect areas of a car that should not be painted, such as trim, moldings, and windows. It can also be used to create sharp lines and edges on a paint job.

However, if not used properly, automotive masking tape can cause problems, such as overspray, lifting paint, and damaging the surface of the car. Here are some common mistakes to avoid when using automotive masking tape:

Mistake 1: Using the wrong masking tape

There are several different types of automotive masking tape available, each with its own unique properties. Some tapes are designed for delicate surfaces, while others are designed for high-heat applications. It is important to choose the right tape for the job.

If you choose the wrong type of tape, it can lead to problems such as:

Overspray: Overspray is when paint gets onto areas of the car that you want to keep paint-free. This can happen if the tape does not adhere properly to the surface or if it is not applied correctly.

Poor adhesion: Poor adhesion is when the tape does not stick properly to the surface. This can happen if the surface is not clean or if the tape is not applied correctly.

Lifting paint: Lifting paint is when the tape removes the paint when it is peeled off. This can happen if the tape is not removed carefully or if it is left on the surface for too long.

Mistake 2: Not applying the tape properly

Applying automotive masking tape properly is essential to achieving a good paint job. Here are some tips for applying tape properly:

Clean the surface: Before applying the tape, make sure the surface is clean and dry. This will help the tape adhere properly to the surface.

Apply the tape smoothly: Do not stretch or wrinkle the tape when applying it. This can make it difficult to remove the tape after painting.

Overlap the tape: When applying multiple strips of tape, make sure to overlap them by at least 1/2 inch. This will help to prevent paint from bleeding under the tape.

Use a burnisher: A burnisher is a tool that can be used to smooth out the edges of the tape. This will help to prevent paint from bleeding under the tape.

Mistake 3: Cutting the tape incorrectly

Cutting automotive masking tape incorrectly can result in jagged edges and frayed tape. This can make it difficult to apply the tape properly and can also cause paint to bleed under the tape.

To cut automotive masking tape correctly, you should use a sharp pair of scissors or a razor blade. Make sure to cut the tape straight and evenly.

Mistake 4: Removing the tape too forcefully

Removing automotive masking tape too forcefully can cause the paint to lift off. This can happen if the tape is removed too quickly or if it is pulled at a sharp angle.

To remove automotive masking tape safely, you should peel it off slowly and carefully. You should also peel the tape at a 45-degree angle.

Mistake 5: Reusing masking tape excessively

Reusing automotive masking tape excessively can weaken the adhesion of the tape and cause residue to build up on the surface of the car. This can make it difficult to apply the tape properly and can also damage the surface of the car.

In general, it is best to use fresh automotive masking tape for each job. However, if you must reuse the tape, make sure to clean it off thoroughly before using it again.

By avoiding these common mistakes, you can ensure that you get a good paint job and that you do not damage the surface of your car.

For more info: https://www.tubetape.works/what-it-is

#automotive masking tape #maskingtape #carpainting #cars #tubetape

[tubetape]

Automotive Masking Tape For Car Painting

Automotive masking tape is specifically designed for automotive applications, providing excellent adhesion and clean removal without leaving any residue. In this blog post, we will explore the benefits of using automotive masking tape for car painting and provide some tips on how to effectively use it.

Benefits of Automotive Masking Tape

Superior Adhesion

Auto masking tape is designed to adhere firmly to various surfaces, including metal, plastic, and glass.

It provides a secure hold, preventing any paint bleed or seepage.

Clean Removal

Auto masking tape can be easily removed without leaving any residue or damaging the underlying surface.

This makes it ideal for masking off delicate areas or intricate designs.

Precision and Accuracy

The sharp edges of auto masking tape allow for precise and clean lines, ensuring a professional finish.

It can be easily cut and shaped to fit any contour or curve on the car's surface.

Tips for Using Automotive Masking Tape

Surface Preparation

Before applying automotive masking tape, ensure the surface is clean, dry, and free from dust or debris.

Use a mild solvent or cleaner to remove any grease or wax that may affect the tape's adhesion.

Proper Application

Start by applying the tape to the desired area, ensuring it is firmly pressed down to achieve a secure bond.

Use a plastic or rubber squeegee to smooth out any air bubbles or wrinkles in the tape.

Removing the Tape

When the paint is dry to the touch, gently remove the tape at a 45-degree angle to avoid any paint lifting or tearing.

If any residue is left behind, use a mild adhesive remover or rubbing alcohol to clean the surface.

Conclusion

Automotive masking tape is essential for achieving clean and precise lines in car painting. Its superior adhesion, clean removal, and ability to provide precision and accuracy make it a must-have for any automotive painting project. By following the tips mentioned in this blog post, you can ensure that you get the best results when using automotive masking tape.

For more info: https://www.tubetape.works/

#automotive masking tape #carpainting #maskingtape #carmaskingtape #large tube tape #tubetape

[tubetape]

Is Automotive Masking Tape the Same as Regular Masking Tape?

Automotive masking tape and regular masking tape are both used to protect surfaces from paint, but there are some key differences between the two.

Automotive masking tape is made from a stronger material than regular masking tape. This makes it more durable and less likely to tear, which is important when you are using it to mask large areas or in areas that are exposed to a lot of wear and tear. Automotive masking tape is also designed to be more heat-resistant, which makes it ideal for use in automotive painting applications.

Regular masking tape is made from a less expensive material and is not as durable or heat-resistant as automotive masking tape. However, it is still a good choice for general-purpose masking applications, such as masking windows or doors before painting.

#automotive masking tape #maskingtape #tubetape #large tube tape #carpainting #cars

[tubetape]

Tips for Using Automotive Masking Tape

Automotive masking tape is specifically designed for automotive applications, providing excellent adhesion and clean removal without leaving any residue. Here are some tips for using automotive masking tape:

Surface Preparation

Ensure that the surface is clean, dry, and free from any dust or debris. This is important to ensure that the tape will adhere properly to the surface and create a clean, sharp edge. Any dirt or debris on the surface can cause the tape to peel or lift, resulting in a poor paint job.

Use a mild solvent or cleaner to remove any grease or wax that may affect the tape's adhesion. Grease and wax can also prevent the tape from adhering properly. A mild solvent, such as rubbing alcohol, can be used to remove these substances.

Proper Application

Start by applying the tape to the desired area, ensuring it is firmly pressed down to achieve a secure bond. The tape should be applied in a smooth, continuous motion to avoid any air bubbles or wrinkles.

Use a plastic or rubber squeegee to smooth out any air bubbles or wrinkles in the tape. This will help to ensure that the tape is applied evenly and that there are no gaps or imperfections.

Removing the Tape

When the paint is dry to the touch, gently remove the tape at a 45-degree angle to avoid any paint lifting or tearing. Pulling the tape straight off can cause the paint to lift or tear, so it is important to remove it at an angle.

If any residue is left behind, use a mild adhesive remover or rubbing alcohol to clean the surface. This will help to remove any leftover adhesive and leave the surface clean and smooth.

Here are some additional tips for using auto masking tape:

Use a high-quality tape that is designed for automotive use. This will help to ensure that the tape will adhere properly and last for the duration of the painting project.

Use the right width of tape for the job. A wider tape will provide a cleaner edge, but it may be more difficult to apply. A narrower tape is easier to apply, but it may not provide as clean of an edge.

Be patient and take your time when applying the tape. This will help to avoid any mistakes or imperfections.

By following these tips, you can ensure that you use auto masking tape properly and get the best results possible.

For more info: https://www.tubetape.works/

#automotive masking tape #large tube tape #maskingtape #carpainting #cars #tubetape

[tubetape]

Is automotive masking tape the same as masking tape?

No, automotive masking tape is not the same as masking tape. Automotive masking tape is specifically designed for use on cars and other vehicles, while masking tape is a more general-purpose tape. Automotive masking tape has a number of features that make it ideal for use on vehicles, including:

High-temperature resistance: Automotive masking tape is made from a high-quality paper backing and a strong adhesive that is designed to withstand high temperatures. This makes it ideal for use in automotive painting, where the vehicle may be subjected to high temperatures in a spray booth. The high-temperature resistance of automotive masking tape prevents the tape from melting or coming loose during the painting process. This helps to ensure that the paint job is smooth and even.

Adhesive that won't damage paint: The adhesive used in automotive masking tape is designed to not damage car paint, even when it is removed after a long period of time. This is important because it allows the painter to apply the tape to the car and then remove it without damaging the paint. The adhesive used in automotive masking tape is also clear, so it does not obscure the underlying surface.

Tear resistance: Automotive masking tape is tear-resistant, so it can be applied to curved surfaces without tearing. This is important because cars are often curved, and the masking tape needs to be able to conform to the shape of the car without tearing. The tear-resistance of automotive masking tape also makes it easier to apply the tape to the car without damaging the paint.

Clarity: Automotive masking tape is clear, so it will not obscure the underlying surface. This is important because it allows the painter to see the underlying surface while they are painting. This leads to more accurate and consistent paint applications. The clarity of automotive masking tape also makes it easier to remove the tape without damaging the underlying surface.

Masking tape is not designed for use on vehicles and does not have the same features as automotive masking tape. Masking tape is typically used for general-purpose tasks, such as masking off areas before painting or wallpapering. It is not as resistant to high temperatures as automotive masking tape, and it may damage car paint if it is not removed carefully.

If you are planning to paint your car, it is important to use automotive masking tape. This will help to protect your car's paint and ensure that the paint job is smooth and even. If you are using masking tape for other purposes, such as masking off areas before painting or wallpapering, you can use regular masking tape. However, be sure to remove the tape carefully to avoid damaging the underlying surface.

For more info: https://www.tubetape.works/what-it-is

#automotive masking tape #tubetape #large tube tape

[tubetape]

Find a comparison of cylindrical tube tape with masking car back tape. Tube tape is the right choice to buy online in Richmond.

#tubetape #backtape

[tubetapework-blog]

Automotive Masking Solution - TubeTape Original Tube Tape has a 3/8" outer diameter with a 1/4" diameter removable foam core. There are 160 feet of Tube Tape in this 40-tube box. Original Tube Tape works well with modern vehicles' tighter jambs . It can also be used to fill larger gaps by putting two pieces back-to-back.

#Automotive Masking Solution

[tubetapework-blog]

TapeTape - Save More Time in Car Masking Flexes to fit all shape gaps without adjustment even sharp corners that help you to saves 15, 20, maybe even 30 minutes per car. for more information you can also go for TubeTape.