Tumgik
pumpcontroller · 3 years
Text
save water and save electric with automatic pump controller
This is a float valve. And if you have an overhead water storage tank like ours, installing this will make your life so much easier because it can stop overflow for good and you won't need a ladder ever again. I'll explain why and I'll show you how, in a bit. Hey there! This is and if we're just meeting for the first time, HELLO! And my passion is building, fixing, and improving all sorts of stuff at home for my family and sharing with you what I have learned from experience and from others. For the longest time we have endured with this setup where every time we needed to store water, we had to climb a ladder up and down just to reach and turn on a faucet and do it again to turn it off. And yeah, there were many times we had overflows because we were too busy doing something else to monitor the rising water level from start to finish. So today, we're going to do something about that by replacing this hideous faucet with this float valve I purchased online, which will serve as our automatic water level controller. You basically have an inlet here where water comes in and flows out to this spout.
Tumblr media
Know More This Product Click Here!
And you have a plastic ball here -- in this case, a cylinder -- that's filled with air. It is attached to an arm that has a valve on the other end which opens or seals the spout, depending on the angle of the arm. As you already know, gas is lighter than liquid. So the idea is: as water rises, it pushes the ball and the air inside it upwards and in turn moves the valve on the other end to slowly seal the spout shut. Conversely, whenever we consume from this tank and water goes downwards, the ball also goes down, opening the valve and once again adding in more water. It also comes with a pivot point with a wingnut. Loosen the nut to adjust the arm to a desired angle which will control how much water it will allow in before it completely seals the spout. If you want to go high-tech there are also electric float switches sold out there but personally, I prefer float valves because they are mechanical, simple to install, and obviously don't require any constant power source and wiring. As much as possible, I like to keep my water and electricity far apart.
Know More This Product Click Here!
0 notes
pumpcontroller · 3 years
Text
How to set up your Home so it waters itself
The best time to water the home in summer is in the early morning between four and six o’clock. That’s when the soil has cooled down well after the night and hardly any water will be lost through evaporation.
But if you find the prospect of setting an early alarm every day a bit irksome, technology can help.
An automatic home watering system will turn the tank and controller on and off by itself. It can even detect whether rain is expected in the next few hours, and limit the water supply accordingly.
Tumblr media
Those who don’t feel like lugging around a heavy watering can can have their home watered by automatic systems. Photo: Benjamin Nolte/dpa
Is my home too small?
An water control system can make sense for homes with an area of 200sq m upwards. The larger the home and the lawn, and the more beds, shrubs and plants there are, the more advisable an automatic system is.
Otherwise you would have to stand in the garden for hours to water it properly, says Michael Henze from Germany’s Garden, Landscape and Sports Ground Construction Association.
“It is better to water less frequently, but more abundantly. Then the water will also reach deep roots.”
If you want a high-tech garden, you can even set up sprinklers that can be controlled on your mobile phone. Photo: Karl-Josef Hildenbrand/dpa
Are they difficult to install?
First of all, garden owners need to be clear about which plants they want to water and in which places. “The most important thing is to have a watering plan,” says Henze. “You can often draw one up online on the manufacturers’ websites.” Professionals may also be called in to help.
It’s important to know the distance from your water source to the plants. You should also establish which plants need a heavy supply, and which will thrive with drip irrigation.
“You need to know how strong the pump and the garden water pipe are, and how many litres pass through per hour,” says Juergen Herrmannsdoerfer, from the German Association of Retail Gardeners.
This will help you to calculate how many sprinklers and valves you can connect to the pipe, irrespective of whether the irrigation is controlled by a timer or an app.
Tumblr media
Plug-in irrigation systems can supply water to bedding plants, but also to individual pots. Photo: Simone A. Mayer/dpa
Do the hoses have to be buried underground?
It is not always worthwhile to lay your hoses deep under the ground. Drip hoses or pipes work better on or near the surface, covered with a small layer of mulch, according to Herrmannsdoerfer. This, he says, will protect them from sunlight and reduce evaporation. “The distribution pipes are usually laid 20–40cm under the soil surface, so they’re not in the way.”
What do you need in addition to the garden hoses?
“For the simplest watering system a timer that is mounted between the water connection and the garden hose is sufficient,” says Henze.
The timer regulates the flow through a valve. This allows you to set when and for how long to water, for example every 12 hours for 30 minutes. Or one hour every three days.
A simple watering computer with several programmes works in a similar way. You can set weekdays and weekends, for example, or set different schedules for different parts of the garden.
A sensor can help to target the plants more precisely. “It measures the soil moisture and sends corresponding signals to the control centre,” says Herrmannsdoerfer. “After heavy rainfall the water only comes on again when the set value is reached.”
Some plants need a lot of water, others not much. With many automatic waterers, you can finetune the amount to each plant’s needs. Photo: Roland Weihrauch/dpa
Is a smart irrigation system right for you?
Smart systems act largely independently. “An irrigation controller is connected directly to the water tap, which opens and closes the valve,” says smart home specialist Sebastian Kloess.
To do this, the controller receives instructions from the central unit, which processes information from various sources — for example, from moisture, temperature or light sensors.
“It calculates how much watering is needed for you,” explains Kloess. Robotic mowers can also be integrated into the system — they will only start working when the lawn is not too wet. All this can be operated via a mobile phone or tablet.”
If you want to control the irrigation in the home remotely, you have to connect the control centre to the Internet via a router instead of via WLAN. This will enable you to include external weather data. — dpa
0 notes
pumpcontroller · 3 years
Text
Semi Automatic Water Level Controller
Sub Type: Single Phase/Three Phase Pump/Submersible Pump/Without Capacitor/With Capacitor Panel/MCB Type
It start motor by pressing start button of the device and it will automatically switch off motor when the tank full.
Tumblr media
Buy Now
Item Specifications :
A brand new unused, undamaged item that is fully operational and functions as intended
Device ON, Motor ON/OFF, Tank full, Tank empty indication provided.
Dry run protection
Warranty: 1 Year Manufacturer
Warranty Service: Repair or Replacement
Operating Voltage: 180V — 270V AC
Output Load Capacity: 0.1 HP Up to 7.0 HP
Size: 65*55*170(W*D*H) mm
0 notes
pumpcontroller · 3 years
Text
Digital Time Switch / Digital Timer DT-04
Digital Time Switch is ideal for street light, glow sign board, garden light, staircase light, motor pump set.
Tumblr media
Buy Now
Features:
Auto / Manual Mode
Clock Setting (Real Time)
Time Settings
Hour Adjustment
Min Adjustment
Hard Reset Switch (Press for 10 Sec)
Specifications:
Real Time Clock Based Programmable Timer
Direct Output Control
Load Capacity: 3K Watt (Resistive)
Up to 4 Programs (in 24Hrs)
Operating Voltage (180–250 VAC)
Buy Now
0 notes
pumpcontroller · 3 years
Text
Auto Pump Cut Off Controller
You have to start motor by pressing start button of the panel and it will automatically switch of motor when the tank full.
Sub Type: Single Phase/Single Phase Submersible/Capacitor Panel
Tumblr media
Know More
Item Specifications :
A brand new unused, undamaged item that is fully operational and functions as intended
Device ON indication provided.
Warranty: 1 Year Manufacturer
Warranty Service: Repair or Replacement
Operating Voltage: 180V — 270V AC
Output Load Capacity: 0.1 HP Up to 5.0 HP
Size: 50*40*120(W*D*H) mm
Know More
0 notes
pumpcontroller · 3 years
Text
Water Level Indicator / Buzzer
This device will help you to understand how much level of water inside the tank. Then you can controll your water pump as per your requirement water.
Package Contain
1 Water Level Indicator Unit.
7 Carbon Sensors.
1 pack, mounting screw.
1 user manual with technical details.
Tumblr media
Read More
Product Descriptions:
This water level indicator comes with 7 sensor. Put all 7 sensors inside tank as shown in diagram.
As shown in diagram G is comon sensor. when water touch to “1” sensor, Level 1 LED glow. When water touch to “2” sensor, Level 2 LED glow. and so on… up to 6 level.
It is able to indicate upto 6 different level of the tank.
High quality ABS enclosure.
compact size.
Supply voltage : 220–270 V AC.
Sensing Elements: Carbon sensors, it is free from oxidation. Long life. Any conducting wire can be use for sensor.
Salient Features : Save electricity. Long service Life. Easy install. Sturdy construction. Efficient operation.
Read More
0 notes
pumpcontroller · 3 years
Text
Single Tank Automatic water level pump Controller Monitoring System
Versatile, reliable and ideal for homes, multi storey building, housing complex, hotels, office buildings and industries.
We are the leading ‘automatic water level controller’ manufacturer, distributor & whole seller. We’ve helped thousands of customers from businesses to business as well as business to retail. We’re proud to have built a strong relationship for great prices, great selection, and great quality products. Automatic water level controller buying expertise allows even
the smallest company or individual to enjoy the competitive pricing. We ‘automatic water level controller’ have gained
success in the market by Manufacturing & Whole selling like Water Level Controller, Motor Starter, Water Level Indicator, Digital Time Switch, etc. Our offered products are manufactured in compliance with the pre-defined industry
norms and tested to ensure their flawlessness. We guarantee what we sell. We only sell high-quality and reliable products and are committed to exceeding all industry standards.
https://www.automaticwaterpumpcontroller.com/
Tumblr media
Features:
Auto /Semi Auto/Manual
Dry Run Protection
Corrosion Free Sensors
Suitable for Single Phase /Three
Phase Pump/Submersible Pump
Visual Indications
Advanced Embedded Technology
SAVE WATER/ ELECTRICITY
Compact Size
User Friendly
Easy Installation
Zero Maintenance
Specifications :
Operating Voltage: 180V — 270V AC
Output Load Capacity: Up to 2HP
Size: 65*55*170(W*D*H) mm
High/Low Voltage. Protection(Optional)
0 notes
pumpcontroller · 3 years
Text
Automatic water pump controller price in kolkata
Our ‘Automatic Water Pump Controller’ is suitable for Single Phase / MCB type switch / DOL Starter / Capacitor Panel / Three phase motor. Automatic Water Pump Controller monitors liquid level of the overhead tank as well as reservoir. Automatic pump controller controls water pumps and turns it ON and OFF with respect to the level of water. This auto-switching feature saves manpower. Hence no need to operate manually.
Tumblr media
Controller with installation charges:- Rs. 4999/-
And also various price available. So, do you want to know more?
Know More
You can order this pump controller click this link below
Order Now
We are the leading ‘automatic water level controller’ manufacturer, distributor & whole seller. We’ve helped thousands of customers from businesses to business as well as business to retail. We’re proud to have built a strong relationship for great prices, great selection, and great quality products. Automatic water level controller buying expertise allows even
the smallest company or individual to enjoy the competitive pricing. We ‘automatic water level controller’ have gained
success in the market by Manufacturing & Whole selling like Water Level Controller, Motor Starter, Water Level Indicator, Digital Time Switch, etc. Our offered products are manufactured in compliance with the pre-defined industry
norms and tested to ensure their flawlessness. We guarantee what we sell. We only sell high-quality and reliable products and are committed to exceeding all industry standards.
0 notes
pumpcontroller · 3 years
Text
5 Benefits of Using an Automatic Water Level Controller System
Water scarcity is occupying most of the countries in the world. However, it is important to note that the shortage is not due to lack of water, but to the unnecessary wastage of water due to overflow in overhead tanks in most homes. This problem can be solved with the help of automatic water level controllers. Automatic water level regulators work with the fact that water is a good conductor of electricity, so can be used to open or close a circuit in the water tank. Whenever the water level goes up or down, different circuits of the controller send different signals.
According to our requirements, these signals can be used to turn the pump motor on or off. Automatic water level controllers have proven to be a boon for those who believe in the latest technology and use water in an economical way. Here is a list of several useful benefits to installing an automatic water level controller for your tanks.
ORDER NOW- +91-6291909839
Tumblr media
Benefits of Installing an Automatic Water Level Pump Controller System for Your Tank!
Installing Automatic water level pump controller not only save water, it's lots of benefits for you. Here are some of them.
1. Automate It:
As the name suggests, automatic water level controllers can function during a completely autonomous manner. They eliminate the frustrations related to manual monitoring of the tanks, by using an automatic timer switch. there's no got to keep a check and await the municipal water system , because the pump are going to be switched on/off on its own. thanks to the water level controllers’ automatic operations, the water levels are maintained at the acceptable level in the least times.
2. Power Saver:
The high rise buildings have increased in number to support modernisation and therefore the ever-growing population. But with this increase, there's also a burden on resources like power and energy. Water level controllers are ideal at saving power. In normal circumstances regulating water levels can consume electricity and waste the water. But with automatic controllers, electricity usage is controlled, and fewer water is required to manage supply.
3. Saves Money:
Since water wastage is low and you're ready to save on electricity also , the water level controllers help economize and do your bit for the environment also . They accurately help regulate what proportion energy is employed to guard against any unnecessary water or electricity usage. This results in substantial savings in monetary form over the course of your time .
4. Water Maximisation:
Water pumps are generally used more during daytimes. Water level controllers help maximise water usage during midday and reduce water usage in the dark in an automatic manner. This helps to take care of an optimum level of water and supply you with the utmost use of water at the acceptable times.
5. Water Conservation:
One of the foremost important benefits of automatic water level controllers is keeping water wastage cornered . Water are often conserved better as we are aware of water levels within the tank. we will relax and stay stress-free that no water will get wasted because the pump are going to be transitioned automatically once the tank gets filled.
Water level controllers accompany a compact design and are extremely user friendly. they assist to regulate the optimum water level easily and alerts you within the event of the water level becoming too high or too low. The walls and roofs are shielded from seepage as there's no overflow of water from tanks. they are available with a lifetime of 15 years and are extremely long-lasting.
ORDER NOW- +91-6291909839
0 notes
pumpcontroller · 3 years
Text
Best automatic pump controller in kolkata
Automatic water pump controller controls the water pump, and turns it on / off   with respect to the level of water to the tank. Automatic water pump controller with Indicator for pump on / off  reservoir empty / overhead tank full. Pump automatically turn on before overhead water tank empty and turn off once overhead tank full of water.  As well as continuously monitoring reservoir tank also, if water level goes down then motor will automatically turn off. Save electricity, Save water, Save man-power.
For More information click the link below
https://www.automaticwaterpumpcontroller.com/
Tumblr media
1 note · View note