muppetmoth

[muppetmoth]

these pics are from after i already did this a couple times so yours is gonna look a bit different. Ok so first undo these^^^^ four screws. take out the little half circle with teeth. it holds in a lot of the fur thats attached to an elastic band. theoretically you could use it to hold it back inplace after putting it back together but ive never actually gotten it to go in with the fur. you dont need to undo this one:

i recommend keeping it inplace tbh. then youre gonna get to the six clips. theyre extremely hard to get out. i ended up cutting all of them along the bottom. it sucks. ive seen people say you can push them out with a screwdriver but i never got that to work. hopefully you can do it better. this is my first custom. ive also heard people say you can cut a thread or two and then theyre easier to get out but i didnt want to cut any threads so i cut the clips instead.

then pull the fur up as high as itll go and undo all six housing screws. the top two are really far up almost ontop of their head. then undo the two clips on the side:

then you can just lift the back housing cover completely off. this next picture already has one ear removed. ignore that sorry. unscrew the two screws with washers on the pink plastic. these are holding the ears inplace.

using a flathead screwdriver you should be able to leverage out one side of the ear posts. after that you can just pull them out fairly easily. do this on both sides.

^^^then you should be able to flip the front housing cover up just enough to push out the clips holding the front fur on. then remove the front housing and faceplate. this picture already has the faceplate removed. its held in by three screws. i took it off to paint it.then you want to unplug the ears from their little square connector dudes and remove them from the fur. try not to pull too hard on the wires. theres a small hole they go through the fur thats lined with plastic. its kinda tricky but doable. dont be afraid of this part just be careful of the wires.

if you want to paint the eyes youre gonna have to scrape or sand off the current design and the white parts. its too slick to paint directly. it helps to prop them up with something while painting because theyre on a spring for when they open/close. i used the cover for my scrapey tool. dont forget to sand the lids if you want to paint them too! i forgot and my paint was kinda thick and now they dont always close all the way. most of all be careful not to get any of the dust in the internals.

this is the fun part now you can paint whatever you like!! clear spray paint makes a good sealant ive found.

the rest of this post is gonna be things to be mindful of when putting them back together that i wish i had thought of before i learned it the hard way. if you have to really force anything its probably not right. this long part in the back is gonna get in the way!! took me forever to figure it out. lay it flat in your hand as you put the housing on and make sure it lines up right.

before trying to get the back housing back on make sure the silver top button is lined up correctly! it should fit in the two groves on the very top of their head. when screwing the housing toegther BE CAREFUL OF THE EAR WIRES. BE CAREFUL OF THE EAR WIRES!! i caught mine and accidentily shredded most of them the first time i put them back togeher and ended up having to resolder a bunch of it together and it was doable but a pain so just be careful when you put the holes into their notches that theres no wires in the way. the wires are right next to the pegs/holes that get screwed together. the four wires in the back are for the ears:

i think everything else has already been documented better than i could do. i also carved a bit off of the ear poles to help but i did too much on one end and now that side doesnt move so thats probably not the best idea! i also highly recommend reading furbinthewoods' post on doing this i wish i had been able to find it when i was doing mine. ive reblogged it and put it under the "furby teardown" tag.

heres Feral my first custom ever and first furby since the 90s (I Love Them):

have fun and dont be afraid to fail!!

[muppetmoth]

hello furblr long time no see

murby

is pleased to make your accquaintance

murberry murphy the murby (or just murby for short) has six legs and smells of strawberries. he is based off a moth and the strawberry cow. i designed him back in summer! perhaps my most ambitious oddbody to date.

[muppetmoth]

the furby chart

[muppetmoth]

the furby chart

[muppetmoth]

Clown Cousins!

Chubby Bunny and Poppy Pom Pom spending some time together before Poppy gets adopted!

[muppetmoth]

all I can say abt the new furby for now

[muppetmoth]

new furby came out recently and they do not close their mouth

[muppetmoth]

Today I made my own custom mothman furby!!!

I just can’t decide if he should be called Mothman, Mothby or Mordecai…

His wings and antenna were made with felt, pipe cleaners and a marabou boa ٩(ˊᗜˋ*)ﾉ

[muppetmoth]

Chubby Bunny the Clown Furby 🤡

Meet my newest custom, Chubs!

I am very happy with this custom. It took me awhile because it was a lot of sewing. And the furby came to me with paint on his beak and not working properly.

So I am happy with how they move and talk.

They love light and laughing 💘

[muppetmoth]

1998?!?!!? 2005?!??! Only hasbro (and me) knows it’s kinda like that movie with Jeff and the fly or whatever.

[muppetmoth]

MAKING A LONG FURBY CARRIER BACKPACK

The most universal problem we all share is the utter length of our furbies. Tho beautiful, gracious and completely other worldly, it is not very portable.

Furbies are meant to explore the world and cause chaos among simple mortals. Now we can help them with also having both hands free!

Perfect for festival season or simple everyday activities like going to court, your beloved friend can accompany you everywhere!

I started with creating pattern that uses my boy’s anatomy to its advantage. Arm holes hold onto him and it will fasten with two buckles.

The mock-up fits him perfectly!

Those are materials I used:

beautiful purple cotton fabric that complements Topson’s fur

thick polyester for lining

white felt for the layer in between

black strap + plastic thingy that I don’t know the name of to make adjustable backpack straps

buckles

Firstly I sewn cotton fabric with inner lining fabric and turned it right side out.

Felt goes inside and the thing is closed with stitch all around.

Then I drew the arm holes and sewn around them similar to how you make button holes.

Next goes the buckles.

Topson tried it on and it fits perfectly!

It’s time for backpack straps. I sewn two layers together, flipped it and stuffed it with poly stuffing.

Then I added the adjustable mechanism.

The straps go on the harness and it is done!

I’m so excited to share it with you all! This project was on my mind for so long and I finally managed to finish it. Stay tuned for second part where I will be decorating the carrier and of course for some new content with Topson terrorizing the civilians and attempting malicious acts.

Peace, stay long 💚

[muppetmoth]

☀️🧡 Meet Apricot 🧡☀️

She's my first custom furby baby and I couldn't be happier with how she turned out!

[muppetmoth]

🍭Crash the Sugar Crash Furby🍭

My most recent custom I've done. I was gifted a confetti baby furby that needed some work done on it so here we are! I had a lot of fun with adding the white in the hair with a yarn process.

The furby came with a heat damaged eye which took forever to reverse and bring back to the white color

[muppetmoth]

Appreciation post for the weird beta furbies on the original packaging

[muppetmoth]

Kuromi

This is my first Furby Connect custom! It was a learning curve compared to what I've worked with in the past, but in the end I'm very pleased with the result! She's giving off scene queen vibes and I'm here for it.

[muppetmoth]

[muppetmoth]

Mothman’s furby girlfriend