#hex shank

[an-au-blog]

"There's an ugly witch in the woods" the kids would sing. "In raggy hoods,/Any job will do,/For gold coins two!/A hex or a curse,/For a coin-full purse."

And so, Shanks ventured out into the woods, based on a children's nursery rhyme, hoping and praying that the witch could help. He's searched high and low to find the love of his life, who left him heartbroken and rejected.

He finally found the so-called witch, but they refused to talk to him. They shut the door in his face, refusing to talk to him, blocking the door and waiting for him to leave. But Shanks never did. Instead, when he saw that the witch was blocking the door with their body, he started talking, trying to convince them that he needed their help. He told them about the love of his life, who he had been seeking out ever since he got old enough to, how much he loves the other and he offered money, lots of money. Finally, the witch, covered in cloaks from head to toe, let him in. They didn't talk to him directly, using a familiar or writing.

They did a fast seance, telling him it was a lost cause. But when Shanks insisted on finding them, he was like a dog biting on a bone, no budging until he got what he wanted. The witch relented and gave him, what they thought were three vague and unfindable things. An article of fond memories, the laughter of the past and the most precious stone unbeknownst to man.

But then Shanks came back with a locket of hair that Buggy had given him when their foolish childhood dreams were to get married. He also carried a mirror that replicated the memories of his love in his happiest days, even though in most he was laughing at Shanks, it was his favorite sound. And the last, he brought the promise stone Buggy had given him - a pebble that looked blue under moonlight, as a keepsake until they could properly get married.

The witch looked unhappy with the items but did their chant and ritual. In the end, they told him the same as last time - his love didn't love him back and didn't want to be found, so he should stop searching.

And that would have been it if Shanks wasn't so stubborn and hadn't kept on giving the witch money to help him. The witch kept on bamboozling him, until, finally, the witch had enough.

"Will you stop it, you foolish man! How do I have to tell you to get lost, so you finally listen!" The witch screamed at him, tears threatening to fall.

Shanks only smiled at him. "Am I so horrible for wanting to hear your voice, my love." He kneeled down and took his hand. "No force can keep me away from you, Buggy."

The witch, Buggy, rubbed his eyes, "You idiot..."

"Will you accept this idiot as your own?" Shanks, placed Buggy's hand on his face, nuzzling in the touch, craving what he had been able to barely see, but never touch or hear. A man deprived of sight and sound, finally relishing in the beauty of the music of his lover's voice, the soft caresses, like seeing color for the first time in his life.

"How did you know..."

"I'd recognize you if I were a blind man and you a mute. By the essence of your being."

#or smth like that idk #kudos to those of you who got the “Song Of Achilles” ref in the last bit #shuggy #shanks x buggy #buggy x shanks #op

[moonlightspencie]

First ever request on Tumblr but Can you do one where like the reader is a hunter as well but she doesn’t make that obvious so when Dean keeps asking her questions she threatens to stab him and he says “ You’re not really gonna shank me, are you ?”

oooh a first request?!? so freaking exciting. hopefully this lives up to expectations in any way :)

Pairing: Dean Winchester x Reader (kinda hehe)

Warnings: talks of death (aligning with usual supernatural stuff), this is a comedy to be honest, [“what do you have?” “a knife!!!” “no!!!!”]

send requests here!

—————

Dean walked into the near-empty bar, ducking under the tape at the door. He looked around to see one woman standing near the body, and her full attention now seemed to be on him. She looked official.

“Hey,” Dean started. “I’m, uh, Agent Plant. You are?”

“Agent Jones,” she stated curtly.

“I thought this was a closed scene? Cops outside put up a fight when I tried getting in.”

“Special privilege.”

“Anything new?” he asked, walking closer to her.

“Not so far.”

“You mind if I check around the space? See if any, uh…”

“Go for it.”

He nodded, looking at the bar first. It seemed like it was going to be a witch situation, so he started looking for hex bags. He was near the end when he turned back to her as she examined the body.

“Has anything strange been found? Any weird coins or…?” he trailed, watching her face.

She narrowed her eyes. “No.”

“No small bags or anything hidden around the room?”

She stared at him for a moment from where she was crouched.

“What would be in these bags if they were found?”

“Uh, you know… There’s been some scenes that could be connected. They had small animal bones, some other weird—”

“Alright,” she mumbled, standing abruptly. She pushed him into the wall, a hand on the handle of her knife, “How the hell do you know any of this?”

“I- I don’t…” he started with wide eyes.

She pulled the blade. “You a witch?”

“No! No, I’m not a—” he stumbled over words as his eyes widened further upon seeing the knife. “Uh, you’re not really gonna shank me, are you?”

“How do you know so much about what’s happening here?”

“I’m trying to help,” he said, raising his hands in surrender.

“Help how?”

“I’m a hunter!”

She paused. “What’s your name?”

“Winchester. Dean Winchester.”

Realization dawned on her face as she withdrew her knife. She watched him closely, not moving. As she opened her mouth to speak, an even taller man walked into the room.

“Is everything good here?” he asked, looking between the other two.

“I assume you’re Sam,” she said quietly.

“Yeah.”

She nodded. “Well, damn.”

Dean smirked as she lowered her arm from where it rested against his throat.

“If you wanted me against the wall, you really could’ve just asked, sweetheart.”

She narrowed her eyes. “I won’t hesitate to stab you next time you say something like that.”

She looked between them, annoyance still thrumming in her veins. She huffed a sigh as she sheathed her blade again.

“It is a witch. I just don’t know how they killed this particular person,” she said. “You’re welcome to help me, but keep in mind this was my case first. I’ll be outside.”

They watched as she left, mumbling under her breath about the “freaking Winchesters” showing up to her case. The boys looked at each other as she walked out the door.

“That was kinda hot,” Dean said finally, letting out half a laugh.

First Sam laughed. Then, upon realizing they were on a literal witch-hunt, he serioused.

—————

dean winchester taglist:

@deanwithscissors @hyunjaebaby @simp4olderm3n

#dean winchester drabble #dean winchester request #dean winchester x reader #dean winchester fanfiction #dean winchester

[hyperfreaksating]

May I ask what are you headcanons about Buggy's childhood ? Like how Roger found him ? Was he a baby like Shanks or older ? If he had parents at one point but lost them or was he orphan since birth ?

I need to know 😭

Oh I can but y'know y'know that's not something I think about a lot... /s

ARHEM. SO. Here is how I see things :

We know from stampede that Buggy has some memories from his mother (even if it's probably stated as a joke, I keep that in mind)

So I headcanon that he was a bit older than Shanks when he was adopted by Roger pirates - maybe 2 or 3 years old

However, he was put in an orphanage real young - I personally like to HC that he was the son of a sexworker (obviously nothing bad in it, in this house we respect sexworkers, hex swerfs)

Roger pirates had to anchor on his island for groceries things, and spotted the little clown toddler playing alone in front of the orphanage

Rayleigh immediately wanted to adopt him so Shanks would not be the only toddler on board, Roger immediately wanted to adopt him because "ARHARHARH HEY RAY' LOOK AT THIS CLOWN BABY LET'S TAKE HIM ON THE BOAT"

So yes basically Roger pirates were the only he ever had (until the one I made him have and - NO I WON'T STOP TALKING ABOUT MY OC OK)

which made Shanks lefting even more devastating because in one day he basically saw his father dying in front of him and was abandonned by his brother so like he lose all the only family he had in ONE DAY at 15 - this clown natural state is sad and pathetic, poor little angry man. I wanna hug him. AND I HATE SHANKS HOLLY SH- *take a deep breath*

May I had that I HC him as being both adorable and unsufferable when he was a kid ? Big angry crybaby. Didn't mature a lot on this point.

thank you for the ask now I feel the urge to cuddle the clown

#buggy the clown #captain buggy #buggy one piece #op buggy #one piece headcanons

[movedraptor5913]

To throw my hat in the ring for anyone who wants tips on Mirror Dungeon 2 Hard Mode, this is what I've got. It's mostly anecdotal, so take it as you will:

Starter Buffs

Technically unnecessary, but in the way that airbags are "technically unnecessary" for a car to run. It'll go fine for a while, but you won't like it when something hits you.

Your mileage may vary on what to pick up in terms of buffs, but you will want buffs. My first two runs in Hard Mode were with +3 offense and +2 defense, since I wanted to maximize my clash power. Second run also had +1 max speed, which was nice to have, but it wasn't game changing from what I've noticed.

Starters

In both runs I've done so far, I used Rabbit Heathcliff, Tingtang Gang Leader Hong Lu, LCCB Ishmael, L Corp Faust and Rosespanner Meursault.

Rabbit Heath is just good, period. Tingtang HL is good at mopping up low health enemies and can clash with Shank (or Mutilate, in a pinch). L Corp Faust is a glass cannon that can clash well enough with Deep Cuts and Opportunistic Slash, though not as well as the other Sinners. LCCB Ish and Rose Salt can both clash well. Ish can inflict a few different useful debuffs, although you might need EGO gifts to get better mileage out of them. The weakest link of this bunch is definitely Meursault, but both he and Ish share the job of "getting punched in the gut and not folding in half".

You're gonna want to bring a unit or two that can tank, which most versions of Meursault can do well enough. You *will not* be able to win every clash, so you might as well have someone who can brace for the hit with Guard or Protection. Dodge still does well, but some enemies later on can attack higher than your dodge can cover. Best you can hope for is dodging most of a multi-coin attack in these cases.

Try to make sure your units are at least lvl 30 T3 before taking them in. Offense/Defense Level affects clash power, remember.

(Partly because I don't have the starting Cost boost and partly due to personal preference, I don't like running N Sinclair in the Mirror Dungeon. N Sinclair doesn't feel suited for the environment's sanity retention mechanic. That being said, a lot of people use him here anyway because he hits like a train.)

EGO

Having a wider variety of options for big hits will serve you well in not stressing over which big hit to use resources for. You'll also want to use them with discretion during standard fights, so you don't have to worry about having resources in fights you need them for.

Bodysack and Land of Illusion serve their usual roles as cheap big hit and good AoE respectively. Snagharpoon was useful for its different targeting priority in normal fights, which let me take some pressure off of units that would've been hit unopposed otherwise. Chains of Others and Representation Emitter were my panic buttons. If something was hitting too hard, I'd use Chains. If I lacked SP for clashing, I used Emitter.

The EGOs I've ended up using the most besides base ones were Roseate Desire (Hong Lu T2), Legerdemain (Gregor T3), Screwloose Wallop (Meursault T2), and Hex Nail (Faust T3). Ardor Blossom Star, Fluid Sac and Pursuance were also equipped, but they didn't see use in any meaningful capacity. Run one did also feature a fair bit of Sunshower (Outis T3) after she joined as my seventh member.

Pickup Characters

0 and 00 characters are free, so you're gonna learn to use them. Even if you don't care about anyone besides your core team, pick up some freebies for support passives.

Run one had a good start in terms of Cost, so I was able to pick up G Corp Gregor and Seven Outis early on. I didn't think to pick up any other characters until Floor 5, where I picked up base Rodion, Mariachi Sinclair and Seven Yi Sang.

Run two started with Faust and Meursault almost biting it at the end of the Floor 1 boss fight, so I picked up Mariachi Sinclair, Seven Yi Sang and Rosespanner Gregor for the team. Support from the other Sinners came later on, but Yi Sang and Meursault traded places on the team depending on the need until Meursault got healed. (In retrospect, why did I put El Jefe on my team? I didn't even remember he had Sinking at the time)

EGO Gifts

Your run's success wont hinge on getting the best EGO gifts but making the best of the options you're presented with.

You'll want to cover three bases: healing, EGO generation and damage. The specifics don't matter quite as much but try to shore up where your team feels like it's lacking, if possible. Just be smart about how you spend your Cost. A rest and a gift can be equally important.

That being said, Nebulizer has been shockingly useful for me. 4 turns/uses of crit chance on units that hit like trucks but otherwise have no crits can be quite nice if it activates. Phlebotomy Pack and Homeward have also been nice pickups when they appeared.

Some Strats I Have

Play smarter than Win Rate. It's utterly useless in focus fights and only helpful as a guide in harder normal fights. If you've played for a while, this isn't a new idea.

2. A lot of your clashes will be Neutral or worse. There are two things I look for in these: "Is my best roll worse than their best roll?" and "Is their worst roll worse than my one coin?"

If your best attack roll is worse than their best attack roll, it might be worth it to use a defense skill instead. This is especially so in human fights, as losing the clash will give the enemy higher SP, which makes further clashes riskier. Alternatively, use an EGO, if you feel it's necessary to.

Related to the above, EGOs can still lose clashes and there's not much that can be done about your odds in these situations, so keep your sanity high (or low, if you like to live dangerously) and hope for the best.

If your one coin on a multi-coin skill is better than their worst roll, it might be worthwhile to go through with the clash. This is especially true in Abnormality fights, where it's a flat 50/50 for each coin they have. (If your skill only has one coin to begin with, see the first bullet point.)

3. You can use unit speed to delay clashed attacks in focused battles. If you have multiple units that can redirect an attack and the slower unit doesn't have worse success chance, you can use the slower unit to clash to get free damage in early and potentially stagger the enemy before the clash happens.

4. If you don't like how a fight is turning out, you can withdraw from the fight before the result shows up to act like that fight didn't happen.

How my runs went

Run one had two speed bumps: Fairy Gentleman and Kromer. Fairy Gentleman took a while to fight because I didn't know the fight's mechanics. The two previous times I've fought him in normal conditions, I steamrolled him before any effects could really build up. I still don't know how he works besides "don't get everyone boosted" because he gets a clash buff against units who have morale boost.

The final fight with Kromer on the other hand, was resolved by dumping EGO into every clash I wasn't confident in. I had picked up Rusty Coin earlier on Floor 5, so while both fights took 7 turns, Kromer's took far less brainpower.

Run two was a bit more scuffed with some unlucky RNG early on that I decided to just work through instead of trying to min-max. Besides my questionable decision to bring El Jefe as my 6, the run wasn't very eventful. Floor 4 was So That No One Will Cry and Floor 5 was Shock Centipede. The talisman doll wasn't an issue because I didn't run enough debuffs I cared about for the debuff sharing to be an issue. The centipede was just calculated risk with clashes while keeping sanity up. As long as you have good sanity, you're more likely to succeed on EGO clashes. Pair this with the clash delay tactic and life gets easier.

Anyway, thanks for reading if you made it this far. I've had a good time with MD2 Hard Mode so far. I keep hearing how bad the fish and the statue are to fight, so I'm hoping I can encounter them on my next run to see how well my team holds up.

#limbus company #mirror dungeon

[astarab1aze]

Common Munchies

The supernatural world exists in conjunction with and often mirrors the human. To this end, supernaturals have corporations, responses to competing products, inventions, etc etc - which means they have hella snacks, too. This list is nonexhaustive.

Snallygobsters, which are gobstopper-like hard candies that can temporarily give you Snallygaster traits, like a beak or wings. It only lasts for a moment though, just enough to be fun. They are a collaboration between the supernatural Gretel's and mundane Wonka that's been going since the early 1980's.

Cookies & Screams, which are chocolate sandwich cookies with enchanted catagoras cream that screams between the cookies. They're just the supernatural world's corporate response to Oreos, really. Mystery packs always contain one randomly hexed cookie that invariably ends up making one's mouth taste like pickled wyrm liver.

Boo Berries, an affectionate name for a berry tart made throughout the autumn months. It's also made with enchanted catagoras cream, as well as honey, custard, and chocolate depending on the individual making it. The catagoras cream makes them moan like a ghost or scream like a banshee once cut into. Typically enjoyed with friends or family, or otherwise large groups.

Witch Fingers, which are twitching, flicking, pointy treats not unlike a green desert pastry with red cream and jam in the middle. Much simpler than the above, but good fun for young children. Originated as a response to the goofy stereotypes ascribed to witches.

Ecto-Slime, which is just a moving slime candy themed around the G.hostbusters franchise, moving and wriggling the second the tube opens. Many sorcerers are enormous fans.

Cottonmouth Cakes, an insufferably dry tea cake. A delicacy often (not) enjoyed with tea. They're made with vanilla, lemon, blood orange, chocolate, lavender, and Morphagora Eyes typically, though there are variants. The eyes move and occasionally blink, but they are safe to eat, offering a burst of concentrated flavor that does nothing to ease your dry mouth. Typically served as an insult or an offering of friendship in formal settings. Older generations have a taste for them, but there are some youngins who enjoy them too.

FrankenLeeches, a chocolate candy modeled from the animal, but instead of blood and other gross things, they are stuffed with a marshmallow cream. They come in multiple types of chocolate and ooze with flavored filling; Dark chocolate is paired with orange cream or Cookies & Screams filling, white chocolate is paired with strawberry cream or key lime, milk chocolate with caramel cream or almonds, and more. There's also a gummy version filled with sour Ecto-Slime and comes in various flavors. Sold standard in assorted packs of 3-5in long Leeches, 3 of the chocolate variety or 3 of the gummy variety. They're often used as a gag on 1st year students, not because they're disgusting (on the contrary, they're quite tasty), but because the idea of biting into a writhing Frankenleech is simply foul on its face - and they do, in fact, wriggle and writhe like living leeches.

Ramona Shank's Rum-Runner Candies, enchanted novelty caramels that, when ingested, temporarily give you a " pirate accent " and a sudden craving for rum. Created by Ramona Shank, the great Pirate Witch, during the Golden Age of Piracy. Ramona's reputation was more or less just a marketing scheme that still works to this day.

Bloody Delights, a play on Turkish delights. They are made with a variety of donated / byproduct blood types, rose water, gelatin, raspberry juice, and finely powdered sugar, and are designed specifically for vampires. Their flavor is a bit...metallic, muddy, and weird to non-vampires, but taste sweet, pillowy, gummy, and homely to most vampires.

#☿ || Headcanons. #/ a lot of my lore posts are ancient reposts i will not be editing #/ mundanes = humans #/ supernaturals = nightfolk

[ask-overclocked-sinners]

wait, all of you? which ego are you all overclocked as?

“I can answer this question. Faust can confirm that all of us have Overclocked, and has made a list of which sinners are in which EGOs, as well as for the sinners not present yet. They will be marked with italics.”

Yi Sang - Wishing Cairn

Faust - Hex Nail

Don Quixote - Fluid Sac

Ryoshu - 4th Match Flame

Meursault - Pursuance

Hong Lu - Roseate Desire

Heathcliff - Telepole

Ishmael - Ardor Blossom Star

Rodion - Rime Shank

Sinclair - Impending Day

Outis - Ebony Stem

Gregor - Lantern

#limbus company #Hex Nail: Faust #Oops! All EGOS! #Everyone is mentioned

[pmryuu]

Friend ID: Q459903012 Both Faust with Fluid Sac lv 3, Hex Nail lv1 EGO

Don with Fluid Sac lv 2 EGO

Ryoshu with 4th Match Flame lv 3 EGO

Rodya with 4th Match Flame, Rime Shank EGO

Heathcliff with Telepole EGO (sr no bunny)

Ishmael with Roseate Desire, Ardor Blossom Star EGO

Outis with Ebony Stem, Ya Śūnyatā Tad Rūpam EGO

Sinclair with Impending Day EGO

Liu Gregor with base and Lantern EGO

G Corp Gregor with Legerdemain and Lantern EGO

#limbus company

[tactfulsaboteur]

hey does anyone have like a ⅛" hex shank drill bit i can borrow that's at least 2" long or so

#the set i've got are short lol

[movingtothefarm]

Decoding Screw Labels

example:  12-24 X 7/8 Hex Washer Head Self Drilling #3 Drill Bit

12 – Represents the thickness of the shank. Think dress size. The bigger the number, the thicker the shank.

24 – Represents the number TPI, or the number of threads per inch. The higher the number, the finer the threads, which are best used in metal applications. The fewer the threads per inch, the coarser the threads, the faster the screw will drive and are the preferred threading for wood applications or wood studs.

7/8 – measurement from underneath the head to the tip of the screw. In the case of flat headed screws, the length is measured from the top of the screw to the point.

#3 Drill Bit – Drill bit tips range from #2 to #5. They do not represent the size of the hole that they will drill but do represent the thickness of metal they will drive through. Source: All Points Fasteners by MaryLouise Eckman, Head Screw Lady Since 1986  

Self-Drilling Versus Self-Tapping

#diy #buying screws #how to #self drilling screws #self tapping screws #woodworking #metalworking #it's all in the details

[anandsteelsblogs]

What are the differences between a bolt and a screw?

In the world of fasteners, bolts and screws stand as stalwarts, fundamental elements within the creation and assembly of countless structures and products. While they will appear interchangeable at the beginning glance, a better exam well-knownshows wonderful variations in their layout, characteristic, and programs. Let's delve into the nuances of bolts and screws, exploring their characteristics, makes use of, and the situations wherein each excels.

Bolts: The Backbone of Structural Integrity

A bolt, regularly identified by using its external male threading, is a cylindrical fastener designed to be inserted thru pre-drilled holes in two or greater gadgets, and secured with a nut and washing machine. The threading on bolts is commonly incomplete, extending only in part alongside the shank. This function enables a stable grip whilst tightened with a nut, ensuring balance and structural integrity.

Nuts play a pivotal function inside the capability of bolts, imparting the essential counterforce to stable the linked components. This symbiotic relationship between bolts, nuts, and washers guarantees robust connections proof against loosening and vibration. In packages requiring improved energy and cargo-bearing capability, including production and heavy machinery, bolts are integral.

Exploring Variants: Socket Screws and Threaded Rods

Within the world of bolts, variants consisting of socket screws and threaded rods provide specialised answers for particular necessities. Socket screws, additionally known as Allen screws or hex socket bolts, function an inner hexagonal socket on the pinnacle, permitting tightening with an Allen wrench or hex key. This layout guarantees a flush end and minimizes protrusions, making socket screws perfect for applications wherein aesthetics and area constraints are paramount.

Threaded rods, then again, diverge from conventional bolts of their elongated form with out heads. These rods characteristic continuous threading alongside their entire duration, making an allowance for flexible use in applications requiring custom lengths or as structural supports in creation and manufacturing.

Screws: Precision in Self-Tapping Ingenuity

In comparison to bolts, screws own self-contained threading alongside their entire length, getting rid of the need for accompanying nuts and washers. This inherent threading enables screws to create their own inner threads upon insertion into a pre-drilled or self-tapping hollow, anchoring themselves securely in the material.

The self-tapping screw, a wonder of engineering, capabilities a pointed tip and competitive threading, allowing it to cut via various materials, such as metallic, timber, and plastic, readily. This functionality makes self-tapping screws indispensable in industries starting from automobile and aerospace to DIY domestic tasks, in which performance and precision are paramount.

Distinguishing Characteristics: Bolts vs. Screws

While bolts and screws percentage the not unusual reason of fastening gadgets collectively, several key differences set them aside:

Thread Type: Bolts commonly feature partial outside threading, whereas screws boast continuous threading along their complete period.

Fastening Mechanism: Bolts rely on accompanying nuts and washers for secure fastening, while screws create their own internal threads, negating the need for extra additives.

Applications: Bolts excel in applications requiring high strength and load-bearing capability, inclusive of construction and heavy equipment, whereas screws are favored for their self-tapping abilities in industries spanning automotive, electronics, and woodworking.

Choosing the Right Fastener for the Job

Selecting the suitable fastener hinges on different factors, inclusive of the substances being joined, the load-bearing requirements, and environmental conditions. Bolts shine in situations demanding sturdy connections and structural balance, whilst screws provide extraordinary efficiency and precision in self-tapping packages.

In conclusion, expertise the nuances between bolts and screws is crucial for accomplishing premiere consequences in construction, manufacturing, and numerous industries. Whether it is the reliable grip of a bolt-nut-washer trio or the precision of a self-tapping screw, each fastener performs a important role in bringing systems and products to fruition.

For all your stainless-steel and fastening needs, Anand Steel stands as a beacon of reliability and expertise. As a main importer and exporter of stainless-steel shims, strips, coils, foils, and round bars, Anand Steel makes a speciality of nickel alloys, catering to diverse enterprise requirements with unwavering commitment to high-quality and patron pleasure. Contact Anand Steel these days for comprehensive answers tailor-made on your unique needs.

#nuts #washer #socket screw #self-tapping screw #threaded rod

[sachiyasteel]

Stainless Steel Bolt in India - Sachiya Steel International

Stainless Steel Bolt in India, leading suppliers dealers in Mumbai Chennai Bangalore Ludhiana Delhi Coimbatore Pune Rajkot Ahmedabad Kolkata Hyderabad Gujarat and many more places. Sachiya Steel International manufacturing and exporting high quality Stainless Steel Bolt Fasteners worldwide. We are India's largest Stainless Steel Bolts Exporter, exporting to more than 85 countries. We are known as Stainless Steel Bolt and Exporters due to exporting and manufacturing on a large scale.

Types of Bolts -

Sachiya Steel International manufacture a wide variety of Stainless Steel bolts. There is a different types of bolt used for different needs. Bolts are used with Nuts. Our Stainless Steel Bolts are available in different sizes, grades and shapes. Sachiya Steel International manufactures and exports high-quality industrial bolts. We are Exporters of the following Bolts -Hex Bolts, Carriage Bolts, Square Bolts, T Bolts, L Bolts, U Bolts, Allen Cap Bolts and more.

About Stainless Steel Bolt Fasteners -

A bolt is a form of threaded fastener with an external male thread. Bolts are closely related to screws. People misunderstand the difference between bolts and screws. Bolts are often used to make a bolted joint. This is a combination of the nut applying an axial clamping force and also the shank of the bolt acting as a dowel, pinning the joint against sideways shear forces. For this reason, many bolts have a plain unthreaded shank (called the grip length) as this makes for a better, stronger dowel. The presence of the unthreaded shank has often been given as characteristic of bolts vs. screws, but this is incidental to its use, rather than defining.

For More Info Visit our Website: https://sachiyasteel.com/stainless-steel-bolts-manufacturers-in-india.php

Email Us: [email protected]

Contact Us: 097690 56007

#engineering

[packingbeltbnm]

Hex slotted nuts can perform numerous advantages

Slotted Nuts

Slotted Nuts (commonly categorised as Hex Slots, Hex Slotted Crazy or Castellated Nuts) are a kind of nut designed with holes through every single center flat upon its hexagon surface to facilitate having cotter pins or safety wire for you to secure it any time attached with fasteners using drilled shanks.

Hex slotted nuts could be utilized in a lot of applications and combined with lock nuts for added security and avoiding loosening over occasion. They come in mixture sizes, materials and is done that make them worthy of use across a multitude of environments.

Hex slotted nuts can perform numerous advantages, such as decreased vibration-related loosening, easier assembly and removing procedures, and any smaller nut package size. Custom Fully Transparent Stretch Wrap Film Suppliers They're especially useful in environments by using high friction exactly where loosening could occur as a result of friction between threaded fastener post.

Hex slotted crazy are easier for you to tighten than their standard counterparts on account of having the exact same outer diameter seeing that their bolt associated with attachment - not any additional effort is important in getting issues going!

To utilize a hex slotted enthusiast, simply place it covering the head of your bolt and twist until the specified torque has happen to be reached. Next, stick in a cotter pin or split pin through its slots into any predrilled divots on bolts, screws, studs etc along with deform it so that it cannot easily often be removed - locking the hex nut firmly and preventing loosening as time passes.

Slotted hex nuts in many cases are combined with lock nuts to create an assembly that's easier to setup and prevents loosening eventually. Lock nuts appear like regular hex slots as they feature smooth ends rather then raised ones; once tightened which has a wrench, these smooth-end lock nuts can be placed over the particular tightened hex crazy before being tightened having another wrench; after tightened further even now, cotter pins are then inserted by them and towards holes on bolts or screws by using predrilled holes for more locking against vibration or perhaps loosening.

Empire Bolt & Screw has the solution for your standard or castellated (castle hex nut) hex enthusiast needs - whether that means standard slotted nuts or castellated citadel hex nuts in various sizes, threads and materials. We provide whole selections of slotted and castellated nuts inside various sizes posts and materials so call us today today - i am always glad that can help! For more information or requesting selections or CADs -- give us any call and we will get shopping!

#Wholesale Fully Transparent Stretch Wrap Film

[jenningsalbrechtsen99]

Sorts And Makes Use Of Of Sheet Meta Screws

Meet Bhavesh, a seasoned blogger with a wealth of data and expertise. From metal products manufacturing to retail, Bhavesh has a various background in various industries and is devoted to sharing his insights and experience with readers. We assure that our screw piles are free of manufacturing or materials defects. Higher drive torque may be applied to hex heads as a outcome of they're externally wrenched, which also signifies that cam out does not apply. Sheet metal screws are commonly made from steel and stainless steel but are also available in a variety of other metals like brass and bronze, depending on the precise application. Using zinc-plated sheet metal screws helps resist corrosion and enhance the longevity of the fastener. At Fastener SuperStore, Inc., we supply solely the very best high quality stainless steel screws and other fasteners — from nuts and bolts to spacers and standoffs. We make it our enterprise to supply you with sturdy hardware within the portions you want. Undersized holes require larger drive torque and danger screw twist-off while oversized holes can lead to thread stripping or screw pull-out. At All Points Fasteners, we provide the widest number of truss head screws out there to accommodate any project need or dimension. Our team of expert, useful service representatives works personally with all of our customers to pick the proper screws to finish your jobs in a hassle-free, inexpensive and timely manner. Sheet metal screws, with their unique features and various purposes, are certainly a marvel of the fastening world. Understanding these screws can unlock new possibilities, enhancing the effectiveness and longevity of your initiatives. In a bind, if you’re wanting the best obtainable screws, you should use a sheet metal screw on wooden. We also offer free product samples to ensure you’re getting the exact screws you need. Value Fastener is your source for industrial and military-grade screws, bolts, nuts, washers, and different premium fasteners. Some wood screws – longer ones – usually have a threadless shank at the prime of them. Sheet metal screws have a completely threaded shank with sharp threads and suggestions that allow them to chop through metal, wood, plastic, and varied different supplies. The dimension of sheet metal screws is commonly shown as a collection of three numbers, these numbers symbolize the diameter, thread depend, and size of the fastener. A sheet metal screw listed as 4-32 x 1-½” has a diameter size of 4, 32 threads per inch, and a length of 1-½”. Sheet metal screws generally vary in size from #2 to #14 in diameter; some head kinds are additionally obtainable in 5/16" and 3/8" sizes. Typical lengths, specified in fractional inches, span from 3/16" to three half". Contact us at present to study extra about what we offer and the way we can work with you to ship high quality screws in bulk for your whole tasks. Sheet metal screws made out of carbon steel are the most common and typically the most economical. These screws are prone to rust and corrosion when exposed to moisture or chemical compounds, so they should typically solely be used indoors. Galvanized or stainless steel screws are designed to withstand rust and corrosion but are inclined to price greater than standard steel screws. Sheet metal screws could also be coated with zinc or nickel to modify their appearance. stainless steel machine screws The diameter, or sheet metal screw dimension, is indicated with a quantity between zero and 24 to explain the shank, although the commonest sizes used by contractors and OEM’s can be 6 to 14. The size is measured in another way depending on the head type of the screw; normally, from beneath the top of the screw to the purpose. In the case of flat or bugle heads, you'd measure the complete length of the screw since it goes to be embedded in the material in it’s entirety. Metal screws differ from wood screws in their design and particular operate, featuring design parts geared towards fastening metal-based materials and exhausting plastics. These are self-tapping screws usually used to secure sheet metal to metal, plastic, fiberglass, wooden, or different materials. Few metal supplies are pre-drilled with holes, so it's typically essential to use screws that may create their own pilot holes for max efficiency. Self-tapping metal fasteners can pierce thin metals with ease by slicing their very own threads and supply a firm maintain. Metal screws are designed to resist the stress of holding collectively heavy metal pieces for an extended interval. Each fastener additionally has a pitch that signifies the number of threads per inch of a fasteners length. Sheet metal screws are designed to securely fasten two or extra pieces of sheet metal collectively. They have a sharp, pointed end that may simply penetrate the metal floor. The two primary kinds of sheet metal screws are self-tapping and self-drilling, every having many features to select from. In short, in case you are making an attempt to connect sheet metal, you must select metal screws. They are simpler to drive into metal and will supply a greater level of strength and safety. On the other hand, wood screws are better suited to functions involving plywood, lumber, and different wood materials.

#stainless steel screws #sheet metal screws #304 stainless steel screws #316 stainless steel screws #stainless steel machine screws #stainless steel sheet metal screws #fine pitch screws #machine screws metric #metric machine screws

[johnsontools]

Vacuum-brazed core bits are designed to cut hard porcelain, tiles, and ceramics using a dry method. The hole opener can be connected using M14 thread, 5/8-11 thread, hex shank, and other connections, making it absolutely compatible with both angle grinders and pistol drills. The surface of the hole opener is skillfully brazed and plated, ensuring its durability and resistance to deformation. More Information: https://www.johnsontoolscn.com Contact us: [email protected]

[ananka-fasteners]

Ananka

Q1) Can hex bolts be used in automotive repair and maintenance?

Ans) Yes, hex bolts can indeed be used in automotive repair and maintenance. Hex bolts, also known as hex head bolts or hex cap screws, are versatile fasteners with a hexagonal head and threads along the shank. They are commonly used in a wide range of industries, including automotive repair and maintenance. Here's how hex bolts are used in the automotive context:

1. Engine Components: Hex bolts are used to secure various engine components such as cylinder heads, intake manifolds, exhaust manifolds, and other parts that require a strong and reliable connection.

2. Transmission and Gearbox: They can be used to secure parts of the transmission system, including the transmission housing, clutch assembly, and gearbox components.

3. Suspension System: Hex bolts are utilized in attaching suspension components such as control arms, stabilizer bars, and shock absorbers.

4. Brake System: They can secure brake calipers, rotors, and other brake components.

5. Chassis and Frame: Hex bolts are used to connect various chassis and frame parts, ensuring the structural integrity of the vehicle.

6. Exterior Accessories: In automotive repair and customization, hex bolts are used to attach exterior accessories like bumpers, grilles, and body panels.

7. Interior Components: They are employed to secure interior components such as seats, seatbelts, dashboard panels, and more.

8. Exhaust System: Hex bolts are used in assembling exhaust components like the exhaust manifold, catalytic converter, and exhaust pipes.

9. Electrical Components: They can secure various electrical components, such as fuse boxes and sensors.

10. Wheels and Tires: Hex bolts are used to attach wheels to the wheel hubs, ensuring a secure connection.

When using hex bolts in automotive repair and maintenance, it's crucial to select the appropriate bolt size, material, and thread type to ensure a proper and safe connection. Additionally, proper torque specifications should be followed to avoid over-tightening or under-tightening, which can affect the integrity of the connection.

In summary, hex bolts play a significant role in automotive repair and maintenance by securing various components, contributing to the safe and reliable operation of vehicles.

Suppliers of Fasteners

Q2) How do you calculate the clamping force of a hex nut?

Ans) The clamping force of a hex nut refers to the force exerted by the nut when it's tightened onto a bolt or threaded stud. This force is responsible for holding together components, providing a secure connection. The clamping force is a crucial parameter in ensuring proper joint integrity.

To calculate the clamping force of a hex nut, you can use the following general formula:

Clamping Force = Nut Factor * Torque

However, it's important to note that calculating the exact clamping force is complex and can depend on various factors such as the coefficient of friction, thread pitch, thread condition, surface finishes, and the material properties of the nut and bolt.

Here's a basic outline of the steps involved in calculating the clamping force:

1. Determine the Nut Factor (K): The nut factor (also known as the friction factor) represents the relationship between the torque applied to the nut and the resulting clamping force. The nut factor takes into account the coefficient of friction between the threads of the nut and bolt. It can vary based on factors such as lubrication and surface condition.

2.Measure the Applied Torque (T): Use a torque wrench to measure the torque applied when tightening the nut onto the bolt. The torque value is usually given in units of Newton-meters (Nm) or foot-pounds (lb-ft).

3. Calculate the Clamping Force: Multiply the nut factor by the applied torque to calculate the clamping force:

   Clamping Force = Nut Factor * Applied Torque

Keep in mind that the nut factor is often determined empirically through testing, as it can vary based on real-world conditions. Additionally, the actual clamping force achieved in a joint can also be affected by factors like thread quality, surface finish, and the condition of the materials being joined.

In critical applications, it's advisable to consult engineering references, manufacturer specifications, or seek expert advice to ensure accurate and reliable clamping force calculations.

Note: The information provided here is a general overview and should not be used for critical applications without proper verification and consideration of all relevant factors.

Fasteners Manufacturers Mumbai

Q3) What is the role of plain washers in preventing fastener embedment into surfaces?

Ans) Plain washers play a crucial role in preventing fastener embedment into surfaces, primarily by distributing the load exerted by the fastener over a larger area. This distribution of load helps to mitigate the risk of damaging or weakening the material being fastened and provides several benefits:

1. Surface Protection: When a fastener is tightened directly against a surface, especially if it's a softer material like wood or plastic, the force from the fastener can cause local deformation, compression, or even create an indentation. A plain washer acts as a buffer between the fastener and the surface, distributing the force and reducing the risk of damage.

2. Load Distribution: The flat surface of a plain washer spreads out the load applied by the fastener. This helps to prevent localized stress points, which could lead to material deformation or failure over time.

3. Embedment Prevention: In situations where a fastener is driven too deeply into a material, such as when over-tightening occurs, a plain washer can serve as a barrier, limiting the extent to which the fastener embeds into the material.

4. Reduced Friction: The washer's smooth surface reduces friction between the fastener and the surface it's being tightened against. This can help achieve more consistent and accurate torque levels during tightening.

5. Alignment Correction: In cases where the fastener hole is slightly misaligned with the receiving hole in the material, a plain washer can help correct the alignment, allowing the fastener to be seated more evenly.

6. Insulation and Vibration Damping: In some cases, plain washers also provide electrical insulation or vibration damping properties, depending on the material they are made from.

It's important to note that the selection of the right size and type of plain washer is critical to achieving these benefits. Washers come in various sizes, materials, and shapes, each suited to specific applications. For instance, a larger diameter washer offers greater load distribution, while a thicker washer can help prevent embedment more effectively.

In summary, plain washers serve as a protective buffer between fasteners and surfaces, preventing embedment, distributing loads, and ensuring a more secure and stable connection. They are essential components in maintaining the structural integrity and longevity of assemblies.

Bolt Manufacturers in India

Q4) How do you calculate the shear strength of a stud bolt?

Ans) The shear strength of a stud bolt, or any fastener, is the maximum amount of force the bolt can withstand before it shears or breaks along its cross-sectional area. Calculating the shear strength involves considering the material properties of the bolt and the cross-sectional area subjected to the shear force. Here's a general formula to calculate the shear strength of a stud bolt:

Shear Strength (τ) = Shear Load (F) / Cross-Sectional Area (A)

Where:

- Shear Load (F) is the force applied parallel to the bolt's axis, causing shear stress.

- Cross-Sectional Area (A) is the area of the bolt's cross-section that is subjected to the shear load.

The shear strength is typically expressed in units of pressure, such as pounds per square inch (psi) or newtons per square millimeter (N/mm²).

Keep in mind that the actual shear strength of a stud bolt can depend on various factors, including the material type, bolt diameter, thread pitch, and surface condition. It's essential to refer to the material specifications and engineering standards to determine the precise shear strength of a specific stud bolt.

In practice, the shear strength of bolts is often provided in manufacturer's specifications or engineering reference materials for various bolt grades and sizes. These specifications are based on extensive testing and analysis of bolt materials under different conditions.

For critical applications, it's recommended to consult relevant standards, engineering handbooks, or seek guidance from experts to ensure accurate and reliable calculations of shear strength for stud bolts.

Eye Bolt Manufacturer in Mumbai

[rpmtrish]

WORX Home and Landscape Holiday Gift Ideas

WORX Home and Landscape Holiday Gift Ideas Carry On Throughout the Season Toronto, ONT – This holiday season, consider a gift that lasts like the WORX® 2.5 Amp .’’..’Oscillating Multi-Tool, the 4V 3-Speed Screwdriver or the Trivac Blower/Mulcher/Vac. These tool gifts are helpful project solvers from home repairs and enhancements to managing the home landscape. A multi-tool that’s capable of handling multiple tasks both indoors and out is the WORX 2.5 Amp Oscillating Multi-Tool. This versatile, user-friendly oscillating multi-tool with the right accessory attached can tackle a wide range of home projects and repairs that call for cutting, sawing, sanding, scraping, rasping, polishing, shaping and removal of grout or adhesives and more. The tool’s top-mounted blade wrench features Universal Fit™ that accepts most other brands’ oscillating tool accessories. Universal Fit accessories can be used with all competitors’ oscillating tools without sacrificing fit or performance. The tool’s built-in blade wrench is thicker and provides a more comfortable grip than an Allen key. This allows the operator to apply up to one-ton of clamping force to prevent blade slippage during use. The WORX multi-tool also features variable speed control and a comfortable, slimmed-down body style. Oscillating speed is set according to the accessory being used and job at hand.  Variable oscillating speeds range from 11,000 to 20,000 OPM (oscillations per minute).  The tool’s oscillating angle is 3.2o. For example, using an end-cut blade, the oscillating multi-tool quickly trims door casings and jambs when installing new wood or tile flooring.  It’s also handy for cutting PVC or copper plumbing pipes.  A semicircle saw blade can be used to make plunge cuts in walls and ceilings for installing electrical boxes and vents, or cutting drywall. The WORX 2.5 Amp Oscillating Multi-Tool (WX686L) comes with a standard wood end-cut blade, sanding pad, three sanding sheets and clip-in wrench.  It is available at CanadianTire.ca. The oscillating multi-tool is covered by the WORX three-year limited warranty. The new WORX 4V Screwdriver has three, digital, pushbutton settings that enable the user to match the cordless tool’s torque, or turning force, to the job at hand. A lighted display provides a choice of three torque levels: one light indicates 22 in-lbs., two lights indicate 33 in-lbs. and three lights  44 in-lbs. The cordless driver weighs only 1.5 lbs. and has a compact, circular, lean body.  It makes short work of installing blinds and drapes, kitchen and bathroom hardware, door sets and hinges, lighting fixtures, electric cover plates and other everyday home projects. The nylon-composite power screwdriver features an overmold rubber handle for a sure, comfortable grip and dual LED lights to illuminate the work area. Twelve ¼-in, hex-shanked bits are included with the tool, along with a blow-molded, plastic storage case. The WORX 4V Max Lithium Screwdriver (WX240L) is available at CanadianTire.ca. The tool is covered by the WORX three-year limited warranty. For the gardener on the holiday list, a time-saving WORX Trivac® 12-Amp 3-in-1 Blower/Mulcher/Vac may be the answer. Consider this: If 16 collection bags were stuffed with leaves, they’d all fit into a single bag if they were picked up by this versatile blower/mulcher/vac, which has a 16 to 1 ratio. This vac’s patented articulating motor provides one-touch, conversion from blower to vacuum. There are no tools required. The yard vac generates high-capacity air volume due to its motor and air siphon design. In fact, with air speeds reaching 70 mph and 600 cubic-feet-per-minute (cfm), the vac virtually eliminates bending over to pick up leaves. With Trivac, all blowing, mulching and vacuuming applications are managed through a single tube. Converting from blower to mulcher/vac is a matter of turning a switch and connecting the 1.4 bushel collection bag. The wide-mouth, unobstructed circular tube design makes it ideal for vacuuming leaves and other yard debris throughout the property, even in hard-to-reach areas, such as under decks, between shrubs and fence lines. The single-stage Trivac features a metal impeller to shred leaves and twigs into fine mulch, which can be used in beds or collected for curbside pickup. The Trivac features a two-speed motor. Level one is best when entering sensitive areas, while the more powerful and aggressive level two is for more demanding blowing and vacuuming/mulching tasks. The combination vac is well-balanced and easy to use.  To improve weight distribution, a shoulder strap is provided. Trivac weighs 9.1 lbs. in blower mode and 9.5 lbs. in vac mode with the collection bag. The WORX Trivac 12-Amp, 3-in-1 Blower/Mulcher/Vac (WG522) is available at CanadianTire.ca. The Trivac is covered by WORX three-year limited warranty. Reach out to WORX social media links by visiting: Facebook: https://www.facebook.com/worxus?ref=hl; Twitter: https://twitter.com/WORXTools; Pinterest: http://pinterest.com/worxtools and Instagram: @WORXTools Read the full article