#fit rotary

[deva-arts]

Testing out CSP Assets hehehe

The city can be pretty beautiful with enough distance and a nice view.

Oh. I forgot what kind of story this was.

She ends up short circuiting the main terminals and letting it crash into a processing facility. Then she takes a stress nap and worsens her insomnia.

#sera in her big girl suit- one she designed herself for once #Reddish Burgundy has always been her favorite color #And the gold comes from the suit's integration with her weapon #There's a very specific reason why all of her weapons are made of that “gold” #One of the rare times you get to see her back for once #That big weaponized drone is an OVR-S; also known as overseer sentinels. They are the eyes in the sky keeping count of everything for OS. #They are rarely used for combat due to the size and inconvenience in battle #but certain exceptions are made for threats like Sera. #She took something far too important from the main OS to be left with all her limbs in one piece and a head full of eyeballs #No opportunities will be wasted. Sera hates these because they rarely have a pilot and often take ages to hack into. #plus they fail spectacularly #one crash from these ships is enough to destroy a city district- they're easily the size of a football field #Even worse yet are the rotary blades used to rudder the ships. They could easily slice her in half- armor and all #She has thankfully managed to avoid dying to them thus far. they usually end up crashing into the ocean and ruining variant imports #sentinels will usually monitor under a more advanced cloaking than the kind given to protected variants #Just under the cloud cover. Sera's cloaking functions the same way if not better thanks to her personal touches on it #Hers is a mix of both illusion and cloaking. in an emergency she could technically walk into a human space as long as she isn't touched #she would be okay unlike most variants who have trouble fitting in because of the city's mandated infrared cameras. #suffice to say there's a lot of things going on in this city that most people- humans and variants alike are none the wiser about. #ARK_SYSTEMA #Seraphinatag

[violet-dragongirl]

tbh the app that was recommended to use with my rotary razor (it's ridiculous but hear me out on this), like...if the data collecting part wasn't in the app I can actually see that app being kinda helpful for transpeeps other than myself who wanna know how to maintain a beard/moustache with it

#irrelevant babble #like...for me it's a bit much and also personally a bit much to have an app for a device such as a rotary razor #BUT...for any newbie at shaving beards or moustaches with a rotary razor like #...I do think it could be helpful to at least get a start on how to use it properly #and maybe get a better technique going for said model and make of the rotary razor #though I will say if ya can just look up yt tutorial vids on it tho and just get any rotary razor that fits ya

[seveneyesoup]

how to make a cropped baby tee out of an oversized tee!!

step 1: don’t

#pinterest has decided i wanna see skinny white girl thrift flip tiktoks #i do not #stop buying big clothes and making them smaller #if you have big clothes already and wanna alter them then whatever #and i’ve seen some show how to make stuff smaller without cutting or sewing #which in theory is better because it doesn’t replace a larger size piece of clothing with a smaller one #but in practice you still bought clothes that don’t fit you and could have fit someone else #so good for whoever gets those pants in a year or two; but until then #a lot of thrift flip tiktok doesn’t know shit about sewing anyway. have you people never heard of a rotary cutter #it pains me to watch

[fozmeadows]

the older I get, the more the technological changes I've lived through as a millennial feel bizarre to me. we had computers in my primary school classroom; I first learned to type on a typewriter. I had a cellphone as a teenager, but still needed a physical train timetable. my parents listened to LP records when I was growing up; meanwhile, my childhood cassette tape collection became a CD collection, until I started downloading mp3s on kazaa over our 56k modem internet connection to play in winamp on my desktop computer, and now my laptop doesn't even have a disc tray. I used to save my word documents on floppy discs. I grew up using the rotary phone at my grandparents' house and our wall-connected landline; my mother's first cellphone was so big, we called it The Brick. I once took my desktop computer - monitor, tower and all - on the train to attend a LAN party at a friend's house where we had to connect to the internet with physical cables to play together, and where one friend's massive CRT monitor wouldn't fit on any available table. as kids, we used to make concertina caterpillars in class with the punctured and perforated paper strips that were left over whenever anything was printed on the room's dot matrix printer, which was outdated by the time I was in high school. VHS tapes became DVDs, and you could still rent both at the local video store when I was first married, but those shops all died out within the next six years. my facebook account predates the iphone camera - I used to carry around a separate digital camera and manually upload photos to the computer in order to post them; there are rolls of undeveloped film from my childhood still in envelopes from the chemist's in my childhood photo albums. I have a photo album from my wedding, but no physical albums of my child; by then, we were all posting online, and now that's a decade's worth of pictures I'd have to sort through manually in order to create one. there are video games I tell my son about but can't ever show him because the consoles they used to run on are all obsolete and the games were never remastered for the new ones that don't have the requisite backwards compatibility. I used to have a walkman for car trips as a kid; then I had a discman and a plastic hardshell case of CDs to carry around as a teenager; later, a friend gave my husband and I engraved matching ipods as a wedding present, and we used them both until they stopped working; now they're obsolete. today I texted my mother, who was born in 1950, a tiktok upload of an instructional video for girls from 1956 on how to look after their hair and nails and fold their clothes. my father was born four years after the invention of colour televison; he worked in radio and print journalism, and in the years before his health declined, even though he logically understood that newspapers existed online, he would clip out articles from the physical paper, put them in an envelope and mail them to me overseas if he wanted me to read them. and now I hold the world in a glass-faced rectangle, and I have access to everything and ownership of nothing, and everything I write online can potentially be wiped out at the drop of a hat by the ego of an idiot manchild billionaire. as a child, I wore a watch, but like most of my generation, I stopped when cellphones started telling us the time and they became redundant. now, my son wears a smartwatch so we can call him home from playing in the neighbourhood park, and there's a tanline on his wrist ike the one I haven't had since the age of fifteen. and I wonder: what will 2030 look like?

#millennials #technology #personal #generations #generational change

[yueyimold]

multi shot SWR rubber rings mold

China 2k mold maker, offer multi shot SWR rubber rings mold, double SWR pipe fitting seals mold, two colour rubber sealing rings mold, two shot SWR seals mold

#China mold #multi shot mold #bi material mold #2 component mold #two color swr rubber rings mold #2k swr pipe fitting seals mold #rotary mold rubber sealing rings #double swr seals mold

[bukuoshin]

AUUUgh, but I actually have to dry my laundry and I'm sososo tired and sleepy

#rae rants #i also have to shave on thursday and put together an outfit by Friday night so like. ugh... #and once i finish washing my clothes i have to put them away cuz ive almost got a full hamper of clean clothes i need to put away as is #and i have to go shopping tomorrow too god forbid. ugh. #i figured out my rotary tool can cut wood so all i wanna do is make dollhouse furniture now and i don't have tiiiiime uuuuUUUGH #not that i have varnish for them yet but still. AND i have earplugs now so i can sand the enamel paint off the dollhouse. but i cant. #because i dont have the tiiiiime #actually. i have to put together another outfit by the tuesday after this upcoming Tuesday too. which i mostly have. #problem being. i need to sew the lining back into the skirt i wanna wear. cuz ig it came off at some point. #it's from the 70s so im not surprised. if anything i'm surprised it fits me. #ugh. i want to buy my zippers too. cuz i have material from the 70's and 80's i wanna make skirts from. and my brown skirt too. #cuz. they don't make brown pencil skirts in my size ig??? not for <$40 anyways. #anyways. point being. i want to do other stuff than what i have to do.

[jacksoncrabb]

Hey, Lets Go Throw Discs This Summer

View On WordPress

#Alberta #Canada #Disc Golf #EDGA #fitness #Hinton DGC #PDGA #road trip #Rotary Park Links DGC #Rundle Park DGC #Stone Creek DGC #Stoney Creek DGC #The Hidden Gem DGC #travel #Wetaskiwin DGC #Wicked Woods #Wildman DGC

[agenselanghidrolik]

KOKOH DAN BERGARANSI !!!, https://wa.me/6281230790812, Pusat Agen Hose Hydraulic, Pusat Distributor Hose Hydraulic, Pusat Penjual Hose Hydraulic Terbaik, Agen Resmi Hose Hydraulic, Distributor Resmi Hose Hydraulic

PT. ALTARA SUKSES SEJAHTERA

Menjual selang hidrolik/hose hydraulic import dari jerman dengan kualitas premium dan tahan lama

Toko Resmi di 

Ruko Sebelah Utara Bank Mandiri

Depan Seberang Jalan MsGlow

Jl. Raya Bululawang, Kabupaten Malang, Jawa Timur 65171

Google maps

https://goo.gl/maps/q7EtH3kPA6ZmBxpFA

Facebook

Web

Call/Wa 

0812-3079-0812

#PemasokTunggalHoseHydraulic, #BosAgenHoseHydraulicKualitasAtas, #SaudagarHoseHydraulicPremium, #PenjualBesarHoseHydarulicPremium, #MenjualHoseHydraulicBerkualitas, #DistributorHoseHydraulikPremium, #JualSelangHidrolikPremium, #AgenBesarSelangHidrolik, #JualSelangHidrolikPremium,#HydraulicHoseAndAssembly

#Selang Escavator #Konektor Selang Hidrolik 90 Derajat #Fitting Hidrolik Tipe Cincin #Konektor Selang Hidrolik Tipe Bulat #Fitting Hidrolik Bertekanan Tinggi NPT #Konektor Selang Hidrolik Tipe Split #Fitting Hidrolik Tipe Tetap #Konektor Selang Hidrolik Tipe Rotary #Fitting Hidrolik Jepit #Konektor Selang Hidrolik Berjumbai

[mixpro]

Welcome to MIX KITCHEN INTERNATIONAL, the leading provider of high quality bakery equipments in Nigeria! If you're looking for reliable, efficient, and durable baking machines to elevate your bakery business, you've come to the right place.

At MIX KITCHEN INTERNATIONAL, we understand the importance of having top-of-the-line equipments that can help you create delicious and mouth-watering baked goods. That's why we offer a wide range of products that cater to all your baking needs - from bread making to pastry production to cake decoration, we've got you covered.

Our equipments are made using the latest technologies and finest materials, ensuring that they can withstand the demands of a busy bakery. With features like digital controls, automatic timers, and adjustable speed settings, our machines make baking a breeze and deliver consistent results every time.

We also take pride in our exceptional customer service, providing you with the support you need to make informed decisions about your bakery equipment needs. Whether you're a small startup bakery or an established business looking to upgrade your equipments, our team of experts are always ready to help.

So why wait? Join the many satisfied customers who trust MIX KITCHEN INTERNATIONAL for their bakery equipment needs. Contact us today 09163822139 by Calling or WhatsApp to learn more about our products and services!

#Dough Moulder Machine #Deck Oven #Dough Mixer Machine #Rotary Rack Oven #Dough Divider Machine #5 Fit Working Table #Bread Slicer Machine #Cake Chiller Machine #Food Warmer Machine #Food Dehydrator Machine #Ice Cream Machine #Oven Trays #50 Kg Dough Mixer Machine #25 Kg Dough Mixer Machine #100 Kg Dough Mixer Machine #12.5 Kg Dough Mixer Machine

[vampire-core]

for the bingo what abt henry communications?

[character opinion bingo!]

[id: a character opinion bingo with the following squares marked off: they got done dirty by the fans, they got done dirty by the creator/s, they work better as part of a dynamic, free space, i like them but i don't really think about them much, and i don't really have much to say about them /end]

honestly while i do still have a big soft spot for communications, looking back i feel like a lot of the characters were pretty underdeveloped .. i think the series was interesting conceptually but just such a disaster in practice that a lot of the characters' potential just got wasted. and fans just sort of watered them down and meme-ified them even more which really didn't help SDJFHGSDJF also the dynamic part is because being fully honest . henry is bland as FUCK without the other case two characters . nancy is too to a degree but henry even moreso

ty for the ask !! :3c

#text #ask meme #kitty's mailbox #anonymous #id for the full bingo in the original post ! #i think a big part of why henry is so bland is because in original hwr the husband wasn't really meant to be a Character he was just like #a reason for gumi to be breaking down . so when hwr actually gained more plot outside of a one-off song ghost kind of had to figure out- #-a character who fit In that role #and then made rotary dial which gave Frances character #but with black and white being technically the last case one song made ( since 2016 hwr was just a remake ) henry ended up being more a- #-plot object for frances and nancy more than anything else shfjsdf

[carsthatnevermadeitetc]

Chevrolet Corvette XP-897 GT Two-Rotor Concept, 1973. Presented at the IAA in Frankfurt 50 years ago this week, a prototype for a rotary-powered mid-engined Corvette that had been made by Pininfarina. The concept had been built over the platform of a Porsche 914 and fitted with a 2-rotor version of GM’s Wankel engine. The project went no further as General Motors abandoned their rotary engine program and it would be another 46 years before a mid-engine Corvette would go on sale

#Chevrolet #Chevrolet Corvette #concept #prototype #Pininfarina #design study #mid engine #rotary engine #General Motors #IAA #1973 #50 years ago #Frankfurt Motor Show #Chevrolet Corvette XP-897 #Chevrolet Corvette 2-Rotor #IAA73

[niymue]

hii! i have a cc finds request for clutter that would fit an elders home if you're up to it/still doing requests ♡

elder home clutter finds ♡

pressed flowers

ribbon, pin cushion

hat box

vintage coffee set

pot holders

yarn

little jar

vintage apple clock

sewing kit

slippers

care package

jam jar

old computer

brush and soap

rotary phone

#i love these requests #i hope u like it <3 #cc recs #ts4 cc finds #cc finds #ts4 clutter #if the links -dont- work dm me

[eufiemoon]

How to Make: Electronic Wings for Cosplay

Hello Everyone! It's been a while since I last uploaded a written tutorial on here and since I just finished and wore my Dame Aylin cosplay this last weekend it seemed appropriate to jump back in with a tutorial on one of the costume pieces!

Her wings were the star of the show this weekend and I know a lot of people were curious about how I made them! A huge source of knowledge and inspiration behind these wings was this video by Axceleration, I made a few changes to the frame shape and electrical circuitry for mine but her tutorial was a huge stepping stone to give me the confidence to tackle them myself!

Health and Safety:

When working with Sintraboard (as well as other thermoplastics) it is incredibly important you wear a respirator as well as goggles when heating, moulding and cutting it. The fumes this plastic will give off when heated up are no joke! Make sure you're in a well-ventilated space!

Basic tool safety knowledge is also really important! wearing gloves when using power tools can be more dangerous in most situations, so always be aware of where your hands are vs where the tools are. Always cut away from yourself and take things slowly, don't panic.

Electrical safety! You're working with live wires and circuitry! make sure your hands are dry, you aren't touching the bare wires at any point when they are connected to a power source, and if you choose to solder anything, make sure you're wearing heat-proof gloves and a mask in a ventilated space!

Tools

Wire stripper

Screwdriver and wrench

Dremel - I recommend the Dremel 3000 rotary tool personally! Some essential Dremel bits you'll need for this include, a sanding bit, drill bit (smaller or same size as your screws/bolts), and a small/narrow cutting bit. These will usually come with the Dremel!

Heat Gun (A hairdryer will not get hot enough to heat the Sintraboard!!)

Pipe cutter (alternatively you can use a hacksaw for this!)

Hacksaw

Ruler

Scissors (for cutting fabric straps)

Materials

Heat shrink Tubing

2 core electrical wire

switch (you want a three position, six pin switch, like this one, even better if it has the Screws on the pins! otherwise you'll need a soldering kits to solder the wires to the pins.

2x 8AA 12v Battery Holders

2x 12v Linear Actuators (Mine had a stroke length of 100mm)

21.5mm PVC Pipes (I got 2x 3m Lengths)

2x 21.5mm PVC Pipe straight couplers

6mm 8"x12" Sintraboard

Nuts/Bolts/Screws (I used M5 bolts for the base & Actuator connectors and M6 screws to attach the hinges to the pipes! You'll need Washers for every Nut & Bolt!)

Hinges (I used 2.5cm wide hinges that were skinny but long so they would just about fit along the PVC pipe! 3" gate hinges would work!)

50 metre Polythene Jiffy foam roll (in retrospect this was ALOT of foam, you could definitely get away with maybe a 20-30 metre roll! I now have a load leftover XD)

16 AA Batteries (I used 16 and had enough for the whole day with them on, I think They'd probably be enough for another half a day-full day too! but have spares just in case!)

Webbing strap ( I went for grey to match my base suit colour!)

Buckle - as wide as the webbing strap you use!

3 metres of white cotton fabric (or whatever colour wings youre going for!)

Optional

Zipties (for cleaning up the wires)

Lets Go!

Sintraboard is this wonderfully stable thermoplastic that is relatively easy to cut into (with the right tools) and when heated allows you to mould its shape! I started by using a mannequin and heating the Sintraboard with a heat gun for a few minutes to make it pliable, I recommend using gloves for this part as the materials gets VERY HOT! Press the board into the shape of the mannequin's back, taking note of the edges especially! you want this board to sit as comfortably to your body shape as possible as it makes a huge difference to how long you can wearing the wings for in this backplate is comfy!

Once shaped, I placed it against my back to make sure it was a good fit, heating again and making any alterations I needed (again don't place bright hot plastic to your bare skin! wear protective clothes and wait till its slightly cooler to do this, with the help of a friend!). I then took a hacksaw and rounded the corners, before sanding the edges with my Dremel! Try to avoid cutting off loads, just enough to make things less likely to snag.

3. I then cut in four holes, wide enough to feed my webbing strap through, two at the top and one on either side below where my arms would sit! I measured the webbing strap by firstly feeding them through the top holes and pinning them, and then bring the strap over my should to everything sits where it should and seeing where the strap hits the side hole and cutting the length there! you'll also want a strap that attaches across the chest, meeting in the centre with a buckle!

4. After sewing the straps closed I was able to move onto the PVC pipe structure! This may change slightly depending on the finished shape you want but I needed the PVC pipes to come out from inside a breastplate so had a particularly angle as well as character references to work with! I began by heating the pipe over my heat gun and flattening a portion of it under a heavy object so it would sit much more flush against the backboard and sit better underneath my breastplate before moving onto securing the first portion of the structure to the backplate. This mainly involved lots of try-ons and measuring to make sure the angles were correct and symmetrical and was quite fiddly but well-worth the effort! I'll include a diagram of the general shape I went with below:

5. I wanted my wings to be relatively modular for ease of travel so I needed to make sure certain portions of them could come away from other parts easily, so I popped a straight coupler on the top of the pipes that were attach to the breastplate, this also meant I could slot the breastplate over these shorter pipes and wear everything correctly! Then these second pipes slot on and at the other end they are attached via hinges to the longest portion of the pipe 'skeleton', Diagram below:

6. Now that the skeleton was put together, it's time for the electrical stuff! It's a good idea to figure out where your circuit is going to lay on the skeleton - consider if you want the battery packs mounted the the backplate or, like me, put them inside the actual wings in removeable pockets for easy access and removal for battery changes. all your wires will go through the switch so deciding where you want to place that is very important! Mine was placed just over my shoulder on the front side, mounted to the PVC pipe with a metal cover I drilled a hole into to slip the switch through and then drill through the pipe.

I've included another diagram below that explains all the electrical circuitry, including which wires go on which pins on the switch!

Important to note: The linear actuators need to be placed and bolted into the PVC pipes at *exactly* the same angle on each side, any slight deviation will lead to the wings going up wonkily! So take your time and make as many adjustments as necessary.

7. You can extend your wires by adding on the electrical wire, just match the colours, and put heat shrink tubing over the connections to hide the live wires! I ended up zip-tying the wires into organised bundles once the wings were done to help keep everything safe from snags.

8. Now its time for the Wings themselves! I drafted my base pattern by just draping the white cotton fabric I had over the wing when it was fully extended. I then pinned the wings to the shape I wanted them to be along the bottom before cutting along the pins. I ran the fabric through my sewing machine to close the bottom edge, leaving a gap wide enough by the wing base so I could slip the wing on and off, closing it with velcro. I also added little fabric pockets inside of these to hold my battery packs, which also connected via velcro for easy removal!

9. Now that I had a wing base I was able to begin making feathers! I cut out a total of 800 feathers out of polythene jiffy roll for these wings, in 6 different styles and using real life bird wings to dictate the shapes I used and where I placed them. I ended up hot gluing every individual feather onto the white fabric base, going row by row until every side was covered, the wing covers themselves are super light because of the foam feathers and they shine light through them in a really magical way!

Optional: I also ended up going over these feathers with my airbrush and some super light beige paint to help darken the shadows, this is entirely optional and may change depending on the wings you're looking to make!

When in neutral position and in extended position the wings looks like this:

Mine had a wingspan of about 7ft total when fully extended but when in neutral position they were fairly close to my own proportions! mainly staying behind me and weren't much of a problem in a packed con hall!

Photo by: Helloimfran (on Instagram and Twitter)

I hope this tutorial helped and if there are any questions about anything in specific don't hesitate to reach out at [email protected] or on my instagram or twitter (@eufiemoon)

Happy Crafting!

#cosplay #cosplayer #cosplaying #baldurs gate iii #baldur’s gate 3 #baldurs gate 3 #bg3 #dame aylin #aylin x isobel #bg3 aylin #cosplay tutorial #Wings #fantasy #tutorial #cosplay help #cosplay tips

[moongreenlight]

Insane reader my beloved. Literally my babygirl.

@katz-chow been ruminating on this one just for you <3

CW: Gore and violence

Reader who shows up late to their first meeting with the task force. Rolls up in their dark sedan with blacked-out windows and one too many dents on the front bumper wearing civvies instead of the uniform they were given and instructed to wear.

Reader who is a privately hired detective with a talent for interrogations. Not officially a member of the task force or the military because the tactics they use are far less than legal. More a secret weapon on retainer for when doing things by the book doesn’t do the trick.

Reader who gets on the good sides of the task force boys by being sugary sweet and barely hiding their true colors. Skins and bleaches the skulls of interrogations gone South and gives them to Ghost insisting they’re better than the costume store shit he’s got on now.

Gifts Price expensive cigars tucked between the fingers of a severed hand. Drops them off in large pink boxes with delicate ribbons and giggles when he asks a thousand questions about why and how and what the fuck he was supposed to do with this.

Tosses Gaz new knives on the field when they’ve landed a kill or just wrenched them out of someone’s stomach. They make a game out of chucking the gore-slicked blades at one another’s heads to see if they can dodge in time.

Starts playing dodgeball with Soap where they toss his less-stable bombs and unpinned grenades back and forth. Only stops after they’ve accidentally blown up the camp two missions in a row. (Also heavily rumored they have tramp stamps of each other’s names because they’re both too stubborn to back down from a dare but that’s just for vibes)

Reader who gets flown out on specialty missions where a hostage really refuses to talk and takes matters into their own hands. Sometimes hopping on radio when they’re in transit and requesting the force pulls extra men so they can play a live game of operation. They’ve been watching videos on the dark web and the first two seasons of Grey’s Anatomy from their military issued laptop so it’s like an 80% chance all the hostages live.

Reader who stops being allowed to train rookies because the first and only faux-deployment they led they told the group they ran out of rations three days in to a two week long training and they had to play rock-paper-scissors to create a bracket of people to eat first. The mission gets called early when Price gets word that there was actually a field amputation done. Reader doesn’t even apologize, just laughs their way through a barely reasonable explanation. I didn’t think they’d actually do it.

Reader who begs the boys to let them play kill, kiss, marry, kill in the middle of a boring interrogation and when they get told no or to focus on the task at hand, they throw such a fit that they end up sending a screwdriver through the eye of the person they’re supposed to be interrogating.

Reader who brings their own kit to interrogations. Lugs around pincers, rusted blades, rotary bone saws, and dull axes in a flamingo pink toolbox. Sets it up on a small table in front of the hostage and unboxes it like an influencer showing off PR.

Reader who also stops being able to run conditioning and drills with rookies because they pitted the privates against one another during a sparring session. Saying something about whoever could sheath a blade in the other first got a bonus check before tossing a few knives on the mat and walking away. Gaz had to run over and tell them you weren’t serious when he saw blood.

Reader who insists on being able to puppeteer the decapitated head of an enemy grunt they took down and reciting a few lines of Shakespeare to the boys. Dragging the mission out because they know as well as the boys do that everyone is on their timeline.

Reader who dances around hostages that have been zip tied to chairs and beat within an inch of their life. Singsonging threats and having the boys drag the limp bodies of their chain of command across the floor.

Reader who pouts when their victims pass out during questioning after a few of their fingers have been chopped off with a butcher’s knife. Huffs like they’re being put through a massive inconvenience and fishes smelling salts out of their toolkit to wake the poor sap back up.

#gn!reader but soooooooooo babygirl ykwim? #cod mw2 #moongreenlight #moongreenlightwrites #call of duty #cod x reader #141 headcanons #drabble

[yueyimold]

bicolors contigo bottles twist cover mold

China bi mold maker, offer 2 component leak proof sports bottle lid, multi shot outdoor water bottle cap, 2 color contigo fit shake closure mold, 2k contigo bottles twist cover

#China mold #two color mold #2 component mold #bi material mold #multi shot mold #two color leak proof sports bottle lid mold #2k outdoor water bottle cap mold #rotary mold contigo fit shake closure #double contigo bottles twist cover mold

[zimcard-artblog]

I've pulled a Callum Crown and Dial-Up'ed these fellas. Had this in my head for awhile and now I've drawn the scrybes if they were in the DT universe.

Grimora has an old typewriter for a head, of course, while running a small shop involving ghoulish items and even presenting pre-dial up collections for educational purposes. She would definitely get along with Gabby from the Phone Antique Shop down the street, have a nice cup of tea with the woman. She used to write obituaries back in the day, using both her head and quill to edit the papers, yet she moved onto opening her own shop as time passes by.

P03/Poe made designed its own monitor head fit to his needs, one of them being customizing icons to indicate who is currently fronting as he has DID. His prosthetic arm is actually Crown brand as he used to admire Callum Crown for a bit before working on his own things, owning a workshop to fix up tech and make his own gadgets. The stickers on his electric wheel chair were mostly from G0lly and even Unfinished Boss (the scratched doodles on the side of the chair.)

Leshy is, of course, the Leshy. How did the Dial-Up get to build a camera head onto his shoulders? Same reason how they managed to get BIGFOOT to have an object head during the Dial-Up. You know what they say: "If they could get Bigfoot to have an object head, they could definitely get Forest Peepaw". His camera head has some overgrowth there- which is good.

Magnificus has an antique rotary phone head he had customized in the past to his own liking. He is a street artist and also a hobo, yet still respected as an aspiring artist since he used to be quite the famous painter back in the days. He takes his current life as a boring yet deserved break but people refuse to leave him alone, wanting to know more about his works and most importantly the rumors of his past career. He has three fans who constantly approach him and ask numerous questions along with his criticism towards their own works.

Lonely Wizard, Pike Mage, and Goobert are huge wizard fans who have DnD sessions every now and then- hence the wizard hats. LW has a magic 8 ball for a head and is often known for its little performances involving singing and dancing, theater kid and whatnot. Pike has a Pike Weapon for a head which does raise the question if she's from the Dialtown Mob or not, often found talking to other weapon headed folks. Goobert has more of a rotary phone but shaped as a paint palette, having tried to customize his own head to match Magnificus' but it didn't turn out super well, he's an art student trying to paint.

Luke Carder has a Camcorder for a head, reflecting his career as a youtuber. Nothing has changed much as he's still the same guy who opens card packs.

Kaycee has a Floppy Disk Drive as a head and is also an indie game developer, she's doing her best in this dumpster fire of a town. Hah. Get it? Cause-- yeah.

More to come involving these AND working on Scrybing the Dialtown folks- making them Inscryption themed >:]

#ZCArt #Fanart #Inscryption #Dialtown #InDialtown AU #Leshy #Grimora #Magnificus #P03 #Lonely Wizard #Pike Mage #Goobert #Luke Carder #Kaycee Hobbes #Digital Art